Mazda Demio Model 2016 Lower Control Arm

(0 Reviews) Write a review
1. Dimensional & Sizing Specifications
  • Total Component Length: 350 mm
  • Total Component Height: 82 mm
  • Component Width: ~50 mm (at base structural track profile)
  • Ball Joint Cone/Pin Diameter: Ø 16 mm (Note: Certain reinforced aftermarket replacement matrices utilize a 17.5 mm variant; standard factory OE specification measures 16 mm).
  • Thread Size / Fitting Type: Pinch Bolt alignment configuration (16 mm)
  • Inner Bushing Bolt Hole Diameter: 10.4 mm [1, 2, 3]
2. OEM Part Numbers & Cross-References
  • Left-Hand Side (LH):
    • Mazda Original Equipment (OE) Codes: DA6A-34-350C, DA7H-34-350, D201-34-350B
    • Major Aftermarket Match: Delphi TC3286 [1]

  • Right-Hand Side (RH):
    • Mazda Original Equipment (OE) Codes: DA6A-34-300C, DA7H-34-300B, D23H-34-300
    • Major Aftermarket Match: Delphi TC3287 [1, 2, 3]

3. Material & Component Architecture
  • Structural Material: High-tensile forged or stamped steel alloy structural matrix finished with an anti-corrosion black powder layer. [1, 2]
  • Pre-Assembled Bushings: Premium vulcanized natural rubber silent-block bushings (one forward cylindrical pivot bushing and one large rear compliance load bushing) engineered to minimize cabin NVH (Noise, Vibration, and Harshness). [1]
  • Ball Joint Mechanism: Maintenance-free, non-adjustable, factory-sealed, pre-greased low-friction ball joint enclosed in a flexible neoprene protective dust boot. [1, 2]
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Mazda Demio / Mazda 2 Hatchback and Sedan (CBA-DJLFS, DBA-DJ3FS, DJ5FS, DJ5AS 4WD).
  • Powertrain Compatibility: 1.3L SkyActiv-G (P3-VPS), 1.5L SkyActiv-G (F5-VPT), and 1.5L SkyActiv-D Diesel (S5-DPTS).
  • Platform Sharing: Shared geometric subframe attachment layout with the Toyota Yaris / Yaris iA (2016+ North American variants derived from the Mazda DJ platform partnership).

KSh5,500.00

In stock
Buy now

Description

Product Overview

The Front Lower Control Arm is a critical structural element of the Mazda Demio’s independent MacPherson strut front suspension. It acts as the lower link connecting the front wheel hub and steering knuckle to the vehicle subframe. Supplied as a complete, ready-to-install unit, it comes pre-assembled with the outer ball joint and inner rubber control arm bushings, allowing for a straightforward, direct bolt-on replacement.

Key Technical Specifications

(Standard specifications for the 2016 Mazda Demio DJ generation front lower control arm):

  • Fitting Position: Front Axle (Available separately for Left Hand / Passenger Side and Right Hand / Driver Side)

  • Design Type: Stamped-steel A-arm / wishbone construction

  • Included Components:

    • 1 x High-Strength Stamped Steel Control Arm Body

    • 1 x Pre-pressed Outer Ball Joint

    • 2 x Pre-installed Inner Rubber Control Arm Bushings (Chassis mount points)

  • Compatibility: Fits DJ-series Mazda Demio / Mazda2 models (Skyactiv-G petrol and Skyactiv-D diesel trims).

Material & Build Quality

  • Material Composition: Engineered from heavy-gauge stamped sheet steel to endure intense vertical road impacts, sharp cornering forces, and rapid braking stress without bending or fatigue.

  • Surface Protection: Finished with a durable black electrophoretic coating to prevent rust, moisture damage, and degradation from road salt and debris.

  • Bushings & Joints: High-durometer rubber bushings are optimized to maintain Mazda’s signature sharp, responsive handling while effectively damping out road harshness. The ball joint features a heavy-duty dust boot to seal out dirt and retain internal lubrication.

OEM & Cross-Reference Part Numbers

  • Mazda OEM Part Numbers:

    • Front Lower Control Arm (Right / RH): DFY1-34-300 / DFY1-34-350 (regional prefix variants apply)

    • Front Lower Control Arm (Left / LH): DFY1-34-350 / DFY1-34-300

  • Popular Aftermarket Brands: TRW, Febest, Moog, NTY, and Japanparts.

Common Signs of Worn Lower Arms

When the rubber bushings crack or the ball joints develop play, a 2016 Mazda Demio will typically display these symptoms:

  1. Clunking or Knocking Sounds: Sharp metallic thuds when navigating speed bumps, potholes, or rough road surfaces.

  2. Steering Wandering: A loose or vague steering feel, forcing you to make frequent minor corrections to keep the car tracking straight on the highway.

  3. Uneven Front Tire Wear: Premature feathering or irregular wear on the inner or outer edges of the front tires due to shifting wheel alignment.

  4. Braking Vibration: A shudder or vibration felt through the steering wheel when applying the brakes.

Reviews

There are no reviews yet.

Be the first to review “Mazda Demio Model 2016 Lower Control Arm”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)