Nissan Tiida Wheel Hub

(0 Reviews) Write a review
The Nissan Tiida (primarily the C11 and C12 generations) utilizes a fully integrated wheel hub and bearing assembly for both the front and rear axles. Because specifications differ significantly depending on the market region (e.g., Japan/Australia vs. Europe/Americas) and ABS configurations, the data is split by standard setups. [1, 2, 3, 4]
Front Wheel Hub Specifications

The front wheel hub houses the internal splines that receive power from the CV axle shaft. [1]
  • Spline/Teeth Quantity: 25 teeth on the input shaft.
  • Bolt Pattern (PCD): Commonly 4 x 114.3 mm (Standard JDM/Global models) or 4 x 100 mm (Select European variants).
  • Flange Outer Diameter: 122 mm to 136 mm (depending on PCD configuration).
  • Hub Pilot Diameter: 80 mm.
  • Mounting Configuration: 3-bolt triangular mounting flange to the steering knuckle.
  • Wheel Stud Thread Size: M12 x 1.25. [1, 2, 3, 4, 5, 6, 7]
Rear Wheel Hub Specifications

The rear hub assembly varies drastically between front-wheel drive (FWD) and all-wheel drive (4WD) e-4WD models. The standard FWD rear assembly includes: [1]
  • Flange Outer Diameter: 134 mm to 148 mm.
  • Center Bore / Wheel Pilot Diameter: 66 mm to 68 mm.
  • Mounting Configuration: 4-bolt square pattern to the rear trailing axle.
  • ABS Integration: Available as standard magnetic encoder ring variants or non-ABS variants. [1, 2, 3]
Critical Torque Specifications

Adhering to correct torque specifications is mandatory during installation to avoid premature wheel bearing failure: [1]
  • Front Wheel Hub Central Axle Nut: 113 Nm (83 ft-lbs)
  • Hub Assembly-to-Knuckle Bolts (Front): 88.3 Nm (65 ft-lbs)
  • Hub Assembly-to-Axle Bolts (Rear): 94.3 Nm (70 ft-lbs)
  • Wheel Lug Nuts: 113 Nm (83 ft-lbs)

KSh4,000.00

In stock
Buy now

Description

The Nissan Tiida Wheel Hub (often referred to as a wheel hub assembly or hub bearing unit) is a crucial load-bearing and rotational component located at the center of the wheel. It connects the vehicle’s wheels to the suspension and braking systems while allowing the wheels to spin smoothly with minimal friction.

1. General Product Description

  • Part Type: Wheel Hub Assembly / Wheel Bearing Unit

  • Application: Nissan Tiida (including hatchback and sedan variants, chassis codes such as C11, C12, and C13, across generations from 2004 to present).

  • Position: Available for both Front and Rear axles.

    • Front hubs are often integrated with drive-axle splines and separate or press-fit bearings depending on the exact sub-model.

    • Rear hubs on many Tiida models are complete sealed unit-bearing assemblies bolted directly to the rear axle beam.

  • ABS Integration: Most modern Nissan Tiida wheel hubs feature an integrated ABS (Anti-lock Braking System) magnetic encoder ring or sensor tone ring that communicates wheel speed to the vehicle’s computer.

2. Key Specifications & Physical Characteristics

  • Construction: Heavy-duty forged steel flange with precision-machined wheel bolt studs (typically a 4-lug or 5-lug pattern depending on the exact market/spec, with 4×100 or 4×114.3 being common for compact Nissan platforms).

  • Bearing Type: Sealed, pre-adjusted double-row ball or tapered roller bearings designed to handle both radial loads (the weight of the car) and axial loads (cornering forces).

  • Sealing: Outfitted with high-performance multi-lip rubber seals to prevent contamination from water, mud, salt, and road debris, which premature bearing failure.

  • Pre-assembled Unit: Modern replacement hubs come as pre-pressed, sealed units, reducing installation time and eliminating the need to manually pack grease or press individual loose bearings.

3. Common Signs of a Failing Wheel Hub/Bearing

  • Humming or Grunting Noise: A continuous low-pitched drone, growl, or humming sound that typically gets louder as the vehicle accelerates or when turning in a specific direction.

  • Vibration: Steering wheel vibration or a loose/wobbly feeling while driving at highway speeds.

  • ABS Warning Light: Failure or damage to the internal magnetic encoder ring can trigger the ABS or traction control warning light on the dashboard.

  • Play in the Wheel: If you jack up the car and grab the tire at the 12-o’clock and 6-o’clock positions, noticeable rocking or looseness indicates a worn-out hub bearing.

Reviews

There are no reviews yet.

Be the first to review “Nissan Tiida Wheel Hub”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)