Mazda Demio 2007-2014 Axel Beam

(0 Reviews) Write a review
Part Numbers & Identification

  • OEM Part Numbers (2WD Variants): D651-28-B00B, D521-28-B00A, DR61-28-B00A
  • OEM Part Number (4WD / e-4WD Variants): DA6A-28-B0XG
  • Ford Platform Reference: 8V51-5K952-CK (Shares global architecture with the Ford Fiesta Mark 7/WT series)
  • Chassis Layout Codes: DBA-DE3FS (1.3L 2WD), DBA-DE5FS (1.5L 2WD), DBA-DE3AS (1.3L 4WD), DBA-DEJFS (1.3L SkyActiv) [1, 2, 3, 4, 5]
Structural & Suspension Specs

  • Suspension Design Type: Twist-beam / Torsion beam rear axle assembly with integrated trailing arms.
  • Braking System Layout: Integrated mounting flanges for standard drum brake backplates (with ABS speed sensor routing provisions).
  • Spring Seat Configuration: Lower spring pans welded to the beam structural tube, optimized for linear barrel-type coil springs.
  • Damper Mounts: Single-bolt pin/clevis mount welded to the trailing arm configuration. [1, 2, 3]
Axle Bushing Dimensions

  • OEM Bushing Part Numbers: D651-28-460, DG80-28-460, DR61-28-460
  • Bushing Inside Diameter (ID): 17 mm
  • Bushing Outside Diameter (OD): 71 mm
  • Bushing Total Length (L): 78 mm
  • Composition: Vulcanized rubber-to-metal bonded hydraulic or solid isolation bushing.

KSh35,000.00

In stock
Buy now

Description

Product Overview

The Rear Axle Beam (often referred to as a torsion beam or twist-beam axle) is the primary structural rear suspension and wheel-locating assembly for the third-generation Mazda Demio (DE platform). Designed as a semi-independent suspension system, this heavy-duty steel beam spans the width of the vehicle, integrating the rear wheels, coil spring perches, shock absorber mounts, and trailing arm bushings into a single robust unit. It is engineered to provide predictable handling, maximize interior cargo space, and maintain precise rear wheel alignment under daily driving conditions.

Key Technical Specifications

(Standard specifications for the Mazda Demio DE 2007–2014 rear axle beam):

  • Fitting Position: Rear Axle Assembly (Spanning left and right rear wheel hubs)

  • Compatibility: Fits Mazda Demio DE-generation hatchback models (model years 2007–2014, including 1.3L [ZJ-VE] and 1.5L [ZY-VE] engine variants, equipped with manual, automatic, or CVT transmissions, in both 2WD [FF] and regional 4WD configurations).

  • Design Type: Stamped and welded tubular torsion beam assembly featuring integrated trailing mounting points, coil spring seats, lower shock absorber brackets, and pre-pressed rubber pivot bushings.

Material & Build Quality

  • Beam Construction: Fabricated from high-strength structural steel tubes and stamped brackets engineered to withstand heavy vertical loads, torsional twist during cornering, and localized stress from bumps and potholes.

  • Pivot Bushings: Equipped with heavy-duty, factory-pressed vulcanized rubber bushings at the chassis mounting points to allow controlled vertical movement while isolating road noise and harshness from the cabin.

  • Corrosion Protection: Finished with a heavy-duty industrial anti-corrosion coating or rust-resistant primer to withstand exposure to road salt, mud, water, and debris in the exposed rear undercarriage.

OEM & Cross-Reference Part Numbers

  • Mazda OEM Reference Numbers:

    • D651-28-800, D652-28-800 (or platform-specific regional JDM / export variants)

  • Popular Aftermarket / Salvage Brands: Genuine OEM, Febest (for replacement bushings), GSP, and certified JDM recycled assemblies.

Function & Importance

  1. Rear Wheel Location: Securely links and aligns the rear wheels to the unibody chassis, ensuring proper tracking and thrust angles.

  2. Load & Spring Support: Acts as the physical mounting platform for the rear coil springs and dampers, supporting both vehicle weight and cargo loads.

  3. Controlled Flexibility: Provides a controlled degree of twist (torsion) between the left and right wheels to absorb uneven bumps while keeping the tires flat against the road surface.

Common Signs of a Worn or Damaged Rear Axle Beam

While rear axle beams are built to last the lifetime of the vehicle, they can suffer damage from severe impacts (such as hitting a deep curb or pothole) or bushing wear over time. Warning signs include:

  • Clunking, Clattering, or Knocking Noises: A heavy metallic thud or hollow knock from the rear when driving over speed bumps or rough road surfaces.

  • Rear-End Tracking Issues / Dog-Tracking: The vehicle feels like it is driving sideways or drifting, or the steering wheel must be held slightly off-center to drive straight due to a bent beam or failed pivot bushing.

  • Uneven Rear Tire Wear: Severe feathering, cupping, or edge-wear on the rear tires caused by altered rear camber or toe geometry.

  • Visible Structural Damage: Cracks around the welded brackets, bent metal tubing, or completely torn, sagging rubber pivot bushings.

Reviews

There are no reviews yet.

Be the first to review “Mazda Demio 2007-2014 Axel Beam”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)