Description
Product Overview
The Front Lower Control Arm is a vital structural suspension and guidance component on the 2012 Honda Fit (GE6 / GE8). Serving as the primary link between the vehicle’s unibody subframe and the front wheel knuckle assembly (via the integrated ball joint), this arm is engineered specifically for Honda’s subcompact platform to maintain precise front-wheel alignment, manage steering and braking loads, and deliver stable, predictable handling.
Key Technical Specifications
(Standard specifications for the 2012 Honda Fit GE lower control arm):
-
Fitting Position: Front Axle (Available separately for Left / Passenger Side and Right / Driver Side)
-
Compatibility: Fits all GE-generation Honda Fit hatchback variants (2008–2014, including 1.3L and 1.5L engine trims, automatic [AT/CVT] and manual [MT] transmissions).
-
Design Type: Pressed-steel wishbone arm assembly complete with pre-pressed rubber inner bushings and a factory-integrated or replaceable outer ball joint (depending on the aftermarket manufacturer specification).
Material & Build Quality
-
Material Composition: High-tensile stamped steel engineered to provide maximum structural rigidity and impact resistance while maintaining optimal unsprung weight for agile handling.
-
Component Integration: Equipped with heavy-duty vulcanized rubber bushings designed to absorb high-frequency road harshness, paired with a precision-machined ball joint protected by a heavy-duty, grease-retaining rubber dust boot.
-
Corrosion Protection: Finished with an industrial anti-corrosion black coating or electrophoretic paint to withstand moisture, road salt, and environmental debris over long-term use.
OEM & Cross-Reference Part Numbers
-
Honda OEM Part Numbers:
-
Right Side (Driver):
51350-TF0-000(or regional platform variants) -
Left Side (Passenger):
51360-TF0-000(or regional platform variants)
-
-
Popular Aftermarket Brands: Febest, GSP, CTR, Moog, NTY, and Delphi.
Function & Importance
-
Wheel Alignment Stability: Holds the lower wheel knuckle firmly in place, ensuring that caster and camber geometry remain accurate during cornering, acceleration, and hard braking.
-
Impact & Vibration Damping: The rubber inner bushings isolate the cabin from sharp road impacts, preventing minor bumps from jarring the steering wheel.
-
Load Transfer: Safely transmits vertical wheel loads and lateral steering forces between the front wheels and the vehicle’s subframe.
Common Signs of a Worn Lower Control Arm on a 2012 Honda Fit
When the inner rubber bushings tear, dry out, or when the ball joint develops internal play due to high mileage, your Honda Fit will typically display these warning signs:
-
Clunking or Knocking Noises: A sharp metallic snap, pop, or hollow thud coming from the front suspension when driving over speed bumps, potholes, or turning the steering wheel.
-
Vague or Wandering Steering: An unstable, loose steering feel where the car drifts or pulls to one side, requiring constant steering corrections at highway speeds.
-
Uneven Front Tire Wear: Rapid or irregular feathering and wear along the inner or outer edges of the front tires caused by shifting alignment geometry.







There are no reviews yet.