Toyota Vitz Brake Caliper – Ex-Japan Quality

Genuine Toyota Vitz Brake Caliper –Ex-Japan Quality

Is your Toyota Vitz pulling to one side when you brake, or do you smell burning after a short drive? The brake caliper is a vital safety component that clamps your pads onto the discs. In our dusty Kenyan environment, caliper pistons can seize or seals can leak, leading to dangerous brake failure. At Taleon Autospares, we provide Clean Ex-Japan Brake Calipers that offer a perfect fit for the KSP90, NCP91, KSP130, and NSP135 chassis.

Why “Ex-Japan” is the Best Choice for Your Vitz:

• Original Factory Casting: These are genuine Toyota parts made to the highest Japanese standards. They handle the extreme heat of emergency braking much better than generic “new” clones.

• Tested Pistons & Seals: Sourced from low-mileage vehicles in Japan, these “Grade A” units feature smooth-acting pistons and flexible rubber seals that haven’t been hardened by local heat and neglect.

• Fuel Efficiency & Economy: A sticking caliper creates “brake drag,” forcing your 1.0L or 1.3L engine to work harder and consume more fuel. Our genuine calipers retract fully, keeping your Vitz as economical as the day it was made.

• Direct Bolt-On Fit: Guaranteed to fit your specific model perfectly. All mounting holes, banjo bolt threads, and bleeder screws are intact for a quick, hassle-free installation by your mechanic.

Signs Your Toyota Vitz Needs a New Caliper:

• Vehicle Pulling: The car “veers” to the left or right when you apply the brakes.

• Dragging Sensation: The car feels sluggish or “heavy,” as if the handbrake is slightly on.

• Excessive Wheel Heat: One wheel feels significantly hotter than the others after driving.

• Uneven Pad Wear: One brake pad is completely worn down while the other side is still thick.

• Fluid Leaks: Visible oily wetness around the wheel area or a drop in your brake fluid reservoir level.

Specifications:

• Vehicle Compatibility: Toyota Vitz (KSP90, SCP90, NCP91, KSP130, NSP130, NSP135) / Yaris

• Part Type: Front or Rear Disc Brake Caliper Assembly

• Source: Genuine Ex-Japan (Clean Used)

• Price: KSh 2,500 per unit

Ensure your safety and your car’s efficiency. Visit Taleon Autospares on Kirinyaga Road or call us for nationwide delivery today!

Mechanic’s Tip: When replacing a caliper, it is highly recommended to Flush Your Brake Fluid. Old fluid absorbs moisture and causes the internal rust that seizes calipers in the first place. Using fresh DOT 3 or DOT 4 fluid will protect your new “Ex-Japan” unit for years to come.