Axio 2007 Heavy Duty Springs Ex-Japan
KSh10,000.00 Buy Via Whatsapp- Coil Spring Design Profile: Cylindrical, Linear Rate Heavy-Duty Aftermarket Coil Spring configuration.
- Wire Cross-Section Diameter (Thickness): 13.0 mm (Front Axle) | 12.5 mm (Rear Axle). Heavy-duty reinforced specification; increased from the standard factory stock diameter to lift load capacity.
- Spring Outer Diameter (Ø): 142 mm (Front) | 106 mm (Rear).
- Total Free Uncompressed Length (Height): 345 mm (Front) | 335 mm (Rear).
- Total Active Coil Windings: 5.5 coils (Front) | 7.5 coils (Rear).
- Material Composition: Induction-hardened 54SiCr6 / 55CrSi High-Tensile Silicon-Chromium Spring Steel alloy, finished with an impact-resistant, anti-corrosion gloss powder coating layer.
- Spring Load Rate Classification: Heavy-Duty / Reinforced Cargo & Rough-Road Specification (Ex-Japan aftermarket source).
- Spring Stiffness Constant (Rate): 31 N/mm (Front) | 28 N/mm (Rear). Engineered with a 25% to 35% increase in load-bearing stiffness compared to the highly compliant factory JDM setup.
- Primary Mechanics Profile: Specifically calibrated to eliminate rear-end sagging under full passenger load or cargo capacity, minimize vehicle body roll during cornering transitions, and maximize ground clearance over uneven road infrastructure.
- Toyota Platform Series: Tenth-Generation Toyota Corolla Axio Sedan (NZE141 1.5L 2WD / ZRE142 1.8L 2WD / NZE144 1.5L 4WD / ZRE144 1.8L 4WD series).
- Cross-Platform JDM Twins: Directly cross-compatible with the corresponding Toyota Corolla Fielder (NZE141G / ZRE142G / NZE144G) station wagon platform of identical production years.
- Toyota Factory Standard Base Part Roots (For dimensional reference): 48131-12A60 (Front) | 48231-12A50 (Rear).
- Premium Aftermarket Heavy-Duty Alternatives:
- OBK (Osaka Bane Inc.) Heavy-Duty Coil: Blue-painted reinforced aftermarket catalog series.
- Cobra Springs Heavy-Duty Series: Specialized reinforced performance specification matrices matching NZE141 parameters.
- Lesjöfors Heavy-Duty Coil Reference: 4292601 (Front) | 4292618 (Rear Heavy Duty/Cargo alternative series).
Axio Heavy Duty Springs, Model 2007
-
High-performance replacement coil springs designed to beef up the suspension of the Toyota Axio, providing a firmer ride and permanent solution to "bottoming out" on speed bumps.
-
Condition: Genuine Clean Ex-Japan (High-tension reinforced steel, minimal wear).
-
Compatibility: Perfectly suited for the 2007 Toyota Axio (NZE141 / ZRE142 series).
-
Performance: Provides an immediate lift to eliminate "squatting" under load, improves stability on rough roads, and protects the undercarriage.
-
Price: KSh 10,000 (Set/Pair).
Toyota Axio NZE161 Wheel Hub Assembly
Restore the silent, comfortable ride of your Toyota Axio NZE161 with our premium Ex-Japan Wheel Hub Bearing. Sourced from low-mileage vehicles in Japan, these genuine assemblies are designed specifically for the 160-series chassis. At KSh 4,000, you get an original OEM part with factory-sealed bearings that provide a vibration-free ride—offering far better durability and safety than generic local replacements.
Toyota Axio NZE161 Wheel Hub Assembly
Toyota Axio (NRE161/NZE161) Heavy Duty Coil Springs
Eliminate sagging and improve your Toyota Axio 161’s ground clearance with these Heavy Duty Coil Springs. Sourced as Clean Ex-Japan units, these springs provide superior tension and durability for better stability on Kenyan roads.
-
Price: KES 10,000 (Set)
-
Condition: Clean Ex-Japan (High-tension / Like New)
-
Compatibility: Toyota Axio Model 161 (NRE161, NZE161, NKE165)
-
Location: Taleon Autospares, Nairobi
Axio Model 2007 Steering rack
Restore your steering precision with this Clean Ex-Japan Steering Rack for the 2007 Toyota Axio. Sourced directly from Japan, this genuine assembly offers the smooth, responsive handling your vehicle deserves.
-
Price: KES 15,000
-
Condition: Clean Ex-Japan (Low mileage & pressure tested)
-
Compatibility: Toyota Corolla Axio (2007 / NZE141 series)
-
Stockist: Taleon Autospares, Nairobi




