Description
Product Description: Toyota 1NZ-FE 1.5L “Slim” Bare Engine Block Assembly (Ex-Japan Probox / Succeed / Fielder / Vitz)
Overview
The “Slim” Bare Engine Block Assembly (complete cylinder block with head, without external bolt-on accessories) for the Toyota 1NZ-FE 1.5L DOHC 16-Valve VVT-i 4-Cylinder Petrol Engine is a high-grade, low-mileage Ex-Japan imported core unit. Specifically tailored for commercial fleets and personal utility vehicles such as the Toyota Probox & Succeed (NCP51V / NCP58G / NCP160V Chassis) as well as matching 1.5L Toyota models, this “slim” engine setup provides a cost-effective, plug-and-play solution for replacing blown, overheated, or oil-burning engines while retaining your original vehicle’s alternator, starter motor, intake/exhaust manifolds, and wiring harness.
Technical Specifications & Characteristics
-
Engine Code: Toyota 1NZ-FE
-
Configuration: 1.5-Liter Inline 4-Cylinder, DOHC 16-Valve with Variable Valve Timing with intelligence (VVT-i)
-
Displacement: 1,497 cc (87.5 mm stroke × 75.0 mm bore)
-
Compression Ratio: 10.5:1 (Naturally Aspirated)
-
Power Output Rating: ~108–109 hp @ 6,000 RPM | 141 Nm Torque @ 4,200 RPM
-
Engine Type Definition (“Slim / Bare Engine”): Includes the complete internal long-block assembly:
-
Cylinder block fitted with crankshaft, connecting rods, and pistons.
-
Complete cylinder head with valves, camshafts, and VVT-i gear.
-
Internal timing chain assembly, oil pump, water pump casing, and lower oil pan.
-
Excludes: Alternator, starter motor, A/C compressor, intake manifold, throttle body, exhaust manifold, ignition coils, and ECU/wiring harness.
-
-
Sourcing & Import Condition: Direct Ex-Japan import, low mileage, compression-tested, oil-sump inspected, and leak-checked.
Key Features & Performance Benefits
-
Cost-Effective Engine Overhaul Solution: Avoids the high cost of buying full engine accessory packages when your vehicle’s original external ancillaries (starter, alternator, manifold) are still fully functional.
-
Restores Factory Power & Compression: Cures chronic oil consumption, excessive tailpipe smoke, low cylinder compression, and bottom-end rod knocks.
-
Low-Mileage Ex-Japan Sourced: Sourced directly from Japanese domestic market (JDM) vehicles with strictly enforced maintenance histories, ensuring minimal internal cylinder bore and camshaft wear.
-
Direct Plug-and-Play Fitment: Standardized Toyota block dimensions ensure seamless bolt-on alignment with your original transmission bellhousing, engine mount brackets, and exhaust connections.
Vehicle Compatibility & Application Notes
Important: The 1NZ-FE engine is one of Toyota’s most widely used 1.5L engines. While the core block and cylinder head are identical across most applications, minor differences exist in oil dipstick tube positions or valve cover baffle layouts between 1st Generation (NCP50 series) and late-model Probox vans:
-
Primary Probox & Succeed Applications:
-
Toyota Probox Van: NCP51V / NCP58G (2WD), NCP55V / NCP59G (4WD) (2002–2014)
-
Toyota Probox / Succeed: NCP160V / NCP165V (2014–Present)
-
-
Cross-Compatible Toyota Models (with 1NZ-FE 1.5L):
-
Corolla Fielder & Axio: NZE121 / NZE141 / NZE161
-
Toyota Vitz / RS / Belta / Yaris: NCP13 / NCP91 / NCP131 / NCP96
-
Toyota Ractis / Sienta / Porte: NCP100 / NCP120 / NCP81G / NNP11 / NNP15
-
Toyota Premio / Allion: NZT240 / NZT260
-
-
Fuel & Oil Requirements: 4.0 Liters of 5W-30 or 10W-40 Synthetic Blend Engine Oil; runs on standard unleaded petrol.







There are no reviews yet.