Toyota Axio Model 2007-2012 Engine Mountain

(0 Reviews) Write a review
Toyota Corolla Axio (2007–2012) Engine Mount Technical Specifications

The Toyota Corolla Axio spanning the 2007–2012 production timeline belongs to the E140 platform generation (chassis codes: NZE141, NZE144, ZRE142, ZRE144). It utilizes a 4-point structural engine suspension matrix designed to handle transverse powertrain configurations. [1, 2, 3]
1. Component Matrix & Factory Part Numbers

  • Right-Hand Side (RH) Engine Mount:
    • Type: Liquid-filled hydro-elastic engine cushion assembly (utilizes specialized hydraulic oil internals to suppress low-frequency structural powertrain shudder at idle).
    • OEM Part Numbers: 12305-21300 / 12305-21220 (1.5L 1NZ-FE); 12305-37091 (1.8L 2ZR-FE / 2ZR-FAE). [1, 2]

  • Left-Hand Side (LH) Gearbox/Transmission Mount:
    • Type: High-damping rubber-to-metal isolator stabilizing the transmission case assembly.
    • OEM Part Numbers: 12372-21150 / 12372-21240 (CVT and Manual variants). [1, 2]

  • Rear Engine Torque Rod/Steady Mount:
    • Type: Longitudinal roll-control torque stopper (prevents back-and-forth rotational engine displacement under clutch release or rapid deceleration).
    • OEM Part Numbers: 12371-21150 / 12371-21250. [1]

  • Front Engine Mount Buffer:
    • Type: Snubber structural damper.
    • OEM Part Number: 12361-21040 / 12361-21050. [1]

2. Material Composition & Structural Standards

  • Chassis Core Framing: Robotic MIG-welded stamped high-tensile carbon steel housings mated to structural cast-aluminum block-side mounting brackets. [1]
  • Elastomeric Core: Vulcanized natural rubber (NBR/NR matrix) engineered for continuous oil resistance and high thermal stability within the engine bay. [1, 2]
  • Dampening Medium: Glycol-based fluid buffer built directly into the internal chamber of the RH passenger-side assembly. [1]
3. Drivetrain & Layout Fitment Metrics

  • 2WD / FF Variants (NZE141, ZRE142): Utilize flat, non-extended rear roll isolation brackets that anchor directly into the front crossmember subframe channel. [1, 2]
  • 4WD Variants (NZE144, ZRE144): Employ a modified clearance geometry bracket setup on the rear mount assembly to provide necessary spatial clearance for the transfer case output flange and intermediate drive shafts. [1]

KSh4,000.00

In stock
Buy now

Description

Product Description: Toyota Corolla Axio / Fielder (NZE141 & ZRE142 Chassis, 2007–2012 Model Years) Engine & Transmission Mounting Kit (4-Piece Set)

Overview

The Engine & Transmission Mounting Kit for the Toyota Corolla Axio Sedan & Corolla Fielder Wagon (NZE141 1.5L 1NZ-FE & ZRE142 1.8L 2ZR-FE / 2ZR-FAE, 140-Series 2007–2012 Model Years, 2WD Platform) is a complete 4-piece replacement set engineered to support the powertrain, eliminate deep cabin vibrations, and preserve smooth gear shifting. Designed to isolate dynamic combustion shocks and transmission torque from the unibody frame, this kit replaces hardened, cracked, or fluid-leaking factory mounts to restore factory-smooth idling and quiet driving comfort.

Technical Specifications & Characteristics

  • Vehicle Compatibility: 2007–2012 Toyota Corolla Axio Sedan & Corolla Fielder Wagon (NZE141 1.5L 2WD & ZRE142 1.8L 2WD)

    • (Also cross-fits Toyota Allion / Premio NZT260 / ZRT260 sharing 1NZ/2ZR 2WD platform layouts).

  • Powertrain Compatibility: 1.5L 1NZ-FE DOHC VVT-i and 1.8L 2ZR-FE / 2ZR-FAE Valvematic engines paired with Super CVT-i or 4-Speed Automatic Transmissions.

  • Set Composition (Complete 4-Piece Set):

    1. Right-Hand (RH / Engine Side) Hydraulic Mount: Positioned on the timing cover side; supports primary engine weight and features an internal oil-filled hydraulic chamber to dampen high-frequency vertical engine vibrations.

    2. Left-Hand (LH / Transmission Side) Mount: Positioned under the air filter intake box and battery tray; secures the gearbox casing directly to the left frame rail.

    3. Rear Lower Engine Mount (Pitch Suppressor / Stopper): Positioned underneath between the front subframe crossmember and transmission bellhousing; controls fore-aft engine rocking during throttle acceleration and hard braking.

    4. Front Lower Engine Mount (Torque Rod): Positioned at the front lower subframe crossmember; stabilizes longitudinal powertrain movement under load changes.

  • Material Construction: Heavy-duty cast aluminum housings, stamped structural steel mounting brackets, high-durometer Natural Rubber (NR) compounds, and sealed hydraulic fluid dampening chambers.

  • Fitment Type: Direct factory bolt-on fitment using original subframe and unibody frame mounting locations.

Key Features & Performance Benefits

  1. Eliminates Dashboard Shudder & Steering Wheel Vibration: Absorbs low-frequency engine rumbles, stopping steering wheel buzz, dashboard rattling, and cabin shudder when idling in ‘D’ or stopped at traffic lights.

  2. Smooths Throttle Engagement & Gear Shifts: Prevents engine and transmission tilt under load, eliminating heavy thumps, drivetrain lurching, or jerking when pressing the accelerator pedal.

  3. Protects CV Axles & Exhaust Plumbing: Holds the powertrain in precise factory alignment, protecting inner CV axle joints, boot seals, and exhaust flex pipes from excessive mechanical twisting stress.

  4. Hydraulic Vibration Isolation: Features an OEM-spec hydraulic fluid chamber inside the primary upper right engine mount to absorb severe road impacts and high-frequency engine harmonics before they reach the cabin.

Variant & Fitment Notes (1.5L NZE141 2WD vs. 1.8L ZRE142 2WD vs. 4WD NZE144/ZRE144)

Important: While 1.5L (NZE141) and 1.8L (ZRE142) 140-series Axio/Fielder models share identical front and rear lower stopper mounts, the right-hand hydraulic engine mount bracket offset and left-hand transmission mount vary between 1.5L and 1.8L engine blocks, as well as between 2WD and 4WD (NZE144 / ZRE144) chassis setups:

  • 1.5L 2WD (NZE141 / 1NZ-FE) OEM Reference:

    • RH Hydraulic Engine Mount: 12305-21220, 12305-21230

    • LH Transmission Mount: 12372-21150, 12372-0T020

    • Rear Lower Mount: 12371-21160, 12371-0T010

    • Front Lower Mount: 12361-21090, 12361-0T010

  • 1.8L 2WD (ZRE142 / 2ZR-FE) OEM Reference:

    • RH Hydraulic Engine Mount: 12305-0T010, 12305-37010

    • LH Transmission Mount: 12372-37010, 12372-0T030

  • Popular Aftermarket Brands: Yamato, Febest, JIKIU, Tenacity, RBI, Hardrace, and Anchor.

Reviews

There are no reviews yet.

Be the first to review “Toyota Axio Model 2007-2012 Engine Mountain”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)