1NZ Slim Engine Probox

(0 Reviews) Write a review
1. Architectural & Core Specifications
  • Engine Code: 1NZ-FE (Late-generation “Slim” architecture).
  • Configuration: Transverse Inline 4-cylinder, 4-stroke, petrol.
  • Valvetrain: DOHC (Double Overhead Cam), 16 valves, chain-driven with VVT-i on the intake camshaft.
  • Displacement: 1,496 cc (1.5 Litres).
  • Bore x Stroke: 75.0 mm x 84.7 mm.
  • Compression Ratio: 10.5:1 to 11.0:1 (depending on the exact manufacturing year).
2. Performance Outputs
  • Maximum Power: 105 to 109 hp (77 to 80 kW) @ 6,000 RPM.
  • Maximum Torque: 138 to 141 N·m (102 to 104 ft-lbs) @ 4,200 RPM.
  • Fuel System: Multi-point Electronic Fuel Injection (EFI) governed by an ETCS-i (Electronic Throttle Control System-intelligent) drive-by-wire system.
3. Key Upgrades Over the Older “Fat” 1NZ Engine
The mechanical enhancements that give the “Slim” engine its distinctive look and character include:
  • Roller Rocker Arms: The valvetrain features integrated needle-bearing roller rockers instead of flat bucket lifters, significantly reducing internal friction and valvetrain noise.
  • Hydraulic Lash Adjusters (HLAs): Uses oil pressure to maintain zero valve clearance automatically. This eliminates the need for periodic manual valve shim maintenance.
  • Plastic Intake Manifold: A compact, lightweight, and curved composite plastic runner system replaces the bulkier aluminum intake setup found on early-2000s models.
  • Ignition Blocks: Utilizes updated, narrower Stick Coil-on-Plug (COP) ignition coils that slide straight down into a tighter valve cover design.
4. Critical Maintenance Specifications
Because the Slim engine relies on tighter internal oil clearance paths and hydraulic valve components, using the correct lubricants is paramount to preventing early timing chain wear or hydraulic lash ticking.

Service Category Factory Recommended Data
Recommended Oil Viscosity 0W-20 (Highly Recommended) or 5W-30 Fully Synthetic
Engine Oil Capacity 3.7 Litres (with new oil filter change) / 3.4 Litres dry drain
Spark Plug Type Iridium / Platinum Long-Life (e.g., NGK DF6H-11B or equivalent)
Spark Plug Electrode Gap 1.1 mm (0.043 inches)
Firing Order 1 — 3 — 4 — 2
Cooling System Capacity 4.8 Litres (Toyota Super Long Life Coolant – Pink)
Timing Component Maintenance-free steel Timing Chain (requires no interval changes)

KSh130,000.00

In stock
Buy now

Description

Product Description: Toyota 1NZ-FE 1.5L “Slim” Bare Engine Block Assembly (Ex-Japan Probox / Succeed / Fielder / Vitz)

Overview

The “Slim” Bare Engine Block Assembly (complete cylinder block with head, without external bolt-on accessories) for the Toyota 1NZ-FE 1.5L DOHC 16-Valve VVT-i 4-Cylinder Petrol Engine is a high-grade, low-mileage Ex-Japan imported core unit. Specifically tailored for commercial fleets and personal utility vehicles such as the Toyota Probox & Succeed (NCP51V / NCP58G / NCP160V Chassis) as well as matching 1.5L Toyota models, this “slim” engine setup provides a cost-effective, plug-and-play solution for replacing blown, overheated, or oil-burning engines while retaining your original vehicle’s alternator, starter motor, intake/exhaust manifolds, and wiring harness.

Technical Specifications & Characteristics

  • Engine Code: Toyota 1NZ-FE

  • Configuration: 1.5-Liter Inline 4-Cylinder, DOHC 16-Valve with Variable Valve Timing with intelligence (VVT-i)

  • Displacement: 1,497 cc (87.5 mm stroke × 75.0 mm bore)

  • Compression Ratio: 10.5:1 (Naturally Aspirated)

  • Power Output Rating: ~108–109 hp @ 6,000 RPM | 141 Nm Torque @ 4,200 RPM

  • Engine Type Definition (“Slim / Bare Engine”): Includes the complete internal long-block assembly:

    • Cylinder block fitted with crankshaft, connecting rods, and pistons.

    • Complete cylinder head with valves, camshafts, and VVT-i gear.

    • Internal timing chain assembly, oil pump, water pump casing, and lower oil pan.

    • Excludes: Alternator, starter motor, A/C compressor, intake manifold, throttle body, exhaust manifold, ignition coils, and ECU/wiring harness.

  • Sourcing & Import Condition: Direct Ex-Japan import, low mileage, compression-tested, oil-sump inspected, and leak-checked.

Key Features & Performance Benefits

  1. Cost-Effective Engine Overhaul Solution: Avoids the high cost of buying full engine accessory packages when your vehicle’s original external ancillaries (starter, alternator, manifold) are still fully functional.

  2. Restores Factory Power & Compression: Cures chronic oil consumption, excessive tailpipe smoke, low cylinder compression, and bottom-end rod knocks.

  3. Low-Mileage Ex-Japan Sourced: Sourced directly from Japanese domestic market (JDM) vehicles with strictly enforced maintenance histories, ensuring minimal internal cylinder bore and camshaft wear.

  4. Direct Plug-and-Play Fitment: Standardized Toyota block dimensions ensure seamless bolt-on alignment with your original transmission bellhousing, engine mount brackets, and exhaust connections.

Vehicle Compatibility & Application Notes

Important: The 1NZ-FE engine is one of Toyota’s most widely used 1.5L engines. While the core block and cylinder head are identical across most applications, minor differences exist in oil dipstick tube positions or valve cover baffle layouts between 1st Generation (NCP50 series) and late-model Probox vans:

  • Primary Probox & Succeed Applications:

    • Toyota Probox Van: NCP51V / NCP58G (2WD), NCP55V / NCP59G (4WD) (2002–2014)

    • Toyota Probox / Succeed: NCP160V / NCP165V (2014–Present)

  • Cross-Compatible Toyota Models (with 1NZ-FE 1.5L):

    • Corolla Fielder & Axio: NZE121 / NZE141 / NZE161

    • Toyota Vitz / RS / Belta / Yaris: NCP13 / NCP91 / NCP131 / NCP96

    • Toyota Ractis / Sienta / Porte: NCP100 / NCP120 / NCP81G / NNP11 / NNP15

    • Toyota Premio / Allion: NZT240 / NZT260

  • Fuel & Oil Requirements: 4.0 Liters of 5W-30 or 10W-40 Synthetic Blend Engine Oil; runs on standard unleaded petrol.

Reviews

There are no reviews yet.

Be the first to review “1NZ Slim Engine Probox”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)