Sort

Harrier 240 Steering Rack

KSh25,000.00
Core Engineering Specifications
  • Steering Gear Type: Rack and Pinion
  • Operating Mode: Hydraulic Power Steering (HPS)
  • Steering Wheel Lock-to-Lock: 2.88 turns
  • Drive Layout: Built for Right-Hand Drive (RHD) configurations
  • Total Length: 1105 mm
  • Net Weight: 6.6 kg to 8.0 kg (varies by manufacturer) [1, 2, 3, 4, 5]
Fitment & Component Dimensions
  • Tie Rod Thread Size: M16 x 1.5
  • Input Shaft Height: 48 mm
  • Input Shaft Diameter: 17.4 mm
  • Input Shaft Splines: 36 teeth
  • Input Shaft Connector: Toothed
  • Original Equipment Manufacturer: NSK [1, 2]
Part Numbers & Interchangability
  • OEM Part Numbers: 44200-48080, 44200-48150, 40120-48080
  • Vehicle Platform Compatibility: Toyota Harrier 240G (2AZ-FE engine), Toyota Kluger V, Lexus RX300, Lexus RX330, and Lexus RX350.

Harrier 240 Engine Mountains

KSh4,000.00
1. Front Engine Mount (Radiator Side)
  • Design Architecture: Active Vacuum-Controlled Hydraulic Mount (Liquid-Filled)
  • Functional Mechanics: Features an internal fluid chamber connected to an engine vacuum line. The internal valve dynamically switches stiffness to dampen engine vibrations at idle speed and firms up under load.
  • Genuine OEM Part Numbers: 12361-28110, 12361-28220
  • Aftermarket Cross-References: RBI (T09A03F), Febest (TM-MCU30F)
2. Rear Engine Mount (Firewall Side)
  • Design Architecture: Heavy-Duty Hydraulic Mount (Liquid-Filled)
  • Functional Mechanics: A passive multi-chamber hydraulic isolator that counteracts structural engine block rotation and torque pullback during acceleration and braking.
  • Genuine OEM Part Numbers: 12371-28060, 12371-28240
  • Aftermarket Cross-References: RBI (T09A03R), Febest (TM-ACU30R)
3. Right Engine Mount (Timing Belt / Engine Pulley Side)
  • Design Architecture: Solid Vulcanized Natural Rubber with Integrated Aluminum Bracket
  • Functional Mechanics: Serves as the primary weight-bearing structural mount supporting the engine block to the inner body frame rail.
  • Genuine OEM Part Numbers: 12305-28120, 12305-28130, 12305-28230
  • Aftermarket Cross-References: RBI (T09A03RH), Febest (TM-ACU30RH)
4. Left Engine Mount (Gearbox / Transmission Side)
  • Design Architecture: Solid Rubber Core / Anchor Bracket Design
  • Functional Mechanics: Supports the weight of the automatic transaxle housing and manages horizontal transmission shift load shifts.
  • Genuine OEM Part Numbers: 12372-28020, 12372-28200
  • Aftermarket Cross-References: RBI (T09A03LH), Febest (TM-ACU30LH)
Material & Metallurgical Composition
  • Rubber Element: Premium Natural Rubber (NR) compound featuring a 55–65 Shore A durometer rating for balance between structural durability and resonance dampening.
  • Metal Casting: High-pressure die-cast aluminum alloy bracket bodies paired with stamped structural carbon steel base plates.
  • Surface Coating: All steel components are treated with a black anti-corrosion phosphate or electrophoresis layer to prevent moisture rust degradation.

Harrier 240 Rear Shock

KSh5,000.00
Core Architectural Specifications (Rear Struts)
  • Suspension Layout: Independent MacPherson Strut rear suspension system.
  • Internal Shock Mechanics: Gas-Charged Twin-Tube low-pressure nitrogen gas configuration (engineered to eliminate hydraulic fluid aeration and foaming on rough terrain).
  • Strut Assembly Design: Structural Suspension Strut (acts as a load-bearing member with an integrated lower spring seat plate).
  • Mounting Configuration: 3-bolt upper chassis tower pattern paired with a bottom dual-bolt steering knuckle mounting bracket.
  • Orientation: Asymmetrical, side-specific Left Hand (LH) and Right Hand (RH) directional assemblies.
Generation-Specific Chassis Variations (Harrier 240 / 2.4L 2AZ-FE)
The mechanical valving and mounting dimensions are split across the two primary production generations:
1. First Generation: X10 Platform (1997–2003) — ACU10 (2WD) / ACU15 (4WD)
  • Standard 2WD Aftermarket KYB References:
    • Rear Right Hand (RH): 334261
    • Rear Left Hand (LH): 334262
  • Standard 4WD Aftermarket KYB References:
    • Rear Right Hand (RH): 334243
    • Rear Left Hand (LH): 334244
  • Factory Genuine OEM Reference Roots: 48530-49035, 48540-49035.
2. Second Generation: X30 Platform (2003–2013) — ACU30W (2WD) / ACU35W (4WD)
  • Standard 2WD Aftermarket KYB References:
    • Rear Right Hand (RH): 334400
    • Rear Left Hand (LH): 334401
  • Standard 4WD Aftermarket KYB References:
    • Rear Right Hand (RH): 334394
    • Rear Left Hand (LH): 334395
  • Factory Genuine OEM Reference Roots: 48530-49275, 48530-49285, 48540-49195.
Structural Fastener Installation Torques
  • Strut-to-Steering Knuckle Clamp Bolts (Bottom dual-bolts): 252 Nm (186 ft-lbs).
  • Upper Chassis Tower Flange Mounting Nuts (3-bolt layout): 39 Nm (29 ft-lbs).
  • Center Strut Piston Rod Retaining Nut: 49 Nm (36 ft-lbs).

Harrier 240 Steering Rack Ex-Japan

KSh20,000.00
Core Architectural & Mechanical Specifications
  • Steering Mechanism Design: Hydraulic Power Assisted Rack and Pinion Steering Gear Assembly.
  • Drive Configuration Layout: Engineered strictly for Right-Hand Drive (RHD) Japanese Domestic Market (JDM) chassis profiles.
  • Steering Wheel Responsiveness: 2.88 turns lock-to-lock (total steering wheel rotations).
  • Net Gear Weight (Bare Assembly): 6.6 kg.
  • Casing/Housing Composition: High-strength cast Aluminum alloy integrated with specialized iron sleeve structural sleeves.
  • Tie Rod / Thread Sizing: M16 x 1.5 inner tie rod thread metric. [1, 2, 3, 4, 5]
Chassis Generation-Specific Compatibility
The "Harrier 240" designation indicates models running the 2.4L 2AZ-FE inline-4 engine. The steering rack specifications split cleanly into two distinct generations: [1, 2]
1. First Generation: X10 Platform (1997–2003) — ACU10 (2WD) / ACU15 (4WD)
  • Assist Technology Type: Standard high-pressure conventional hydraulic system.
  • Primary OEM Part References: 44250-48010, 44250-48080, 44200-48031.
  • Interchangeability: Directly cross-compatible with the Lexus RX300 (MCU10 series) and the Toyota Kluger V platform of identical production years. [1, 2, 3, 4, 5]
2. Second Generation: X30 Platform (2003–2013) — ACU30W (2WD) / ACU35W (4WD)
  • Assist Technology Type: Low-mounted proportional-flow hydraulic system configured for enhanced high-speed stabilization.
  • Primary OEM Part References: 44200-48080, 44200-48150, 40120-48080.
  • Interchangeability: Shared architecture directly swappable with the second-generation Lexus RX330, RX350, and MCU30-series Toyota Harrier assemblies. [1, 2]
Ex-Japan Inspection Standards & Seals
  • Fluid Seal Profile: Highly dynamic, heat-resistant Nitrile rubber (NBR) triple-lip seals engineered to withstand hydraulic fluid line pressures upwards of 8.0–9.0 MPa.
  • OEM Valve Integration: Features an integrated internal rotary control valve to mechanically meter fluid assist based on twist torque from the intermediate steering column shaft.

Harrier 240 Steering Rack

Original price was: KSh23,000.00.Current price is: KSh20,000.00.

A high-durability hydraulic rack and pinion assembly designed to eliminate steering "play," fluid leaks, and knocking sounds common in high-mileage Harriers.

  • Condition: Genuine Clean Ex-Japan (Imported, pressure-tested for hydraulic integrity, and seals verified for zero leakage).

  • Compatibility: Specifically fits the Toyota Harrier 240G (ACU30 / ACU35) models produced between 2003 and 2012.

  • Performance: Restores firm, responsive steering; eliminates heavy steering issues at low speeds and ensures smooth hydraulic assistance.

  • Price: KSh 20,000 (Unit).

Harrier 240 Rear Shock

Original price was: KSh7,000.00.Current price is: KSh5,000.00.

Genuine Toyota Harrier 240 Rear Shock Absorber (Ex-Japan) Restore the luxury ride of your Harrier with this Grade A Ex-Japan rear shock absorber. Sourced from low-mileage vehicles in Japan, this genuine unit is specifically valved for the ACU30 series. It offers superior road-holding and vibration dampening compared to generic alternatives, ensuring your SUV maintains its signature smooth and stable feel.

  • Condition: Grade A Ex-Japan (Tested & Leak-free)

  • Compatibility: Toyota Harrier 240G / 300G / 350G (2003–2012) | Chassis ACU30, MCU30, GSU30

  • Position: Rear (Left or Right)

  • Price: KSh 5,000

Please select your product
Product has been added to your cart
Compare (0)