Sort

Toyota Crown Athlete Shocks Absorbers

KSh10,000.00
Front Axle Specifications
  • Suspension Type: Independent Double Wishbone with Coil Springs [1]
  • Shock Absorber System: Twin-Tube Gas Pressure [1]
  • Adaptive Damping: Equipped with factory Adaptive Variable Suspension (AVS) utilizing a top-mounted electronic step-motor actuator to dynamically adjust valving. [1, 2]
  • Mounting Configuration: 3-bolt structural upper strut mount with a heavy-duty lower fork bush mounting directly onto the lower control arm. [1]
  • Aftermarket Cross-Reference: KYB 721001 (Right) / 721002 (Left) (Electronic/AVS series) | TEIN EnduraPro VSC76-A1MS2-R (Non-AVS bypass variant). [1, 2]
Rear Axle Specifications
  • Suspension Type: Independent Multi-Link with Coil Springs
  • Shock Absorber System: Monotube or Twin-Tube Gas Pressure (varies by Athlete trim stiffness levels)
  • Adaptive Damping: Seamless integration with the electronic AVS architecture.
  • Mounting Configuration: Eyelet top pin/stud base plate with a low-slung lower eyelet bush assembly.
  • Aftermarket Cross-Reference: KYB 551120 [1, 2, 3, 4]
Critical Installation Torque Specifications
  • Front Strut Tower Top Nut: 25 N·m (18 ft-lbf)
  • Front Strut Lower Fork Bolt: 157 N·m (116 ft-lbf)
  • Rear Shock Upper Mount Base Bolts: 30 N·m (22 ft-lbf)
  • Rear Shock Lower Eyelet Bush Bolt: 84 N·m (62 ft-lbf)
OEM Part Numbers & Platform Sharing
  • GRS184 (Zero Crown Athlete) Front OEM Numbers: 48510-80255, 48520-80125
  • GRS204 (200-Series Athlete) Front OEM Numbers: 48510-80477, 48520-80277
  • GRS214 (210-Series Athlete) Front OEM Numbers: 48510-80610 (Right), 48520-80324 (Left)
  • Platform Sharing Architecture: Shares identical dampener chassis mount geometry and electronic valving dynamics with the Toyota Mark X (GRX120 / GRX130) and Lexus GS (GRS190 / GRL10) 2WD performance platforms.

Toyota Mark X GRX 120 Shocks Absorbers

KSh10,000.00
Front Axle Specifications
  • Suspension Type: Double Wishbone
  • Shock Absorber System: Twin-Tube Gas Pressure
  • Operating Principle: Hydraulic Double-Acting
  • Mounting Type: Upper structural Strut Mount (3-bolt top plate) with a lower Fork/Eyelet bush mount securing to the lower control arm.
  • Electronic Variable Dampening: Models equipped with AVS (Adaptive Variable Suspension) utilize an electronic actuator port on top of the front piston rod.
  • Aftermarket Cross-Reference (KYB Excel-G): 341357 (Right) / 341358 (Left)
Rear Axle Specifications
  • Suspension Type: Multi-Link Independent
  • Shock Absorber System: Mono-Tube or Twin-Tube Gas Pressure (depending on sport/standard trim levels)
  • Operating Principle: Hydraulic Double-Acting
  • Mounting Type: Top Pin/Stud mount with a lower Eyelet bush mount.
  • Aftermarket Cross-Reference (KYB Excel-G): 341423
Critical Installation Torque Specifications
  • Front Strut Tower Top Nut: 25 N·m (18 ft-lbf)
  • Front Strut Base Fork to Control Arm Bolt: 157 N·m (116 ft-lbf)
  • Rear Shock Upper Mount Base Bolts: 30 N·m (22 ft-lbf)
  • Rear Shock Lower Eyelet Bush Bolt: 84 N·m (62 ft-lbf)
OEM Part Numbers & Platform Sharing
  • Standard Front Left/Right OEM Numbers: 48510-80227, 48520-80047, 48510-30740
  • AVS (Electronic) Front Left/Right OEM Numbers: 48510-80255, 48520-80125
  • Standard Rear OEM Numbers: 48530-80287, 48530-30510
  • AVS (Electronic) Rear OEM Numbers: 48530-80327
  • Platform Architecture: Shares identical dampener chassis mount geometry with the Toyota Crown (GRS180 / GRS182 / GRS200 series) and the Lexus GS (GRS190 series) 2WD platforms.

Toyota Passo Sette Shock Absorber

KSh7,500.00
Front Axle Specifications
  • Suspension Type: MacPherson Strut
  • Shock Absorber System: Twin-Tube Gas Pressure
  • Operating Principle: Hydraulic Double-Acting
  • Mounting Type: Top Pin/Stud (Strut Mount) with Bottom Bracket clamp (Two-Bolt Steering Knuckle mount)
  • Aftermarket Cross-Reference (KYB): 3340117 / 3340116 (Varies by Left/Right side orientation) [1]
Rear Axle Specifications
  • Suspension Type: Torsion Beam (Trailing Arm layout)
  • Shock Absorber System: Separate Spring and Damper configuration
  • Operating Principle: Twin-Tube Gas Pressure
  • Mounting Type: Top Pin/Eyelet and Bottom Eyelet bush [1]
OEM Part Numbers & Compatibility
  • Front Right OEM Part Number: 48510-B1130, 48510-B1140
  • Front Left OEM Part Number: 48520-B1130, 48520-B1140
  • Rear OEM Part Number: 48531-B1090
  • Platform Sharing: Component configuration shares architectural commonality with the Daihatsu Boon Luminas, Toyota Avanza, and Perodua Alza platforms. [1, 2]

Honda Odyssey Rear Shocks Absorbers

KSh8,500.00
Shock Absorber Architecture & Design
  • Suspension Type: Independent multi-link rear suspension or trailing-arm setup (depending on generation).
  • Dampening System: Low-pressure, nitrogen gas-charged twin-tube or mono-tube hydraulic shock absorber.
  • Mounting Configuration:
    • Top Mount: Two-bolt top mounting flange bracket or traditional stem/pin setup passing through the rear chassis tower body.
    • Bottom Mount: Clevis/fork bracket or heavy-duty eyelet sleeve mounted directly to the lower control arm or rear knuckle trailing bracket.
  • Aspiration/Adjustability: Deployed as passive variable dampening units (amplitude reactive dampers) or multi-valve configurations.
Dimensional Specifications (Standard J-Series V6 Generations - RL5/RL6)
  • Extended Length (Mount Center to Center): 520 mm to 545 mm (varying slightly by model year trim levels).
  • Collapsed Length: 345 mm to 365 mm.
  • Total Piston Stroke: 175 mm to 180 mm.
  • Piston Rod Diameter: 14.0 mm to 16.0 mm (high-strength induction hardened steel).
  • Outer Shell Tube Diameter: 45.0 mm to 51.0 mm.
  • Lower Mount Inner Bushing Diameter: 12.2 mm / 14.1 mm (designed for M12/M14 heavy-load shoulder bolts).
Fastener & Torque Specifications
  • Upper Shock Absorber Flange Mounting Bolts (To Body): 59 Nm (approx. 44 ft-lbs).
  • Upper Shock Pin/Stem Locknut (Where Applicable): 29 Nm (approx. 22 ft-lbs).
  • Lower Shock Absorber Mounting Bolt (To Lower Arm): 88 Nm to 98 Nm (approx. 65–72 ft-lbs) — Must be fully tightened only when the vehicle suspension is under full normal load (resting on the ground).
  • Rear Wheel Lug Nuts (Road Wheel to Hub): 108 Nm (approx. 80 ft-lbs).
Component Mass
  • Average Unit Mass (Dry): ~2.4 kg to 2.9 kg per shock absorber unit.

Toyota Passo Rear Shocks Absorbers

KSh2,500.00
Shock Absorber Architecture & Design
  • Suspension Type: Trailing-arm type torsion beam rear suspension.
  • Dampening System: Hydraulic twin-tube, low-pressure gas-charged shock absorber.
  • Mounting Configuration:
    • Top Mount: Pin/stem-type top rod configuration (secured through the inner vehicle wheel-well arch via rubber isolating bushings, steel washers, and a locknut).
    • Bottom Mount: Eyelet sleeve configuration (secured via a horizontal bolt passing through the lower trailing arm bracket).
  • Operation Principle: Double-acting (dampens both compression/jounce and extension/rebound cycles).
Dimensional Specifications (Standard 2WD Variants)
  • Extended Length (Eye-to-Pin Center): 465 mm to 480 mm (depending on specific model year / aftermarket OEM cross-references).
  • Collapsed Length: 305 mm to 315 mm.
  • Total Piston Stroke: 160 mm to 165 mm.
  • Piston Rod Diameter: 12.0 mm.
  • Outer Shell Tube Diameter: 38.0 mm to 42.0 mm.
  • Lower Eyelet Bushing Inner Diameter: 12.1 mm (fits standard M12 shoulder bolt).
Fastener & Torque Specifications
  • Upper Stem/Pin Locknut: 25 Nm (approx. 18 ft-lbs) — Note: Do not over-tighten, as over-compressing the upper rubber isolation bushings leads to premature bushing failure.
  • Lower Eyelet Mounting Bolt (To Trailing Arm): 80 Nm (approx. 59 ft-lbs) — Crucial: This lower bolt must be given its final torque sequence only while the vehicle is resting at its standard static ride height on the ground to prevent bushing twist.
  • Rear Wheel Lug Nuts (Road Wheel to Hub): 103 Nm (approx. 76 ft-lbs).
Cross-Chassis Assembly Weights
  • Average Unit Mass (Dry): ~1.65 kg to 1.85 kg per shock absorber side.

Suzuki Swift Model 2018 Shock Absorber

KSh10,000.00
Component & Sizing Specifications
The factory front lower control arms use a integrated layout where the ball joint is pressed directly into the arm assembly.
  • Material Construction: Heavy-gauge stamped sheet steel.
  • Dimensions & Physical Profiles:
    • Inner Flange Length: ~336 mm
    • Outer Pivot Length: ~374 mm
    • Ball Joint Stud Joint Diameter: 20 mm
    • Small Front Bushing Hole: 16.2 mm diameter (Outer diameter: 53 mm)
    • Large Rear Bushing Hole: 23.3 mm diameter (Outer diameter: 82 mm)
  • Bushing Layout: Features a small front horizontal bushing and a large, vertically oriented rear cylindrical rubber dampening bushing designed to isolate high-amplitude road shocks and harshness.
Genuine Mazda OEM Part Numbers
Part numbers vary slightly depending on the build origin (Japan vs. Mexico plants) and drivetrain (FWD vs. AWD). The base numbers for the complete front arm assemblies include the ball joint and pre-installed bushings.
  • Front Right (RH) Lower Control Arm Assy: KD35-34-300P / KD35-34-300T (Supersedes previous revisions ending in D, E, F, G, H, J, L, R, S).
  • Front Left (LH) Lower Control Arm Assy: KD35-34-350T / KA0G-34-350.
  • Front Small Bushing Only: TK48-34-470A.
  • Front Mounting Pivot Bolt: 9YA0-21-603C.
Factory Torque Specifications
Important: To protect the inner rubber elements from tearing prematurely, you must pre-load the suspension using a jack to mimic the vehicle resting at normal ride height on its wheels before applying the final torque to the subframe pivot bolts.
Fastener Connection Location Metric Spec (N·m) Imperial Spec (ft-lbs)
Front Pivot Horizontal Bolt (to Subframe) 244 N·m 180 ft-lbf
Rear Bushing Vertical Mount Bolts (2 per arm) 149 N·m 110 ft-lbf
Ball Joint Stud Pinch Nut/Bolt (to Steering Knuckle) 40 N·m 30 ft-lbf

Toyota Vanguard Front Shock Absorber

KSh3,000.00
Geometrical & Architecture Specifications
  • Suspension System: MacPherson Strut Assembly with integrated spring seat tower.
  • Internal Valve Construction: Twin-tube low-pressure design optimized for SUV ride stability and cabin comfort.
  • Fitting Position: Front Axle (Asymmetric Left-Hand and Right-Hand specific units; not interchangeable).
  • Chassis Compatibility: Interchangeable across ACA33W, ACA38W, GSA33W configurations (240S, 350S, 2WD, and 4WD variants).
  • Knuckle Attachment Mount: Heavy-duty double-bolt steering knuckle mounting bracket welded to the lower strut casing.
  • Sway Bar Link: Integrated stabilizer bracket on the outer shell body for direct stabilizer link attachment. [1, 2, 3, 4, 5]
Genuine OEM & Aftermarket Cross-Reference Part Numbers
  • Right Hand (RH - Front Strut Assembly):
    • Toyota Genuine OEM: 48510-80366, 48510-42190
    • Aftermarket Identifiers: KYB Excel-G Series Part Number 339031 [1, 2, 3]
  • Left Hand (LH - Front Strut Assembly):
    • Toyota Genuine OEM: 48520-80130, 48520-42190
    • Aftermarket Identifiers: KYB Excel-G Series Part Number 339032 [1, 2, 3]
Core Material & Structural Specs
  • Piston Rod Build: Heavy-duty, high-tensile carbon steel finished with an anti-wear micro-smooth hard chrome plating layer to extend oil seal lifespan.
  • Dampening Element: Multi-stage, velocity-sensitive internal valving matrix that scales hydraulic resistance automatically relative to piston stroke speed.
  • Gas Media: Low-pressure Nitrogen gas (N₂) injection to continuously suppress hydraulic oil foaming, aeration, and thermal fade under continuous heavy load cycles.
  • Fluid Seal: High-integrity multi-lip synthetic rubber seal complete with an integrated external dirt/abrasive scraper ring.

Toyota Rav4 Shock Absorber

KSh3,000.00
1. Toyota RAV4 5th Generation (XA50 Series: 2019–Present)
Engineered for the TNGA-K (Toyota New Global Architecture) platform to deliver a lower center of gravity and sharper handling.
Front Strut Specifications
  • System Type: Gas-Pressurized MacPherson Strut Assembly
  • Internal Design: Twin-tube with high-speed sensitive valving
  • Fitting Position: Front Axle (Asymmetric Left and Right specific units)
  • Chassis Series: MXAA52, MXAA54, AXAH52, AXAH54 (2WD / AWD / Hybrid)
  • Genuine OEM Part Numbers:
    • Right Hand (RH): 48510-80927, 48510-42350, 48510-42370
    • Left Hand (LH): 48520-80645, 48520-42350, 48520-42370
  • Aftermarket Equivalents: KYB Excel-G Series (3340206 for RH / 3340207 for LH)
Rear Shock Specifications
  • System Type: Gas-Charged Telescopic Hydraulic Damper
  • Suspension Layout: Multi-link trailing arm rear suspension setup
  • Fitting Position: Rear Axle (Symmetric / interchangeable Left and Right)
  • Genuine OEM Part Numbers: 48530-42170, 48530-80784, 48530-42210
  • Aftermarket Equivalents: KYB Excel-G Series (3440058)

2. Toyota RAV4 4th Generation (XA40 Series: 2013–2018)
Built for standard highway comfort and light off-road stability on the traditional RAV4 platform.
Front Strut Specifications
  • System Type: Oil/Gas-Pressurized MacPherson Strut Assembly
  • Internal Design: Twin-tube low-pressure design
  • Fitting Position: Front Axle (Asymmetric Left and Right specific units)
  • Chassis Series: ZASA42, ZASA44, ASA42, ASA44, AVA42, AVA44
  • Genuine OEM Part Numbers:
    • Right Hand (RH): 48510-42230, 48510-80648, 48510-42260
    • Left Hand (LH): 48520-42230, 48520-80388, 48520-42260
  • Aftermarket Equivalents: KYB Excel-G Series (339275 for RH / 339276 for LH)
Rear Shock Specifications
  • System Type: Gas Pressure Double-Acting Hydraulic Damper
  • Fitting Position: Rear Axle (Symmetric / interchangeable Left and Right)
  • Mounting Configuration: Top eyelet pin bush with reinforced lower rubber bushing ring
  • Genuine OEM Part Numbers: 48530-42110, 48530-42130, 48530-80689
  • Aftermarket Equivalents: KYB Excel-G Series (349140)

Core Structural & Material Specifications (All Generations)
  • Piston Rod Build: Micro-grooved, induction-hardened carbon steel with hard-chrome mirror finishing to drop seal friction limits.
  • Working Gas Media: Low-pressure Nitrogen gas (N₂) injection to permanently suppress hydraulic fluid cavitation, foaming, and performance fading under heat cycles.
  • Seal System: Multi-lip synthetic rubber oil pressure seal combined with an external abrasive dirt-scraper ring.
  • Valving Matrix: Multi-stage, velocity-sensitive rebound and compression discs that adjust hydraulic flow dynamically relative to piston stroke speed.

Toyota Passo Model 2018 Shock Absorber

KSh6,000.00
Front Shock Absorber (Strut) Specifications
    • System Type: Gas/Oil-Pressurized MacPherson Strut Assembly
    • Damping Design: Twin-tube internal hydraulic architecture
    • Fitting Position: Front Axle (Asymmetric left and right specific layout)
    • Chassis Series: M700A (2WD / Front-Wheel Drive), M710A (4WD variant)
    • Aftermarket Cross-Reference: KYB Excel-G Series (Part Number: 332120) [1, 2, 3, 4, 5]
Rear Shock Absorber Specifications
    • System Type: Gas-Charged Telescopic Hydraulic Damper [1]
    • Damping Design: Twin-tube double-acting pressure system
    • Fitting Position: Rear Axle (Symmetric / interchangeable left and right)
    • Mounting Configuration: Top stem pin/eyelet joint with a reinforced lower rubber eyelet bushing [1, 2]
    • Genuine OEM Part Numbers:
        • 2WD Models: 48530B9275 (Marked: 48531-B1250)
        • 4WD Models: 48530B9160 [1, 2]
    • Aftermarket Cross-Reference: KYB Gas Damper Series (Part Number: 343406) [1]
Material & Structural Specs
  • Piston Rod Construction: High-tensile, induction-hardened steel finished with an anti-friction, micro-smooth hard chrome plating. [1]
  • Gas Element: Low-pressure Nitrogen gas (N₂) injection to actively suppress hydraulic oil aeration, cavitation, and heat-induced damping fade.
  • Oil Seal Design: High-integrity multi-lip synthetic rubber seal integrated with a secondary external dirt-wiper ring. [1]
  • Valving Mechanism: Velocity-sensitive, multi-stage rebound disc matrix that scales damping resistance relative to road-induced piston velocity.

Toyota Noah Model 2017 Shock Absorber

KSh3,000.00
Front Shock Absorber (Strut) Specifications
  • System Type: Gas/Oil-Pressurized MacPherson Strut Assembly
  • Chassis Series: ZRR80G, ZRR80W, ZWR80G, ZWR80W, ZRR85 (2WD / 4WD configurations)
  • Damping Technology: Velocity-sensitive multi-stage valving, twin-tube internal architecture
  • Fitting Position: Front Axle (Asymmetric left and right specific orientation)
  • Genuine OEM Part Numbers:
    • Right Hand (RH): 48510-80799, 48510-80826, 48510-80655
    • Left Hand (LH): 48520-80475, 48520-80500, 48520-80356
  • Aftermarket Cross-Reference: KYB Excel-G Series (Part Numbers: 335068 (RH) / 335069 (LH))
Rear Shock Absorber Specifications
  • System Type: Gas-Charged, Twin-Tube Hydraulic Shock Damper
  • Damping Design: Double-acting telescopic hydraulic pressure
  • Fitting Position: Rear Axle (Symmetric / interchangeable left and right)
  • Mounting Configuration: Top eyelet/pin bush assembly with a reinforced lower rubber eyelet bushing
  • Genuine OEM Part Numbers: 48531-80784, 48531-80785, 48530-80426, 48540-80003
  • Aftermarket Cross-Reference: KYB Excel-G 3440109
Material & Internal Core Specifications
  • Piston Micro-Structure: Hardened carbon-steel rod with micro-grooved, mirror-smooth hard chrome coating to minimize seal friction.
  • Gas Media: Low-pressure Nitrogen gas (N₂) injection to minimize hydraulic fluid foaming, aeration, and thermal fading under load.
  • Fluid Seals: Multi-lip synthetic rubber sealing ring paired with an external dust/debris scraper ring.
  • Valving Control: Linear spring-loaded rebound disc system that self-adjusts based on piston movement frequency.

Toyota Voxy Model 2018 Shock Absorber

KSh3,000.00
Front Shock Absorber (Strut) Specifications
  • System Type: Gas/Oil-Pressurized MacPherson Strut Assembly
  • Damping Design: Twin-tube internal hydraulic architecture
  • Fitting Position: Front Axle (Left and Right specific asymmetric orientation)
  • Chassis Application: ZRR80G, ZRR80W, ZWR80G, ZWR80W, ZRR85G, ZRR85W (2WD & 4WD variants)
  • Genuine OEM Part Numbers:
    • Right Hand (RH): 48510-80826, 48510-80799, 48510-80655
    • Left Hand (LH): 48520-80500, 48520-80475, 48520-80356
  • Aftermarket Equivalents: KYB Excel-G Series (Part Numbers: 335068 for RH / 335069 for LH)
Rear Shock Absorber Specifications
  • System Type: Gas-Charged Telescopic Hydraulic Damper
  • Damping Design: Twin-Tube double-acting pressure system
  • Fitting Position: Rear Axle (Symmetric / interchangeable between left and right)
  • Mounting Structure: Top stem pin/eyelet joint with a reinforced bottom rubber eyelet bushing
  • Genuine OEM Part Numbers: 48531-80784, 48531-80785, 48530-80426, 48540-80003
  • Aftermarket Equivalents: KYB Excel-G Series (Part Number: 3440109)
Material & Structural Specifications
  • Piston Rod Construction: High-tensile, induction-hardened carbon steel finished with an anti-friction, hard-chrome plating.
  • Gas Element: Low-pressure Nitrogen gas (N₂) injection to actively suppress oil aeration, cavitation, and heat-induced damping fade.
  • Oil Seal Design: High-integrity multi-lip synthetic rubber seal integrated with a secondary external dirt-wiper ring.
  • Valving Mechanism: Velocity-sensitive, multi-stage rebound disc matrix that scales damping resistance relative to road-induced piston velocity.

Toyota Noah Model 2017 Shock Absorber

KSh3,000.00
Front Shock Absorber (Strut) Specifications
  • System Type: Gas/Oil-Pressurized MacPherson Strut Assembly [1]
  • Chassis Series: ZRR80G, ZRR80W, ZWR80G, ZWR80W, ZRR85 (2WD / 4WD configurations) [1]
  • Damping Technology: Velocity-sensitive multi-stage valving, twin-tube internal architecture
  • Fitting Position: Front Axle (Asymmetric left and right specific orientation) [1]
  • Genuine OEM Part Numbers:
    • Right Hand (RH): 48510-80799, 48510-80826, 48510-80655
    • Left Hand (LH): 48520-80475, 48520-80500, 48520-80356 [1]
  • Aftermarket Cross-Reference: KYB Excel-G Series (Part Numbers: 335068 (RH) / 335069 (LH)) [1]
Rear Shock Absorber Specifications
  • System Type: Gas-Charged, Twin-Tube Hydraulic Shock Damper
  • Damping Design: Double-acting telescopic hydraulic pressure
  • Fitting Position: Rear Axle (Symmetric / interchangeable left and right)
  • Mounting Configuration: Top eyelet/pin bush assembly with a reinforced lower rubber eyelet bushing
  • Genuine OEM Part Numbers: 48531-80784, 48531-80785, 48530-80426, 48540-80003
  • Aftermarket Cross-Reference: KYB Excel-G 3440109 [1, 2, 3]
Material & Internal Core Specifications
  • Piston Micro-Structure: Hardened carbon-steel rod with micro-grooved, mirror-smooth hard chrome coating to minimize seal friction.
  • Gas Media: Low-pressure Nitrogen gas (N₂) injection to minimize hydraulic fluid foaming, aeration, and thermal fading under load.
  • Fluid Seals: Multi-lip synthetic rubber sealing ring paired with an external dust/debris scraper ring.
  • Valving Control: Linear spring-loaded rebound disc system that self-adjusts based on piston movement frequency.

Toyota Voxy Model 2017 Shock Absorber

KSh3,500.00
Front Shock Absorber (Strut) Specifications
  • System Architecture: Oil/Gas-Pressurized MacPherson Strut Assembly
  • Fitting Position: Front Axle (Left / Right specific orientation)
  • Damping Mechanism: Twin-tube internal construction [1, 2]
  • Chassis Compatibility: ZRR80G, ZRR80W, ZWR80G, ZWR80W, ZRR85G (2WD & 4WD variants) [1]
  • Genuine OEM Part Numbers:
    • Right Side (RH): 48510-80826 (Marked: 48510-28540), 48510-80655, 48510-80799
    • Left Side (LH): 48520-80500 (Marked: 48520-28540), 48520-80356, 48520-80475 [1, 2]
  • Aftermarket Replacement: KYB Excel-G Series (Part Numbers: 335068 / 335069) [1, 2]
Rear Shock Absorber Specifications
  • System Architecture: Gas Pressure, Self-contained Damper
  • Damping Design: Twin-Tube
  • Fitting Position: Rear Axle (Left / Right interchangeable)
  • Mounting Assembly: Upper pin/eyelet joint and lower eyelet bushing
  • Genuine OEM Part Numbers: 48531-80784, 48530-80426, 48540-80003
  • Aftermarket Replacement: KYB Excel-G 3440109 [1, 2]
Internal Core & Material Specifications
  • Piston Rod: Induction-hardened carbon steel rod finished with low-friction hard chrome plating to minimize seal abrasion.
  • Gas Element: Charged with low-pressure Nitrogen (N₂) Gas to prevent hydraulic fluid aeration and foaming under continuous heat cycles.
  • Valving Matrix: Multi-stage, velocity-sensitive automatic rebound disc valves that dynamically adapt damping force to varying road conditions.
  • Seal Interface: Multi-lip synthetic rubber oil seal paired with an integrated dirt wiper to isolate internal fluid.

Toyota Voxy Model 2015 Shock Absorber

KSh3,000.00
Rear Shock Absorber Specifications
    • System/Design Type: Gas Pressure, Twin-Tube
    • Product Line / Category: OE Replacement (e.g., KYB Excel-G 3440109)
    • Fitting Position: Rear Axle (Left / Right)
    • Factory Lifespan: Approximately 80,000 to 100,000 km
    • Standard Mounting Type: Eye-to-pin or eye-to-eye bushing assembly
    • Genuine OEM Part Numbers: 48531-80784, 48530-80426, 48540-80003 [1, 2, 3, 4, 5]
Front Shock Absorber (Strut) Specifications
    • System/Design Type: Oil or Gas-Charged Strut Assembly
    • Fitting Position: Front Axle (Left / Right specific orientation)
    • Chassis Compatibility: ZRR80G, ZRR80W, ZWR80G, ZRR85G (2WD / 4WD variants)
    • Genuine OEM Part Numbers: 48510-80675 (Right), 48520-80477 (Left), 48510-80802
    • Aftermarket Replacement Parts: KYB 335068 / 335069 [1, 2, 3, 4, 5, 6, 7, 8]
Material & Build Specifications
  • Piston Rod: Heavy-duty, large diameter, induction-hardened, and hard-chrome plated for corrosion resistance.
  • Oil Seal: Multi-lip synthetic rubber seal designed with a contaminant wiper to keep hydraulic fluid locked inside.
  • Rod Guide: Sintered iron guide complete with a PTFE-bushed sliding surface for low friction and minimal rod wear.
  • Gas Charge: Low-pressure Nitrogen gas to reduce fluid aeration and foaming.

Toyota Voxy Model 2014 Shock Absorber

KSh3,000.00
Core Architectural Specifications (Front Struts)
    • Suspension System Layout: Independent MacPherson Strut.
    • Internal Shock Mechanics: Gas-Charged Twin-Tube low-pressure nitrogen gas technology (engineered to eliminate hydraulic fluid aeration and cavitation).
    • Strut Assembly Design: Structural, load-bearing suspension strut carrying the lower integrated spring seat plate and stabilizer link mounting tab.
    • Mounting Configuration: Symmetrical Top Pin / Stud upper chassis link fastened via a 3-bolt suspension tower support geometry, paired with a heavy-duty Saddle Bracket / Bottom Plate dual-bolt steering knuckle housing clamp layout.
    • Orientation: Asymmetrical, side-specific Left Hand (LH) and Right Hand (RH) directional assemblies.
Core Architectural Specifications (Rear Shocks)
    • Suspension System Layout: Semi-independent Torsion Beam / Axle Beam suspension system.
    • Damper Assembly Design: Standalone, non-load-bearing Telescopic Shock Absorber (operates entirely separated from the rear coil spring seats).
    • Internal Shock Mechanics: Gas-pressure twin-tube setup.
    • Mounting Configuration: Threaded Top Pin bushing stem adapter paired with a Bottom Eyelet sleeve cross-bolt mounting layout on the rear axle trailing arms.
    • Orientation: Symmetrical layout featuring identical, interchangeable units for both the left and right rear wheel hubs.
Chassis Platform Application
    • Chassis Platform Generation: Third-Generation Toyota Voxy (ZRR80 / ZRR85 / ZWR80 series, 2014 introduction year).
    • Drive Form Profiles: Internal valving dimensions and dampening stroke tolerances split strictly between standard Front-Wheel Drive (2WD / ZRR80) gasoline models, Hybrid models (2WD / ZWR80), and heavy-duty, higher-load All-Wheel Drive (4WD / ZRR85) variations.
Factory OEM & Aftermarket Cross-Reference Numbers
    • Toyota Factory Genuine OEM Base Roots:
        • Front Right Hand (RH): 48510-80800, 48510-28410, 48510-80674
        • Front Left Hand (LH): 48520-80436, 48520-28410, 48520-80327
        • Rear Axle Assemblies: 48530-80662, 48530-28630, 48530-D1010
    • KYB (Excel-G OE Replacement Series) Production Catalog Codes:
        • Front Right Hand (RH): 3340156
        • Front Left Hand (LH): 3340157
        • Rear Axle (Both Sides): 3440109
Structural Fastener Installation Torques
    • Strut-to-Steering Knuckle Clamp Bolts (Bottom dual-bolts): 164 Nm (121 ft-lbs).
    • Upper Chassis Tower Flange Mounting Nuts (3-bolt layout): 39 Nm (29 ft-lbs).
    • Center Strut Piston Rod Retaining Nut: 56 Nm (41 ft-lbs).
    • Front Sway Bar Stabilizer Link End Nuts: 74 Nm (55 ft-lbs).

Toyota Voxy Model 2010 Shock Absorber

KSh3,000.00
Core Architectural Specifications (Front Struts)
    • Suspension System Layout: Independent MacPherson Strut.
    • Internal Shock Mechanics: Gas-Charged Twin-Tube low-pressure nitrogen gas technology (calibrated to minimize hydraulic fluid aeration, foaming, and damping fade).
    • Strut Assembly Design: Structural, load-bearing suspension strut carrying the lower integrated spring seat plate.
    • Mounting Configuration: Symmetrical Top Pin / Stud upper chassis link fastened via a 3-bolt suspension tower support geometry, paired with a heavy-duty Saddle Bracket / Bottom Plate dual-bolt steering knuckle housing clamp layout.
    • Orientation: Asymmetrical, side-specific Left Hand (LH) and Right Hand (RH) directional assemblies.
Core Architectural Specifications (Rear Shocks)
    • Suspension System Layout: Semi-independent Torsion Beam / Axle Beam suspension system.
    • Damper Assembly Design: Standalone, non-load-bearing Telescopic Shock Absorber (operates entirely separated from the rear coil spring seats).
    • Internal Shock Mechanics: Gas-pressure twin-tube setup.
    • Mounting Configuration: Threaded Top Pin bushing stem adapter paired with a Bottom Eyelet sleeve cross-bolt mounting layout on the rear axle trailing arms.
    • Orientation: Symmetrical layout featuring identical, interchangeable units for both the left and right rear wheel hubs.
Chassis Platform Application
    • Chassis Platform Generation: Facelift Second-Generation Toyota Voxy (ZRR70 / ZRR75 series, 2010 production year).
    • Drive Form Profiles: Internal valving dimensions and dampening stroke tolerances split strictly between standard Front-Wheel Drive (2WD / ZRR70) chassis lines and heavy-duty, higher-load All-Wheel Drive (4WD / ZRR75) variations.
Factory OEM & Aftermarket Cross-Reference Numbers
    • Toyota Factory Genuine OEM Base Roots:
        • Front Right Hand (RH): 48510-80368, 48510-28320, 48510-80543
        • Front Left Hand (LH): 48520-80131, 48520-28320, 48520-80251
        • Rear Axle Assemblies: 48530-80547, 48540-29365
    • KYB (Excel-G OE Replacement Series) Production Catalog Codes:
        • Front Right Hand (RH): 335068 (Alternative: 339102)
        • Front Left Hand (LH): 335069 (Alternative: 339103)
        • Rear Axle (Both Sides): 344362
Structural Fastener Installation Torques
  • Strut-to-Steering Knuckle Clamp Bolts (Bottom dual-bolts): 164 Nm (121 ft-lbs).
  • Upper Chassis Tower Flange Mounting Nuts (3-bolt layout): 39 Nm (29 ft-lbs).
  • Center Strut Piston Rod Retaining Nut: 56 Nm (41 ft-lbs).
  • Front Sway Bar Stabilizer Link End Nuts: 74 Nm (55 ft-lbs).

Toyota Passo 2018 Shock Absorber

KSh5,000.00
Core Architectural Specifications (Front Struts)
  • Suspension System Layout: Independent MacPherson Strut.
  • Internal Shock Mechanics: Gas-Charged Twin-Tube design utilizing low-pressure nitrogen gas to prevent hydraulic fluid cavitation and foaming.
  • Strut Assembly Design: Load-bearing structural suspension strut.
  • Chassis Platform Application: Third-Generation Toyota Passo (M700A / M710A series).
  • Axle Position: Front Axle (Side-specific asymmetrical Left Hand/Right Hand configuration).
  • Mounting Pattern: Dual-bolt steering knuckle bottom clamp paired with a threaded top pin chassis tower anchoring profile.
Core Architectural Specifications (Rear Shocks)
  • Suspension System Layout: Torsion Beam semi-independent rear suspension axle.
  • Damper Assembly Design: Standalone, non-load-bearing Telescopic Shock Absorber (operates entirely separated from the rear coil spring seats).
  • Internal Shock Mechanics: Low-pressure gas-charged twin-tube setup.
  • Mounting Configuration: Top pin threaded rod mount paired with a bottom eyelet sleeve cross-bolt bushing layout.
  • Axle Position: Rear Axle (Symmetrical, interchangeable units for both left and right rear wheel locations).
Drive Train & Chassis Tuning Variations
  • 2WD (M700A Chassis) vs. 4WD (M710A Chassis): Rear shock internal valving rates and stroke length profiles are modified distinctly to accommodate the independent differential and extra axle weight distribution on full-time All-Wheel Drive variants.
  • Material Composition: Induction-hardened structural steel piston rods enclosed by high-performance multi-lip Nitrile rubber (NBR) fluid seals to resist fine dust ingress.
Factory OEM & Aftermarket Cross-Reference Numbers
  • Toyota / Daihatsu Factory Genuine OEM Base Roots:
    • Front Right Hand (RH): 48510-B1230
    • Front Left Hand (LH): 48520-B1050, 48520-B9275
    • Rear Axle Assemblies: 48530-B1040, 48531-B1040 [1, 2]
  • KYB (Excel-G OE Replacement Series) Production Catalog Codes:
    • Front Struts (Symmetric Aftermarket Match): 332120
    • Rear Dampers: 343447 (or 343406 depending on baseline sub-trim parameters). [1, 2, 3]

Nissan FB15 Shocks Absorbers Ex-Japan

KSh2,500.00
Core Architectural Specifications (Front Struts)
    • Suspension Layout: Independent MacPherson Strut.
    • Internal Shock Mechanics: Gas-Charged Twin-Tube low-pressure nitrogen configuration (engineered to eliminate hydraulic fluid aeration on rough road surfaces).
    • Strut Assembly Design: Load-bearing structural suspension strut.
    • Mounting Configuration: 3-bolt upper triangular tower mounting pattern paired with a bottom dual-bolt steering knuckle mounting bracket.
    • Orientation: Asymmetrical, side-specific Left Hand (LH) and Right Hand (RH) directional assemblies.
Core Architectural Specifications (Rear Shocks)
    • Suspension Layout Compatibility: Multi-Link Beam Axle or rigid trailing link rear suspension setup (depending on standard 2WD or 4WD chassis configurations).
    • Shock Assembly Design: Standalone, non-load-bearing Telescopic Shock Absorber (damper operates completely separate from the coil spring seat).
    • Mounting Configuration: Top Pin threaded rod connection paired with a Bottom Eyelet sleeve through-bolt bushing.
    • Orientation: Symmetrical layout (identical interchangeable units for both Left and Right rear positions).
Chassis & Drive Train Variations (Nissan Sunny FB15 Platform)
    • 2WD (Front-Wheel Drive) vs. 4WD (FNB15 Chassis): Rear shock dampening rates and internal oil-valving dimensions are split strictly between standard Front-Wheel Drive models and the heavier-duty, higher-load All-Wheel Drive (FNB15 / i-Four) platforms.
    • Material Composition: Induction-hardened carbon steel piston rods paired with premium multi-lip Nitrile rubber (NBR) oil seals to survive demanding dust conditions.
Factory OEM & Aftermarket Cross-Reference Numbers
    • Nissan Genuine Factory JDM OEM Roots:
        • Front Right Hand (RH): 54302-4M403, 54302-4M425, 54302-WD025
        • Front Left Hand (LH): 54303-4M403, 54303-4M425, 54303-WD025
        • Rear Axle Dampers: 56210-4M400, 56210-4M425, 56210-4M725
    • KYB (Excel-G OE Replacement Series) Part Numbers:
        • Front Right Hand (RH): 333310
        • Front Left Hand (LH): 333311
        • Rear Axle (Both Sides): 341279

Volkswagen Golf Shocks Absorbers Ex German

KSh4,500.00
Core Architectural Specifications (Front Struts)
  • Suspension Layout: Independent MacPherson Strut.
  • Internal Shock Mechanics: Gas-Pressure Twin-Tube system (low-pressure nitrogen gas charged to eliminate hydraulic fluid aeration and foaming). [1, 2]
  • Strut Assembly Design: Load-bearing structural suspension strut. [1, 2]
  • Housing/Clamping Area Outer Diameter: 50 mm or 55 mm base outer diameter variants (critical configuration check for standard vs. sports/heavy-duty chassis platforms). [1, 2]
  • Mounting Pattern: Bottom Plate clamping housing paired with a threaded top pin chassis tower anchoring profile. [1]
Core Architectural Specifications (Rear Dampers)
  • Suspension Layout Compatibility: Multi-Link independent axle or rigid Twist-Beam configuration variants.
  • Shock Assembly Design: Standalone non-load-bearing Telescopic Shock Absorber (damper operates completely separate from the independent coil spring seat).
  • Internal Shock Mechanics: Gas-pressure twin-tube setup.
  • Mounting Configuration: Bottom eye housing sleeve cross-bolt paired with a threaded top pin bushing adapter. [1, 2, 3]
Factory OEM & German Aftermarket Component Identification
  • Primary Factory Reference Roots:
    • Front Axle: 1T0413031, 5Q0413023FJ, 5QF413031AC.
    • Rear Axle: 1K0513029CE, 1K0513029MF, 5Q0512009AM. [1, 2, 3, 4, 5, 6]
  • Premium German OE Vendor Configurations (Ex-German / New Alternates):
    • Bilstein (B4 OE Replacement series): 22-131607 (Front), 19-127439 (Rear), 23-238978 (DampTronic electronic control front).
    • Sachs / Lemförder Matrix: 317 330 (Front Axle), 315 910 (Front alternate), 315 912 (Rear Axle).
    • Febi Bilstein Baseline Profile: 193134 (Front strut assembly). [1, 2, 3, 4, 5, 6]

Subaru Legacy Model BH5 Front Shocks

KSh5,000.00
Core Architectural Specifications
    • Suspension Type: Independent MacPherson Strut.
    • Strut Design: Structural Suspension Strut (acts as a load-bearing member).
    • Internal Construction: Gas-Charged Twin-Tube (low-pressure nitrogen gas).
    • Damping Medium: Hydraulic fluid with nitrogen gas charge to prevent aeration.
    • Mounting Configuration: 3-bolt top hat mount chassis connection with a bottom dual-bolt steering knuckle eye bracket.
Dimensional & Fitment Data
    • Chassis Application: Third-Generation Subaru Legacy Touring Wagon (BH5).
    • Axle Placement: Front Axle (side-specific asymmetrical left/right design).
    • Drive Configuration Compatibility: Symmetric All-Wheel Drive (AWD) / Front-Wheel Drive (FWD).
Part Numbers & Factory Cross-References
    • KYB (Excel-G Series) Aftermarket Numbers:
        • Right Hand (Front Driver's Side): 334273
        • Left Hand (Front Passenger's Side): 334274
    • Subaru Genuine OEM Numbers:
        • Right Hand: 20310AE100
        • Left Hand: 20310AE110

Honda N-WGN Shock Absorbers

Original price was: KSh5,500.00.Current price is: KSh4,500.00.

Upgrade your vehicle's ride quality and stability with these high-performance Shock Absorbers for the Honda N-WGN. Sourced as premium Ex-Japan parts, they are engineered to provide superior damping and comfort, ensuring your "Kei car" remains smooth and easy to handle on all road surfaces.

PRICE: KSh 4,500

COMPATIBILITY: Precision-engineered for the Honda N-WGN series (JH1 and JH2 models).

Gemini said Subaru Forester SG5 Rear Shock Absorbers

Original price was: KSh9,500.00.Current price is: KSh8,000.00.

Restore the rugged performance and legendary stability of your Subaru Forester SG5 with these high-quality Rear Shock Absorbers. Engineered to eliminate sagging and absorb harsh road impacts, they ensure a smooth, level ride whether you are commuting in the city or exploring off-road trails.

PRICE: KSh 8,000

COMPATIBILITY: Precision-engineered specifically for the Subaru Forester SG5 series (2002–2008).

Gemini said Subaru Impreza Rear Shock Absorber (2007 Model)

Original price was: KSh11,000.00.Current price is: KSh10,000.00.

Restore the legendary handling and stability of your 2007 Subaru Impreza with this high-performance Rear Shock Absorber. Engineered to dampen road impacts and maintain tire-to-road contact, it provides a smooth, controlled ride and sharp cornering precision.

PRICE: KSh 10,000

COMPATIBILITY: Precision-engineered specifically for the 2007 Subaru Impreza (GD/GG series).

Nissan Serena Shock Absorbers

Original price was: KSh4,500.00.Current price is: KSh3,000.00.
Please select your product
Product has been added to your cart
Compare (0)