Mazda Demio Model 2018 Crossmember Mountain
KSh4,000.00 Buy Via WhatsappComponent Overview & Construction
- Component Type: Front Suspension Axle Subframe Member / Engine Carrier Support Cradle.
- Material Composition: Stamped high-tensile structural steel.
- Mounting Design: Multi-point isolated perimeter layout containing factory press-fitted, high-density elastomer damping rubber bushings.
Part Numbers & Identifiers
- Primary OE/OEM Reference: DA6A-34-80X (or DA6A3480X).
- Alternative / Factory Variation Numbers: DA6A-34-800, DB2R-34-80X, DB2R3480X.
- Component Interchange Warning: The crossmember layout changed between generations. A front crossmember from the prior generation (DE Series) will not interchange with the 2018 DJ Series vehicle.
Platform & Vehicle Compatibility
- Chassis Platform: Mazda DJ Platform (SkyActiv-Chassis architecture).
- Model Codes: DJ3FS, DJ5FS, DJ3AS, DJ5AS, DJLFS.
- Model Range Variants: Demio 13C, 13S, XD, Touring, Touring L Package, and 15MB.
- Production Range: 2014–2019 (Japan-market Demio nameplate, later renamed globally as the MAZDA2).
- Cross-Brand Footprint: Shares basic structural architecture and mounting geometric parameters with the Toyota Yaris iA / Scion iA (North American variants co-developed on this SkyActiv platform).
Powertrain & Alignment Specifications
- Compatible Engine Applications: 1.3L Petrol (P3-VPS), 1.5L Petrol (P5-VPS), and 1.5L SkyActiv-D Clean Diesel (S5-DPTS / S5-DPTR).
- Drivetrain Constraints: Configured for Front-Wheel Drive (FF) models, with altered structural clearances on the "AS" suffix all-wheel-drive (4WD / AWD) chassis codes.
- Baseline Alignment Settings (Unladen Member Geometry):
- Camber: -0°05' (Acceptable factory tolerance: -1°05' to +0°55')
- Caster: 4°20' (Acceptable factory tolerance: 3°20' to 5°20')
- Total Toe-In: 1.0 mm to 3.0 mm
Tightening Torque Specifications
- Main Subframe-to-Chassis Structural Bolts: 115 Nm to 140 Nm {85 to 103 ft-lbs} (Two-stage torque-to-yield tracking on primary frame mounting layers).
- Steering Rack Gearbox to Subframe Connecting Bolts: 75 Nm to 104 Nm {56 to 76 ft-lbs}.
- Sway Bar Center Bracket-to-Crossmember Fasteners: 33 Nm to 42 Nm {24 to 31 ft-lbs}.
- Lower Control Arm Rear Pivot Bolt (Large Bushing): 135 Nm to 160 Nm {100 to 118 ft-lbs}.
Mazda Demio Model 2017 Crossmember Mountain
KSh4,000.00 Buy Via WhatsappComponent Overview & Construction
- Component Type: Front Suspension Axle Subframe Member / Engine Carrier Support Cradle.
- Material Composition: Stamped high-tensile structural steel.
- Mounting Design: Multi-point isolated perimeter layout containing factory press-fitted, high-density elastomer damping rubber bushings.
Part Numbers & Identifiers
- Primary OE/OEM Reference: DA6A-34-80X (or DA6A3480X).
- Alternative / Factory Variation Numbers: DA6A-34-800, DB2R-34-80X, DB2R3480X.
- Component Interchange Warning: The crossmember layout changed between generations. A front crossmember from the prior generation (DE Series) will not interchange with the 2017 DJ Series vehicle.
Platform & Vehicle Compatibility
- Chassis Platform: Mazda DJ Platform (SkyActiv-Chassis architecture).
- Model Codes: DJ3FS, DJ5FS, DJ3AS, DJ5AS, DJLFS.
- Model Range Variants: Demio 13C, 13S, XD, Touring, Touring L Package, and 15MB.
- Production Range: 2014–2019 (Japan-market Demio nameplate, later renamed globally as the MAZDA2).
- Cross-Brand Footprint: Shares basic structural architecture and mounting geometric parameters with the Toyota Yaris iA / Scion iA (North American variants co-developed on this SkyActiv platform).
Powertrain & Alignment Specifications
- Compatible Engine Applications: 1.3L Petrol (P3-VPS), 1.5L Petrol (P5-VPS), and 1.5L SkyActiv-D Clean Diesel (S5-DPTS / S5-DPTR).
- Drivetrain Constraints: Configured for Front-Wheel Drive (FF) models, with altered structural clearances on the "AS" suffix all-wheel-drive (4WD / AWD) chassis codes.
- Baseline Alignment Settings (Unladen Member Geometry):
- Camber: -0°05' (Acceptable factory tolerance: -1°05' to +0°55')
- Caster: 4°20' (Acceptable factory tolerance: 3°20' to 5°20')
- Total Toe-In: 1.0 mm to 3.0 mm
Tightening Torque Specifications
- Main Subframe-to-Chassis Structural Bolts: 115 Nm to 140 Nm {85 to 103 ft-lbs} (Two-stage torque-to-yield tracking on primary frame mounting layers).
- Steering Rack Gearbox to Subframe Connecting Bolts: 75 Nm to 104 Nm {56 to 76 ft-lbs}.
- Sway Bar Center Bracket-to-Crossmember Fasteners: 33 Nm to 42 Nm {24 to 31 ft-lbs}.
- Lower Control Arm Rear Pivot Bolt (Large Bushing): 135 Nm to 160 Nm {100 to 118 ft-lbs}.
Mazda Demio Model 2016 Crossmember Mountain
KSh4,000.00 Buy Via WhatsappComponent Overview & Construction
- Component Type: Front Suspension Axle Subframe Member / Engine Carrier Support Cradle.
- Material Composition: Stamped high-tensile structural steel.
- Component Weight: Approximately 11.0 kg to 14.6 kg (depending on specific factory underbody guarding and regional market specs).
- Mounting Design: Multi-point isolated perimeter layout containing factory press-fitted, high-density elastomer damping rubber bushings. [1, 2, 3]
Part Numbers & Identifiers
- Primary OE/OEM Reference: DA6A-34-80X (or DA6A3480X).
- Alternative / Factory Variation Numbers: DA6A-34-800, DB2R-34-80X, DB2R3480X.
- Component Interchange Warning: The crossmember layout changed between generations. A front crossmember from the prior generation (DE Series) will not interchange with the 2016 DJ Series vehicle. [1, 2, 3]
Platform & Vehicle Compatibility
- Chassis Platform: Mazda DJ Platform (SkyActiv-Chassis architecture).
- Model Codes: DJ3FS, DJ5FS, DJ3AS, DJ5AS, DJLFS.
- Model Range Variants: Demio 13C, 13S, XD, Touring, Touring L Package, and 15MB.
- Production Range: 2014–2019 (Japan-market Demio nameplate, later renamed globally as the MAZDA2).
- Cross-Brand Footprint: Shares basic structural architecture and mounting geometric parameters with the Toyota Yaris iA / Scion iA (North American variants co-developed on this SkyActiv platform). [1, 2, 3]
Powertrain & Alignment Specifications
- Compatible Engine Applications: 1.3L Petrol (P3-VPS), 1.5L Petrol (P5-VPS), and 1.5L SkyActiv-D Clean Diesel (S5-DPTS / S5-DPTR). [1]
- Drivetrain Constraints: Configured for Front-Wheel Drive (FF) models, with altered structural clearances on the "AS" suffix all-wheel-drive (4WD / AWD) chassis codes. [1]
- Baseline Alignment Settings (Unladen Member Geometry):
- Camber: -0°05' (Acceptable factory tolerance: -1°05' to +0°55')
- Caster: 4°20' (Acceptable factory tolerance: 3°20' to 5°20')
- Total Toe-In: 1.0 mm to 3.0 mm
Tightening Torque Specifications
- Main Subframe-to-Chassis Structural Bolts: 115 Nm to 140 Nm {85 to 103 ft-lbs} (Two-stage torque-to-yield tracking on primary frame mounting layers).
- Steering Rack Gearbox to Subframe Connecting Bolts: 75 Nm to 104 Nm {56 to 76 ft-lbs}.
- Sway Bar Center Bracket-to-Crossmember Fasteners: 33 Nm to 42 Nm {24 to 31 ft-lbs}.
- Lower Control Arm Rear Pivot Bolt (Large Bushing): 135 Nm to 160 Nm {100 to 118 ft-lbs}.
Mazda Demio Model 2015 Crossmember Mountain
KSh4,000.00 Buy Via WhatsappComponent Overview & Construction
-
- Component Type: Front Suspension Member Crossmember / Engine Carrier Cradle.
- Material Composition: Stamped high-tensile structural steel.
- Mounting Pattern: Multi-point perimeter bolt-on layout incorporating pre-installed, high-density rubber damping isolation bushings.
- Integrated Mounts: Features pre-formed bracket points for the steering rack gearbox, front stabilizer/sway bar, lower control arms, and the rear torque-rod engine mount. [1, 2]
Part Numbers & Identifiers
Platform & Vehicle Compatibility
-
- Chassis Generation: Mazda DJ Platform (SkyActiv-Chassis architecture).
- Model Codes: DJ3FS, DJ5FS, DJ3AS, DJ5AS, DJLFS (covering Demio 13C, 13S, XD, Touring, and 15MB variants).
- Production Range: 2014–2019 (Japan-market Demio nameplate).
- Cross-Brand Architecture: Shares geometric base configurations with the 2016+ Toyota Yaris IA / Scion iA (which were rebadged Mazda 2/Demio sedans built on this platform). [1, 2, 3]
Powertrain & Alignment Specifications
-
- Compatible Engine Layouts: 1.3L Petrol (P3-VPS), 1.5L Petrol (P5-VPS / F-VPT), and 1.5L SkyActiv-D Clean Diesel (S5-DPTS / S5-DPTR). [1, 2]
- Drivetrain Variations: Configured primarily for Front-Wheel Drive (FF) models with specific structural relief cutouts on AS-series 4WD / AWD options. [1, 2]
- Baseline Alignment Settings (Unladen Member Position):
-
- Camber: -0°05' (Acceptable tolerance: -1°05' to +0°55')
- Caster: 4°20' (Acceptable tolerance: 3°20' to 5°20')
- Total Toe-In: 1 mm to 3 mm
-
Tightening Torque Specifications
- Main Subframe-to-Chassis Structural Bolts: 115 Nm to 140 Nm (Subject to two-stage torque-to-yield specifications on specific structural frame layers).
- Steering Rack Gearbox to Subframe Connecting Bolts: 75 Nm to 104 Nm {56 to 76 ft-lbs}.
- Sway Bar Center Bracket-to-Crossmember Fasteners: 33 Nm to 42 Nm {24 to 31 ft-lbs}.
- Lower Control Arm (Rear Large Bushing) Pivot Bolt: 135 Nm to 160 Nm. [1, 2]
Nissan Dayz Gearbox Mountain
KSh3,500.00 Buy Via WhatsappComponent Overview & Construction
- Component Type: Left-Hand (LH) Transmission / Gearbox Insulator Mount.
- Material Composition: Stamped structural steel bracket combined with natural rubber vibration-damping inserts.
- Mounting Method: Multi-bolt frame attachment with a through-bolt core bushing layout to suspend the CVT/manual transmission case.
Part Numbers & Factory Designations
- Primary OE/OEM Reference (Transmission Mount): 75860-6A00C
- Alternative Manufacturer Part Identification: MN120289 (Cross-referenced due to joint development under the NMKV venture with Mitsubishi).
- Associated Left-Hand Bracket Reference: 24236-6A00B [1]
Platform & Vehicle Compatibility
- Chassis Platform/Generation:
- Model Variants: Nissan Dayz, Nissan Dayz Highway Star, and Nissan Dayz Roox (B21A). [1]
- Shared Architecture: Shared mechanical footprint and component styling with the Mitsubishi eK Wagon / eK Space (B11W series).
Powertrain Configurations
- Engine Compartment Applications: Engineered specifically for the 659cc 3-cylinder power plants: 3B20 (Naturally Aspirated) and 3B20T (Turbocharged), along with newer BR06 engine codes. [1, 2]
- Transmission Layout Support: Built for front-wheel-drive (2WD) and all-wheel-drive (4WD) layouts mated to an Xtronic Continuously Variable Transmission (CVT) or 5-speed manual transmission gearbox. [1, 2]
Tightening Torque Specifications
Nissan Note Model E12 Crossmember Mountain
KSh3,000.00 Buy Via WhatsappComponent Overview & Bushing Dimensions
- Component Type: Front Axle Subframe Crossmember / Engine Carrier Cradle.
- Material Composition: High-strength stamped structural steel.
- Bushing Dimensional Profile (OEM / Polyurethane Upgrades):
- Inner Bolt Diameter: 17.2 mm
- Outer Fitting Diameter: 39.7 mm
- Total Bushing Height: 80.3 mm
- Bushing Core Width: 35.0 mm
- Mounting Pattern: 4-point isolated high-density rubber dampening configuration.
Part Numbers & Component Identifiers
- Primary OE/OEM Reference (FWD Models): 54401-3VA0A
- Alternative / Regional Variations: 8200371332, 54401-5WH0A
- Lower Cross Rail Support (Manual Transmission): L02952
- Lower Cross Rail Support (Automatic/CVT): L02953
- Associated Left Side Bracket/Stay: 54525-3VA0A
- Associated Right Side Bracket/Stay: 54524-3VA0A [1]
Platform & Vehicle Compatibility
- Chassis Platform: Nissan V Platform (Evolutionary successor to the B platform).
- Model Range/Codes: Nissan Note 2nd Generation (E12, NE12 - 4WD) spanning production years 2012–2020.
- Shared Geometric Footprint: Shares basic subframe isolation dimensions and steering rack mounting positions with the Nissan Micra/March (K13). [1]
Powertrain & Mechanical Layout
- Compatible Engine Layouts: 1.2L 3-cylinder (HR12DE), 1.2L DIG-S (HR12DDR), 1.6L 4-cylinder (HR16DE), and 1.5L dCi Diesel.
- Drivetrain Variances: Standard front relief for FWD versions; modified rear transfer case clearances on NE12 4WD and e-POWER variants. [1]
Tightening Torque Specifications
- Main Subframe Cradle-to-Body Bolts (4 points): 127 Nm (94 ft-lbs)
- Subframe Lower Stay/Bracket Reinforcement Bolts: 97 Nm (72 ft-lbs)
- Rear Torque-Rod Engine Mount (Pins to Subframe): 95 Nm (70 ft-lbs)
- Steering Rack Gearbox to Subframe Mounting Bolts: 147 Nm (109 ft-lbs)
- Lower Control Arm Ball Joint (Pins to Steering Knuckle): 37 Nm (27 ft-lbs) [1]
Nissan AD Crossmember Mountain
KSh3,000.00 Buy Via WhatsappComponent Overview & Bushing Dimensions
- Component Type: Front Axle Subframe Member / Engine Carrier Support Cradle. [1]
- Material Composition: High-strength stamped structural steel.
- Bushing Dimensional Profile (OEM / Direct Replacement):
- Inner Bolt Diameter: 17.2 mm
- Outer Fitting Diameter: 39.7 mm
- Total Bushing Height: 80.3 mm
- Bushing Core Width: 35.0 mm
- Damping Configuration: 4-point isolated press-fit rubber bushings engineered for high-durability commercial van duty cycles. [1]
Part Numbers & Interchangability
- Primary OE/OEM Reference: 54400-EW000 [1, 2]
- Factory Substitution/Supercession Reference: 54400-1FS0A [1]
- Associated Left Support Link/Stay: 54525-EL000
- Associated Right Support Link/Stay: 54524-EL000 / NSL-NM1 [1]
- Lower Control Arm Bushing Identifiers (Pins to Crossmember):
- Large Bushing: 54570-ED500
- Small Bushing: 54560-ED530
Platform & Vehicle Compatibility
- Chassis Platform: Nissan B Platform (Commercial Wagon Layout).
- Model Range/Codes: Nissan AD / AD Expert 4th Generation (VAY12, VY12, VJY12, VZNY12) spanning production years 2006–2021.
- Shared Architecture: Swaps its mechanical footprint, structural mounting geometries, and internal bush dimensions directly with the Nissan Wingroad (Y12) and Nissan Tiida (C11). [1, 2, 3, 4, 5]
Powertrain & Mechanical Layout
- Compatible Engine Layouts: 1.2L (CR12DE), 1.5L (HR15DE), 1.6L (HR16DE), and 1.8L (MR18DE).
- Drivetrain Layouts: Optimized for Front-Wheel Drive (FF/FWD) setups (Automatic / CVT) with altered rear relief profiles on VZNY12 4WD e-4WD systems. [1, 2, 3]
Tightening Torque Specifications
- Primary Main Subframe Cradle Bolts (4 points): 127 Nm (94 ft-lbs)
- Subframe Stay Bracket Reinforcement Bolts: 97 Nm (72 ft-lbs)
- Transaxle/Engine Mount Rear Torque Bracket (Pins to Subframe): 88 to 107 Nm
- Steering Rack Gearbox to Subframe Connecting Bolts: 147 Nm (109 ft-lbs)
Nissan Wingroad Crossmember Mountain
KSh3,000.00 Buy Via WhatsappComponent Overview & Bushing Dimensions
- Component Type: Front Suspension Axle Subframe Member / Engine Carrier Cradle. [1, 2]
- Material Composition: High-strength stamped structural steel.
- Bushing Dimensional Profile (OEM / Direct Replacement):
- Inner Diameter: 17.2 mm
- Outer Fitting Diameter: 39.7 mm
- Total Bushing Height: 80.3 mm
- Bushing Core Width: 35.0 mm
- Mounting Design: 4-point isolated high-density press-fit rubber damping configuration. [1, 2]
Part Numbers & Component Identifiers
- Primary OE/OEM Reference: 54400-EW000 [1, 2]
- Associated Left Support Link/Stay: 54525-EL000
- Associated Right Support Link/Stay: 54524-EL000 [1]
- Lower Control Arm Bushing Identifiers (Connects to Crossmember):
- Large Bushing: 54570-ED500
- Small Bushing: 54560-ED530 [1]
Platform & Vehicle Compatibility
- Chassis Platform: Nissan B Platform.
- Model Range/Codes: Nissan Wingroad 3rd Generation (Y12, JY12, NY12) spanning production years 2005–2018.
- Shared Architecture: Interchanges chassis core components, internal bushing inserts, and control arm dimensions directly with the Nissan Tiida (C11) and Nissan Note (E11). [1, 2]
Powertrain & Mechanical Layout
- Compatible Engine Layouts: 1.5L Petrol (HR15DE) and 1.8L Petrol (MR18DE).
- Drivetrain Support: Configured for Front-Wheel Drive (FF/FWD) layouts with Continuously Variable Transmissions (CVT) or Automatic Transmissions (AT). [1, 2, 3]
Tightening Torque Specifications
Nissan NV200 Crossmember Mountain
KSh3,000.00 Buy Via WhatsappComponent Overview & Bushing Dimensions
- Component Type: Front Suspension Axle Subframe Crossmember / Engine Cradle. [1]
- Material Composition: High-tensile stamped structural steel. [1]
- Bushing Dimensional Profile:
- Interchanges layout configurations with the Nissan Tiida platform architecture.
- Inner Diameter: 17.2 mm
- Outer Fitting Diameter: 39.7 mm
- Total Bushing Height: 80.3 mm
- Bushing Core Width: 35.0 mm [1]
- Mounting Configuration: 4-point isolated press-fit rubber bushing mounting assembly. [1, 2]
Part Numbers & Factory Designations
- Primary OE/OEM Reference (Front): 54400-9SA0A [1]
- Superseded / Alternative Part Numbers:
- 54400-3LM0A
- 54525-JX00A (Associated Subframe Support Link/Stay - Left)
- 54524-JX00A (Associated Subframe Support Link/Stay - Right) [1]
- Rear Axle Crossmember Reference (If applicable): 43010-BJ00A [1]
Platform & Vehicle Compatibility
- Chassis Platform: Nissan B Platform (Van/Commercial Variant Layout).
- Model Range/Codes: Nissan NV200 / Evalia (M20, M20X) spanning production years 2009–2021.
- Shared Architecture: Shares internal bushing dimensions and specific steering rack mounting geometric alignments with the Nissan Tiida (C11) and Nissan Cube (Z12) global configurations. [1, 2]
Powertrain & Alignment Baseline Specifications
- Engine Compartment Compatibility: Built for 1.5L dCi Diesel (K9K), 1.6L Petrol (HR16DE), and 2.0L Petrol (MR20DE) engine layouts. [1]
- Drivetrain Support: Engineered for Front-Wheel Drive (FWD) layouts across Manual, Automatic, and CVT options.
- Factory Alignment Baseline Constraints (Unladen Crossmember Geometry):
- Camber: 0°00' (Acceptable factory tolerance: -0°45' to +0°45')
- Caster: 3°55' (Acceptable factory tolerance: 3°10' to 4°40')
- Total Toe-In: 1 mm to 2 mm
Nissan Tiida Crossmember Mountain
KSh3,000.00 Buy Via WhatsappComponent Overview & Bushing Dimensions
- Component Type: Front Axle Subframe Member / Engine Carrier Cradle. [1, 2]
- Material Composition: High-strength stamped structural steel.
- Bushing Dimensional Profile (OEM / Direct Replacement):
- Inner Diameter (A): 17.2 mm
- Outer Fitting Diameter (B): 39.7 mm
- Total Height/Length (C): 80.3 mm
- Bushing Flange/Core Width (D): 35.0 mm [1]
- Bushing Compound: Hardened high-density anti-crack rubber (OEM standard). [1]
Part Numbers & Factory Designations
- Primary OE/OEM Reference: 54401-HV70B [1]
- Alternative / Cross-Reference Part Numbers:
Platform & Vehicle Compatibility
- Chassis Platform: Nissan B Platform.
- Model Range/Codes: Tiida / Tiida Latio Hatchback and Sedan (C11, C11X, SC11, SC11X) spanning production years 2004–2014.
- Shared Architecture: Interchanges structural configuration attributes with the Nissan Cube (Z12) and Nissan Livina (L10/L11). [1, 2, 3, 4]
Powertrain & Alignment Specifications
- Compatible Engine Codes: 1.5L Petrol (HR15DE), 1.6L Petrol (HR16DE), 1.8L Petrol (MR18DE), and 1.5L dCi Diesel. [1, 2, 3]
- Drivetrain Support: Configured for Front-Wheel Drive (FWD) transmissions (Automatic, Manual, and CVT variants). [1]
- Associated Factory Wheel Alignment Constraints (Unladen Crossmember Baseline):
- Camber (Nominal): -0°10' (Acceptable factory range: -0°55' to +0°35')
- Caster (Nominal): 4°35' (Acceptable factory range: 3°50' to 5°20')
- Total Toe-In: 1 mm (Acceptable factory range: 0 mm to 2 mm) [1]









