Toyota Passo Model 2010 Engine Mountain

(0 Reviews) Write a review
First Generation (Early 2010 / 2004–2010: KGC10, KGC15, QNC10)

This version typically pairs with either a 1.0L (1KR-FE) or a 1.3L (K3-VE) engine. It utilizes a multi-mount layout consisting of independent right, left, and rear insulators. [1]
  • Right Engine Mount (Front Right / Timing Belt Side):
    • Type: Hydraulic (Hydro) fluid-filled dampener designed to isolate high-frequency engine vibration.
    • Body Material: Cast iron or heavy-gauge steel housing.
    • Core Material: Natural Rubber (NR) shock-reducing compound.
    • OEM Part Numbers: 12305-B1021, 12305-B1013, 12305-B1010. [1, 2, 3]

  • Left Engine Mount (Transmission Side):
    • Type: Rubber cushion insulator.
    • OEM Part Numbers: 12306-B1020, 12306-B1030. [1]

  • Rear Engine Mount (Torque Rod / Firewall Side):
    • Type: Anchor bracket insulator to prevent front-to-back engine pitching during acceleration.
    • OEM Part Numbers: 12309-B1020, 12309-B1040. [1]

Second Generation (Late 2010 / 2010–2016: KGC30, KGC35, NGC30)

Introduced in February 2010, this generation structural redesign accompanies the 1.0L (1KR-FE) and the newer 1.3L (1NR-FE) dual VVT-i engines. The mounting architecture was modified for improved cabin noise, vibration, and harshness (NVH) levels. [1, 2]
  • Left Engine Mount (Transmission Side):
    • Type: Enhanced rubber-to-metal bonded insulation assembly.
    • OEM Part Number: 12306-B1080. [1, 2]

  • Right Engine Mount & Rear Brackets:
    • Type: Transverse-engine structural frame brackets.
    • OEM Part Number (Rear Bracket No. 1): 12321-B1070. [1]

Material & Operational Characteristics

  • Vibration Absorption: The right-hand primary mount relies on a hydraulic fluid chamber. This fluid shifts inside internal orifices to counteract engine frequencies at idle, keeping the 3-cylinder (1KR-FE) inherently balanced engine noise out of the cabin. [1, 2]
  • Hardness Standard: The rubber components meet automotive Shore A hardness standards to deliver a balance between structural rigidity (preventing engine shift) and pliability (dampening shock).

KSh4,000.00

In stock
Buy now

Description

Product Description: Toyota Passo / Daihatsu Boon (KGC30 / KGC35 / NGC30 Chassis, 2010–2016 / 2010 Model Year) Engine & Transmission Mounting Kit (3-Piece Set)

Overview

The Engine & Transmission Mounting Kit for the 2010 Toyota Passo & Daihatsu Boon (KGC30 1.0L 1KR-FE & NGC30 1.3L 1NR-FE Engine Series, 2nd Generation 2010–2016, 2WD & 4WD with CVT Automatic Transmissions) is a complete 3-piece replacement set engineered to restore factory engine alignment, smooth idle refinement, and vibration isolation. Specially designed to manage the unique balance characteristics of Toyota’s 3-cylinder and 4-cylinder compact powertrains, this kit replaces hardened, sagging, or cracked rubber mounts to eliminate dashboard rattles, cabin shudder, and drivetrain movement.

Technical Specifications & Characteristics

  • Vehicle Compatibility: 2010 Toyota Passo & Daihatsu Boon (KGC30 1.0L FWD, KGC35 1.0L 4WD, NGC30 1.3L FWD, 2nd Generation 2010–2016)

  • Powertrain Compatibility: 1.0L 1KR-FE Inline-3 Petrol and 1.3L 1NR-FE Inline-4 Petrol paired with Super CVT-i Transmissions

  • Set Composition (Complete 3-Piece Set):

    1. Right-Hand (RH / Engine Side) Upper Hydraulic Mount: Positioned on the timing belt/chain side; supports primary engine mass and absorbs vertical combustion shocks via an internal fluid-filled chamber.

    2. Left-Hand (LH / Transmission Side) Mount: Positioned under the battery tray/air box; secures the CVT gearbox casing to the left frame rail.

    3. Rear (Lower Torque Rod / Pitch Suppressor) Mount: Positioned underneath between the subframe and transmission casing; controls fore-aft engine tilt under acceleration and braking.

  • Material Construction: Lightweight high-strength cast aluminum alloy and stamped structural steel fitted with high-durometer Natural Rubber (NR) bushings and sealed internal hydraulic fluid damping chambers.

  • Fitment Type: Direct factory bolt-on fitment using original subframe and body chassis mounting holes.

Key Features & Performance Benefits

  1. Eliminates 3-Cylinder Idle Shudder & Dashboard Rattle: Absorbs low-frequency harmonic vibrations inherent to the 1.0L 1KR-FE engine, stopping steering wheel shake and cabin buzzing in ‘D’ or ‘R’.

  2. Smooths CVT Shift Engagement & Acceleration: Prevents engine and gearbox tilt during throttle application, eliminating harsh clunks or lurching when taking off from a stop.

  3. Restores Proper Drivetrain Alignment: Keeps the engine locked in factory position, protecting CV drive axles, exhaust flex pipes, and radiator hoses from excessive physical stress.

  4. Hydraulic Damping Isolation: Features OEM-spec hydraulic fluid dampening in the upper right-hand mount to absorb dynamic engine movements and road shock.

Variant & Fitment Notes (1.0L KGC30 vs. 1.3L NGC30 / 2WD vs. 4WD)

Important: While 1.0L (KGC30) and 1.3L (NGC30) models share the same general chassis layout, the right-hand hydraulic engine mount bracket offset and lower rear torque rod length differ slightly between the 3-cylinder 1.0L engine and 4-cylinder 1.3L engine:

  • 1.0L 1KR-FE Petrol (KGC30 / KGC35) OEM Reference:

    • RH Engine Mount: 12305-B1060, 12305-B1061, 12305-B1020

    • LH Transmission Mount: 12372-B1030, 12372-B1020

    • Rear Torque Rod Mount: 12371-B1030, 12371-B1020

  • 1.3L 1NR-FE Petrol (NGC30) OEM Reference:

    • RH Engine Mount: 12305-B1070, 12305-B1080

    • LH Transmission Mount: 12372-B1040

    • Rear Torque Rod Mount: 12371-B1040

  • Popular Aftermarket Brands: Yamato, Febest, JIKIU, Tenacity, RBI, and Hardrace.

Reviews

There are no reviews yet.

Be the first to review “Toyota Passo Model 2010 Engine Mountain”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)