Description
Product Description: Mazda CX-5 (KE Series Chassis, 2012–2017 / 2015 Model Year) Electronic Power Steering (EPS) Rack & Pinion Assembly
Overview
The Electronic Power Steering (EPS) Rack & Pinion Assembly for the 2015 Mazda CX-5 (KE Series 1st Gen, KE2FW / KE2AW / KEEFW / KEEAW Chassis, 2.0L / 2.5L SkyActiv-G & 2.2L SkyActiv-D Engines) is a precision-engineered direct replacement steering unit designed to restore original road feedback, low-effort steering, and vehicle control. Equipped with Mazda’s integrated electric power steering assist motor, this complete rack-and-pinion unit resolves stiff steering, uneven turning resistance, electric power steering warning light errors, and front-end steering clunks.
Technical Specifications & Characteristics
-
Vehicle Compatibility: 2015 Mazda CX-5 (KE2FW / KE2AW 2.2L Diesel, KEEFW / KEEAW 2.0L Petrol, KE5FW / KE5AW 2.5L Petrol, FWD & AWD, 2012–2017)
-
Steering System Type: Electric Power Steering (EPS) Rack & Pinion Assembly with integrated electric motor assist module.
-
Driven Position: Available in Right-Hand Drive (RHD – JDM / UK / Kenya Import spec) and Left-Hand Drive (LHD).
-
Assembly Components: High-strength aluminum steering gear housing, induction-hardened steel helical rack shaft, pre-installed inner tie rod ends (rack ends), protective heavy-duty synthetic rubber dust boots, and integrated electric power steering torque sensor module.
-
Power Supply Voltage: Operating voltage 12V DC integrated with ECU dynamic torque control.
-
Mounting Configuration: Direct OEM bolt-on fitment attaching to the front subframe crossmember and lower steering column shaft coupling.
Key Features & Performance Benefits
-
Restores Responsive “Jinba Ittai” Handling: Delivers original smooth, low-friction steering response, precision center tracking, and effortless parking lot maneuverability.
-
Eliminates Steering Clunks & Free Play: Features a precision-machined internal rack gear and guide bush to eliminate hollow thumping sounds when driving over rough gravel or speed bumps.
-
Integrated EPS Torque Sensor & Motor: Factory-calibrated electric assist motor and torque sensor ensure immediate wheel assist without power lag or steering wheel notchiness.
-
Protects Front Axle & Alignment: Keeps front steering geometry locked in position, preventing erratic tire pull and premature tire shoulder wear.
Variant & Fitment Notes (2015 Facelift KE Series)
Important: The 2015 model year represents the mid-cycle facelift for the 1st Generation CX-5 (KE series). While 2WD (FWD) and 4WD (AWD) models use identical EPS steering rack bodies, always verify steering rack sensor pin harness connections and drive orientation (RHD vs. LHD):
-
OEM Reference Numbers (RHD JDM / General Specs):
KD31-32-110,KD31-32-110A,KD31-32-110B,KD35-32-110,KR11-32-110 -
OEM Reference Numbers (LHD Specs):
KD45-32-110,KD45-32-110A,KR12-32-110 -
Popular Aftermarket Brands: JIKIU, Febest, CTR, Koyo, SKF, and Certified Factory Remanufactured Units.







There are no reviews yet.