Wheel Hub Assemblies & Bearings: Smooth Rotation for Every Journey

Are you hearing a low humming or growling sound that gets louder as you speed up? It’s a classic sign of a failing wheel hub assembly. At Taleon Autospares Kenya, we supply premium-grade wheel hubs and bearings engineered to handle the heavy loads and rough road conditions across Kenya.

Why Your Wheel Hub is Critical

The wheel hub is the central component that connects your wheel to the vehicle’s suspension. It houses the wheel bearing, which allows your tires to spin freely with minimal friction. In the Kenyan climate—characterized by heat, dust, and occasional flooding—maintaining a healthy hub is vital for:

  • Silent Performance: Our Taleon wheel hubs feature precision-ground bearings that eliminate the annoying “drone” or “grinding” noises caused by worn-out internals.

  • ABS & Safety Integration: Modern hubs (like those for the Toyota Vanguard, Nissan X-Trail T32, or Mazda CX-5) often contain the ABS speed sensor. A faulty hub can trigger your dashboard warning lights and compromise your braking safety.

  • Fuel Efficiency: A seized or “tight” bearing creates drag, forcing your engine to work harder and increasing your fuel consumption on long highway trips.

  • Durability Against Contaminants: Our hubs are fitted with multi-lip seals to keep out the fine Kenyan dust and moisture, significantly extending the life of the bearing.

Our Range of Hub Solutions

We stock both complete assemblies and individual bearings to suit your repair budget:

  • Full Hub Assemblies: “Bolt-on” units that include the hub, bearing, and ABS sensor for a faster, more reliable installation.

  • Pressed Wheel Bearings: High-quality individual bearings from world-leading brands like NSK, NTN, and KOYO for older models like the Toyota NZE or Probox.

  • 4×4 Heavy Duty Hubs: Reinforced units designed for the Toyota Hilux, Land Cruiser, and Isuzu D-Max, capable of withstanding off-road shocks and heavy towing.

Warning Signs of a Failing Wheel Hub

  1. Humming or Growling: A noise that changes pitch when you steer left or right.

  2. Steering Wheel Vibration: Feeling a shudder through the wheel, especially at highway speeds.

  3. ABS Warning Light: Your car’s computer losing the signal from the wheel speed sensor.

  4. Wheel Play: If you jack up your car and the wheel “wobbles” when shaken, your hub is dangerously loose.

Don’t risk a wheel seizure on the highway. Shop at Taleon Autospares—the leading hub and bearing experts on Kirinyaga Road. We offer genuine quality and fast delivery to Mombasa, Nakuru, Kisumu, and Eldoret.

Sort

Nissan Wingroad Y12 Wheel Hub Bearing

KSh4,000.00
Front Wheel Hub Assembly Specifications
The front wheel hub is a complete, sealed bolt-on unit containing double-row angular contact ball bearings. The bearing cannot be pressed out independently; the entire unit must be replaced. [1, 2, 3]
  • Flange Outer Diameter: 122 mm
  • Spline/Teeth Count (CV Axle Input): 25 teeth
  • Bolt Pattern (PCD): 4 x 100 mm
  • Wheel Stud Thread Size: M12 x 1.25
  • ABS Integration: Features a built-in 48-teeth magnetic sensor encoder ring on the inner face.
  • Mounting Configuration: 3-bolt triangular pattern securing directly to the steering knuckle.
  • Common OEM Cross-References: 40202-ED000, 40202-ED02A, 40202-ED05A, and PHU58010. [1, 2, 3, 4]
Rear Wheel Hub Assembly Specifications (FWD Modifications)
For standard Front-Wheel Drive models (such as the DBA-Y12 and DBA-JY12), the rear hub assembly houses the spindle sleeve and bolts straight to the rear trailing axle beam. [1, 2]
  • Flange Outer Diameter: 134 mm
  • Inner Diameter (Center Bore): 25 mm
  • Centering/Pilot Diameter: 68 mm
  • Total Unit Height: 69 mm
  • Bolt Pattern (PCD): 4 x 100 mm
  • Mounting Configuration: 4-bolt square mounting flange.
  • Common OEM Cross-References: 43202-ED305 and 0282-Z12WDR. [1, 2, 3]
Critical Installation Torque Specifications
Proper torque loading is essential to set the exact factory preload on the internal double-row ball bearings. Deviations can result in premature bearing noise or complete structural breakdown. [1, 2, 3]
  • Front Axle Spindle/Hub Nut: 113 Nm to 125 Nm (83 to 92 ft-lbs)
  • Hub-to-Steering Knuckle Bolts (Front): 88.3 Nm (65 ft-lbs)
  • Hub-to-Axle Housing Bolts (Rear): 85 Nm (63 ft-lbs)
  • Wheel Lug Nuts: 108 Nm (80 ft-lbs)

Nissan Ad Wheel Hub Bearing

KSh4,000.00
Y12 Generation (2006–Present) Specifications
Built on the global B-platform (sharing architecture with the Nissan Tiida C11 and Wingroad Y12), this generation uses an integrated third-generation bolt-on assembly: [1, 2, 3]
  • Flange Outer Diameter: 122 mm
  • Spline/Teeth Count (Front Drive Axle): 25 teeth
  • Bolt Pattern (PCD): 4 x 100 mm
  • Total Height/Thickness: 80 mm
  • Inner Flange Diameter: 25 mm
  • Wheel Stud Thread: M12 x 1.25
  • ABS Integration: Magnetic sensor encoder ring built directly into the inner face of the bearing. [1, 2]
Y11 Generation (1999–2008) Specifications
This variant operates on a traditional press-fit system. The hub and bearing are separate components; the bearing must be pressed into the knuckle first, followed by the hub. [1]
  • Bearing Dimensions (Inner x Outer x Width): 38 mm x 76 mm x 40/43 mm (Asymmetrical width variant).
  • Bearing Type: Double-row angular contact ball bearing.
  • Bolt Pattern (PCD): 4 x 114.3 mm or 4 x 100 mm (varies depending on heavy-duty Max load capacity vs. standard DX commercial trims). [1, 2]
Torque Specifications
Applying standard B-platform and Y-chassis engineering values ensures the longevity of the bearing assemblies: [1, 2]
  • Front Axle Spindle Nut: 113 Nm to 125 Nm (83 to 92 ft-lbs)
  • Rear Hub Assembly-to-Axle Bolts (Y12 FWD): 85 Nm (63 ft-lbs)
  • Brake Caliper Bracket Bolts: 98 Nm (72 ft-lbs)
  • Wheel Lug Nuts: 108 Nm (80 ft-lbs) [1]

Nissan Tiida Wheel Hub

KSh4,000.00
The Nissan Tiida (primarily the C11 and C12 generations) utilizes a fully integrated wheel hub and bearing assembly for both the front and rear axles. Because specifications differ significantly depending on the market region (e.g., Japan/Australia vs. Europe/Americas) and ABS configurations, the data is split by standard setups. [1, 2, 3, 4]
Front Wheel Hub Specifications
The front wheel hub houses the internal splines that receive power from the CV axle shaft. [1]
  • Spline/Teeth Quantity: 25 teeth on the input shaft.
  • Bolt Pattern (PCD): Commonly 4 x 114.3 mm (Standard JDM/Global models) or 4 x 100 mm (Select European variants).
  • Flange Outer Diameter: 122 mm to 136 mm (depending on PCD configuration).
  • Hub Pilot Diameter: 80 mm.
  • Mounting Configuration: 3-bolt triangular mounting flange to the steering knuckle.
  • Wheel Stud Thread Size: M12 x 1.25. [1, 2, 3, 4, 5, 6, 7]
Rear Wheel Hub Specifications
The rear hub assembly varies drastically between front-wheel drive (FWD) and all-wheel drive (4WD) e-4WD models. The standard FWD rear assembly includes: [1]
  • Flange Outer Diameter: 134 mm to 148 mm.
  • Center Bore / Wheel Pilot Diameter: 66 mm to 68 mm.
  • Mounting Configuration: 4-bolt square pattern to the rear trailing axle.
  • ABS Integration: Available as standard magnetic encoder ring variants or non-ABS variants. [1, 2, 3]
Critical Torque Specifications
Adhering to correct torque specifications is mandatory during installation to avoid premature wheel bearing failure: [1]
  • Front Wheel Hub Central Axle Nut: 113 Nm (83 ft-lbs)
  • Hub Assembly-to-Knuckle Bolts (Front): 88.3 Nm (65 ft-lbs)
  • Hub Assembly-to-Axle Bolts (Rear): 94.3 Nm (70 ft-lbs)
  • Wheel Lug Nuts: 113 Nm (83 ft-lbs)

Subaru Forester BH5 Front Wheel Hubs

KSh6,500.00
Component Part Numbers & Fitment
  • OEM Wheel Hub Spindle Part Number: 28362AE001, 28362AE000
  • OEM Wheel Bearing Part Number: 28316FE000 (Double-row angular contact ball bearing / tapered roller bearing)
  • OEM Inner Oil Seal (Axle Side): 28015AA070
  • OEM Outer Oil Seal (Wheel Side): 28015AA080
  • Chassis Application: BH5 JDM variants including Brighten, TX, TS-R, and GT-B E-Tune (EJ202, EJ204, and Twin-Turbo EJ208 platforms).
Physical & Dimensional Specifications
  • Wheel Bolt Pattern (PCD): 5 x 100 mm
  • Hub Flange Outer Diameter: 124 mm
  • Wheel Stud Bolt Size: M12 x 1.25
  • Input Shaft Spline Count (Drive Axle Interface): 27 Teeth
  • Bearing Inner Diameter: 42 mm
  • Bearing Outer Diameter: 72 mm
  • Bearing Width: 38 mm (Inner track) / 35 mm (Outer track) [1]
Tightening Torque Specifications
  • Front Axle Center Locknut: 137 ft-lbs (186 N·m) (Note: Always use a new axle nut and peen the locking collar firmly into the axle shaft slot after torquing).
  • Strut-to-Steering Knuckle Clevis Bolts (2x 19mm): 129 ft-lbs (175 N·m) (The upper bolt features an eccentric cam lobe used to set front camber alignment).
  • Lower Ball Joint Pinch Bolt (to Knuckle Base): 37 ft-lbs (50 N·m) [1]
  • Tie Rod End Castle Nut to Knuckle Assembly: 19 ft-lbs (26 N·m) (Tighten up to 22 ft-lbs max only to align cotter pin window).
  • Brake Caliper Torque Bracket-to-Knuckle Bolts: 59 ft-lbs (80 N·m) [1]
  • Front Wheel Lug Nuts: 89 ft-lbs (120 N·m)

Subaru Forester SG5 Front Wheel Hubs

KSh6,500.00
Component Part Numbers & Fitment
  • OEM Wheel Hub Spindle Part Number: 28362AE001, 28362AE000
  • OEM Wheel Bearing Part Number: 28316FE000 (Double-row angular contact ball bearing / tapered roller bearing)
  • OEM Inner Oil Seal (Axle Side): 28015AA070
  • OEM Outer Oil Seal (Wheel Side): 28015AA080
  • Chassis Application: SG5 2.0L N/A (EJ202), 2.0XT Turbo (EJ205), and cross-compatible JDM/Cross Sports variants.
Physical & Dimensional Specifications
  • Wheel Bolt Pattern (PCD): 5 x 100 mm
  • Hub Flange Outer Diameter: 124 mm
  • Wheel Stud Bolt Size: M12 x 1.25
  • Input Shaft Spline Count (Drive Axle Interface): 27 Teeth
  • Bearing Inner Diameter: 42 mm
  • Bearing Outer Diameter: 72 mm
  • Bearing Width: 38 mm (Inner track) / 35 mm (Outer track) [1, 2]
Tightening Torque Specifications
  • Front Axle Spindle Center Locknut: 137 ft-lbs (186 N·m) (Note: Always use a new axle nut and peen the locking collar firmly into the axle shaft slot after torquing).
  • Strut-to-Steering Knuckle Clevis Bolts (2x 19mm): 129 ft-lbs (175 N·m) (The upper bolt features an eccentric cam lobe used to set front camber alignment). [1, 2]
  • Lower Ball Joint Pinch Bolt (to Knuckle Base): 37 ft-lbs (50 N·m) [1, 2]
  • Tie Rod End Castle Nut to Knuckle Assembly: 19 ft-lbs (26 N·m) (Tighten up to 22 ft-lbs max only to align cotter pin window). [1]
  • Brake Caliper Torque Bracket-to-Knuckle Bolts: 59 ft-lbs (80 N·m) [1]
  • Front Wheel Lug Nuts: 89 ft-lbs (120 N·m)[1]

Toyota Markx GRX 130 Front Wheel Hubs

KSh6,500.00
Part Identification & Cross-References
  • OEM Right (Passenger Side) Part Number: 43550-30010, 43550-30011, 43550-30020
  • OEM Left (Driver Side) Part Number: 43560-30010, 43560-30011
  • Aftermarket Substitutes: KOYO 3DACF027F-8BS, FEBEST 0182-XFRH
  • Platform Compatibility: Rear-Wheel Drive (2WD) chassis codes ONLY (GRX130 2.5L and GRX133 3.5L models). (Note: GRX135 4WD models use a different front hub profile to accommodate an outboard CV axle stub shaft).
Physical & Structural Dimensions
  • Assembly Type: Generation 3 Complete Bolt-on Hub Unit (fully sealed double-row angular contact ball bearing pre-assembled to the mounting flange).
  • Wheel Bolt Pattern (PCD): 5 x 114.3 mm (5 x 4.5 inches)
  • Hub Center Bore Diameter: 60.1 mm
  • Flange Outer Diameter: 140 mm
  • Wheel Stud Specification: M12 x 1.5 threaded studs (5 per hub)
  • ABS Integration: Internal magnetic encoder ring built into the inner bearing race dust seal (accessible via a dedicated sensor channel on the steering knuckle frame).
  • Total Component Weight: ~4.90 kg (10.8 lbs)
Tightening Torque Specifications
  • Hub Assembly-to-Steering Knuckle Mounting Bolts (4x): 51 ft-lbs (69 N·m)
  • Brake Caliper Mounting Bracket-to-Knuckle Bolts: 58 ft-lbs (79 N·m)
  • Front Wheel Lug Nuts: 76 ft-lbs (103 N·m)

Toyota Markx GRX 120 Front Wheel Hubs

KSh6,500.00
Part Identification & Interchanges
  • OEM Right (Passenger Side) Part Number: 43550-30010, 43550-30011
  • OEM Left (Driver Side) Part Number: 43560-30010, 43560-30011
  • Alternative Brand Interchanges: KOYO 3DACF027F-8BS, SKF VKBA 6953, FeBest 0182-XFRH
  • Platform Shared Fitments: Toyota Crown (GRS180), Lexus GS300/GS350 (GRS190/GWS191), Lexus IS250/IS350 (GSE20/GSE21) (Note: Specifications listed are strictly for Rear-Wheel Drive (2WD) models). [1, 2, 3]
Physical & Dimensional Specifications
  • Assembly Construction Type: Flanged hub unit with an integrated, sealed double-row angular contact ball bearing assembly
  • Outer Diameter (Flange): 140 mm
  • Wheel Bolt Pattern (PCD): 5 x 114.3 mm (5 x 4.5 inches)
  • Wheel Stud Bolt Thread Pitch: M12 x 1.5
  • Number of Rim Mounting Holes: 5
  • Brake Sensor Integration: Built-in internal magnetic encoder wheel with a dedicated port for the ABS wheel speed sensor wiring harness. [1, 2]
Tightening Torque Specifications
  • Hub Assembly-to-Steering Knuckle Mounting Bolts (4x): 51 ft-lbs (69 N·m)
  • Brake Caliper Mounting Bracket-to-Knuckle Bolts: 58 ft-lbs (79 N·m)
  • Front Wheel Lug Nuts: 76 ft-lbs (103 N·m)

Nissan Xtrail Model NT31 Rear Wheel Hub Bearing

KSh7,000.00
1. Dimensional & Structural Specifications
The NT31 chassis (specifically the 4WD variant) utilizes a complete, integrated wheel hub and bearing assembly (Generation 3 hub unit): [1]
  • Inner Diameter (Spindle Fitment): 26 mm
  • Outer Diameter (Hub Flange): 91 mm (bearing outer diameter) / 147 mm (total flange outer diameter)
  • Total Assembly Height: 94.5 mm
  • Spline/Teeth Count (Drive Axle Entry): 25 teeth (Note: Some aftermarket cross-references measure 24 teeth depending on the exact CV axle manufacturer match, but factory NT31 4WD standard is 25 teeth).
  • Wheel Lug Bolt Pattern: 5 holes / Mounting bores (5 x 114.3 mm Pitch Circle Diameter) [1, 2, 3]
2. OEM Part Numbers & Cross-References
  • Nissan Original Equipment (OE) Codes: 43202-JG200, 43202-JG000, 43202-4BA0B [1, 2]
  • Major Premium Aftermarket Matches:
    • NSK: 53BWKH20
    • SKF: VKBA 3997
    • FAG: 713 6138 10 [1]
3. Material, Sensor & Component Architecture
  • Bearing Construction: Double-row angular contact ball bearing pre-packed with heavy-duty, high-temperature lithium-based grease.
  • ABS Integration: Includes an integrated magnetic encoder ring/tone wheel embedded within the inner oil seal to interface directly with the vehicle’s anti-lock braking system sensor.
  • Sealing: Double-lip rubber contact seals (NBR/Nitrile) on both faces to prevent moisture and road debris contamination.[1]

Toyota Axio 161 Model 2015 Rear Wheel Hubs Bearing

KSh5,000.00
Toyota Corolla Axio NZE161 (2015) Rear Wheel Hub Bearing Technical Specifications
The rear wheel hub assembly for the 2015 Toyota Corolla Axio (Chassis code: NZE161, 2WD Front-Wheel Drive layout) is a complete, unitized Generation 3 modular bolt-on hub assembly. The wheel bearing, mounting flange, and electronic braking system sensors are pre-sealed and integrated into a single non-serviceable cartridge. [1, 2]
1. Core Part Identification & OEM Numbers
  • OEM Part Numbers:
    • 42450-52060 (Primary assembly number)
    • 42450-52061 (Superseded / Updated factory specification)
    • 42410-52060 / 42410-52061 [1]
  • Industry/Aftermarket Reference: PHU2370 / MW-11529 [1, 2]
  • Component Class: Generation 3 Double-Row Ball-Type Hub Unit. [1]
2. Dimensional & Physical Parameters
  • Pitch Circle Diameter (PCD / Lug Pattern): 4 × 100 mm
  • Hub Center Pilot Bore Diameter: 54.1 mm
  • Flange Outer Diameter: 135 mm
  • Internal Bore Diameter (Bearing Inner Diameter): 30 mm
  • Thread Pitch/Size (Wheel Studs): M12 × 1.5
  • Number of Rim Holes / Studs: 4
  • Brake Setup Configuration: Form-fitted to seat flush against standard rear brake drum systems.
  • Weight: Approximately 2.58 kg. [1, 2, 3, 4]
3. Electrical ABS Sensor Integration
  • ABS System Type: Magnetized active wheel speed encoder ring embedded directly into the bearing's inner rubber sealing lip.
  • Signal Mechanism: Tracks vehicle wheel velocity via an external active magnetic sensor bolted to the stationary axle housing. [1, 2]
4. Axle Mounting Mechanics
  • Drive Configuration (NZE161): 2WD/FWD non-driven solid layout. The center bore remains completely smooth with no inner drive splines.
  • Mounting Interface: Anchors to the rear trailing arm stub axle axle carrier flange using a standard 4-bolt backing arrangement (Bolt part numbers: 42421E / 42422A).[1, 2, 3]

Toyota Fielder 161 Model 2015 Rear Wheel Hubs Bearing

KSh5,000.00
Toyota Corolla Fielder NZE161 (2015) Rear Wheel Hub Bearing Technical Specifications
The rear wheel hub assembly for the 2015 Toyota Corolla Fielder (Chassis code: NZE161 / NZE161G, 2WD Front-Wheel Drive platform) is a fully unitized, non-serviceable Generation 3 hub cartridge. The assembly integrates the wheel flange, dual-row pre-loaded bearings, and electronic ABS braking components into a single bolt-on housing.
1. Core Part Identification & OEM Numbers
  • OEM Part Numbers:
    • 42450-52060 (Standard factory production number)
    • 42450-52061 (Superseded/Updated factory spec)
    • 42410-52060 / 42410-52061
  • Industry/Aftermarket Cross-References: PHU2370 / MW-11529 / 512370
  • Assembly Layout: Generation 3 Hub Unit (Integrated inner and outer bearing races with dual structural flanges).
2. Dimensional & Physical Parameters
  • Pitch Circle Diameter (PCD): 4 × 100 mm
  • Hub Center Pilot Bore Diameter: 54.1 mm
  • Flange Outer Diameter: 135.0 mm
  • Wheel Stud Threads: M12 × 1.5
  • Number of Flange Studs/Holes: 4
  • Brake Configuration Interfacing: Engineered exclusively for standard rear drum brake configurations.
  • Inner Hub Configuration: Solid/Smooth center bore housing (No internal splines; exclusive to 2WD/FWD applications).
3. Bearing Internal Design Specs
  • Bearing Construction Type: Double-row, maintenance-free angular contact ball bearing.
  • Lubrication/Seal Dynamics: Factory pre-loaded with premium high-temperature wheel bearing grease; fully enclosed with dual-lip synthetic rubber sealing rings to mitigate debris ingress.
4. Electrical ABS Sensor Integration
  • ABS Technology: Pre-installed magnetic active wheel speed encoder ring embedded directly behind the bearing's internal rubber sealing lip.
  • Signal Mechanism: Reads vehicle speed via an external active magnetic sensor anchored to the stationary axle trailing arm frame.

Toyota Passo B2050 Rear Wheel Hub

KSh5,000.00
Toyota Passo Rear Wheel Hub (B2050 Series) Technical Specifications
The rear wheel hub assembly for the Toyota Passo featuring the B2050 identifier (associated with second and third-generation platforms like the KGC30, NGC30, and M700 series) is a pre-adjusted, unitized Generation 3 wheel hub assembly. It natively integrates the wheel flange, dual-row angular bearings, and electronics into a single bolt-on cartridge. [1]
1. Core Part Identification & OEM Numbers
  • OEM Part Numbers:
    • 42410-B2050 (Primary assembly number)
    • 89411-B2050 (Factory part model reference stamped on the casing) [1, 2, 3]
  • Industry/Aftermarket Cross-References: HUB200T-3 [1]
  • Assembly Layout: Hub Unit Generation 3 (One-piece fully sealed unit with integrated mounting flange and sensor tracking).
2. Dimensional & Physical Parameters
  • Pitch Circle Diameter (PCD): 4 × 100 mm
  • Outer Flange Diameter (Ø): 130.0 mm
  • Hub Assembly Width: 67.0 mm
  • Number of Rim/Wheel Bores: 4 threaded stud positions
  • Brake Setup Compatibility: Built with an integrated rear drum backing face to align squarely inside the vehicle's drum brake layout. [1, 2, 3, 4, 5]
3. Electrical Sensor Integration
  • ABS System Type: Magnetized active wheel speed encoder ring fully enclosed inside the bearing seal.
  • Terminal Interface: 2-Pin (2P) electronic plug connector reading directly off the unit. [1, 2]
4. Axle & Drive Geometry**
  • 2WD / FWD Layout (e.g., KGC30-FF): Non-driven configuration featuring a solid inner bore. It anchors straight to the trailing rear axle assembly using a standard 4-bolt configuration. [1, 2]

Toyota Fielder Model 2014-2018 Rear Wheel Hubs

KSh5,000.00
1. Core Part Identification & OEM Numbers
  • OEM Part Numbers:
    • 42450-52060 (Standard factory spec)
    • 42450-52061 (Superseded/Updated factory spec)
    • 42410-52060 / 42410-52061 [1, 2]
  • Industry/Aftermarket Reference: PHU2370 / MW-11529
  • Assembly Layout: One-piece unitized assembly housing both the hub mechanism and pre-loaded internal bearings. [1]
2. Dimensional & Physical Parameters
  • Pitch Circle Diameter (PCD): 4 × 100 mm
  • Hub Center Pilot Bore: 54.1 mm
  • Flange Outer Diameter: 135.0 mm
  • Wheel Stud Threads: M12 × 1.5
  • Number of Flange Stud Holes: 4
  • Brake Configuration Compatibility: Form-fitted specifically to interface with standard rear drum brake systems. [1, 2, 3]
3. Electrical Sensor Integration
  • ABS Technology: Pre-installed magnetic active encoder ring encased inside the sealed assembly bearing lip.
  • Signal Pickup: Interfaces directly with the axle-mounted external active wheel speed sensor reading off the internal magnetic tracking ring. [1]
4. Axle & Drive Configuration Mechanics
  • 2WD / FWD Variants (NZE161G, NRE161G, ZRE162G, NKE165G): Features a smooth inner bore housing with a flat rear mounting surface. It unbolts directly from the trailing arm axle assembly using 4 backing bolts per side (Bolt OEM Ref: 90105-12350). [1, 2]
  • 4WD Variants (NZE164G): Engineered with an internal female-splined center bore tracking all the way through the hub core to receive the rear CV drive axle shaft spindle and its outer locknut.

Toyota Axio Model 2015-2018 Rear Wheel Hub

KSh5,000.00
Toyota Corolla Axio (2015–2018) Rear Wheel Hub Technical Specifications
The rear wheel hub assembly for the E160 generation Toyota Corolla Axio (chassis codes: NZE161, NRE161, NKE165 [Hybrid], production range 2015–2018) is a completely sealed, unitized hub and bearing mechanism. [1, 2]
1. Core Part Identification & OEM Numbers
  • OEM Part Numbers:
    • 42450-52060
    • 42450-52061 (Updated / Superseded OEM variation)
    • 42410-52060 [1, 2, 3, 4, 5]
  • Industry/Aftermarket Cross-Reference: PHU2370 / MW-11529 [1, 2]
  • Assembly Type: Hub Unit Generation 3 (Integrated double-row angular contact bearing with a integrated mounting flange and ABS wheel speed encoder ring). [1, 2, 3]
2. Dimensional & Physical Parameters
  • Bolt Pattern (PCD): 4 × 100 mm
  • Hub Center Bore Diameter: 54.1 mm
  • Outer Flange Diameter: 135 mm
  • Thread Size (Wheel Studs): M12 × 1.5
  • Number of Flange Splines/Holes: 4 wheel stud holes.
  • Brake Setup Compatibility: Engineered to seat natively with standard rear drum brake systems. [1, 2, 3, 4]
3. Electrical Sensor Integration
  • ABS System Type: Integrated magnetic encoder ring embedded directly inside the pre-sealed bearing casing.
  • Sensor Configuration: Active wheel speed sensor reads directly off the inner magnetic tracking ring. [1, 2]
4. Axle & Drive Type Specifics
  • 2WD / FWD Models (NZE161, NRE161, NKE165): Uses a flat backing-plate surface that mounts directly onto the rear trailing axle carrier via a standard 4-bolt layout. No center drive axle splines inside the hub bore. [1]
  • 4WD Models (NZE164): Features an internal splined center bore passing all the way through the hub to receive the rear CV drive axle shaft spindle.

Toyota Belta Rear Wheel Hubs

KSh5,000.00
1. Core Part Numbers & Identification
  • OEM Part Numbers:
    • 42450-52060 (Standard 2WD models, both Right-Hand and Left-Hand sides)
    • 42410-52060 [1, 2, 3, 4]
  • Industry/Aftermarket Reference: PHU2370 [1]
  • Layout Configuration: One-piece integrated unit (Hub + Bearing + ABS sensor ring). [1, 2]
2. Dimensional & Physical Parameters
  • Bolt Pattern (PCD): 4 × 100 mm
  • Number of Flange Holes / Studs: 4 holes
  • Brake Setup Compatibility: Integrated layout matching standard rear drum brakes.
  • Bearing Type: Double-row maintenance-free angular contact ball bearing (BFC/BWD designation), completely pre-sealed and pre-loaded from the manufacturer.
  • Weight: Approximately 2.09 kg per hub assembly. [1, 2, 3]
3. Fitment Variations By Chassis Type
  • FWD / 2WD Models (KSP92, SCP92): Utilizes standard axle-mounted flange unbolting mechanics via 4 backing bolts per side (Bolt part number: 90105-12350). [1, 2]
  • 4WD Models (NCP96): Features a splined inner bore configuration built to accommodate the rear CV drive shaft axle layout and a locking rear axle shaft spindle nut. [1, 2]

Toyota Vits Rear Wheel Hubs

KSh5,000.00
Hub & Bearing Unit Architecture
  • Component Design Style: Generation 3 (Gen 3) Hub Assembly Unit. The double-row ball bearing, wheel hub flange, inner race, and digital speed sensor form a single, factory-sealed, non-serviceable component.
  • Drive Type Configuration: 2WD / 4x2 standard layouts.
  • Braking Compatibility: Engine-matched for standard drum brake setups (mounts flush behind the rear brake drum backplate).
  • ABS Sensor Integration: Integrated internal magnetic encoder ring with an external plug-in connector terminal molded into the back plate of the hub housing.
Dimensional Specifications
  • Wheel Bolt Pattern / PCD: 4 x 100 mm
  • Number of Hub Wheel Studs: 4 pre-installed M12 x 1.5 studs
  • Hub Center Pilot Diameter (Center Bore): 54.1 mm
  • Axle Beam Mounting Flange: 4-bolt rectangular symmetrical mounting pattern.
Fastener & Torque Specifications
  • Hub Flange Unit-to-Axle Beam Mounting Bolts (4x): 80 Nm (59 ft-lbs) — Note: These fasteners pass through the rear brake backing plate to anchor the assembly directly to the rear torsion axle beam.
  • Wheel Lug Nuts (Road Wheel to Hub Studs): 103 Nm (76 ft-lbs)
  • Maximum Factory Allowable Hub Axle Backlash (End Play): 0.05 mm (0.0020 inch) max

Toyota Fielder 161 Rear Wheel Hubs

KSh5,000.00
Hub & Bearing Unit Architecture
  • Component Design Style: Generation 3 (Gen 3) Modular Hub Assembly Unit. The wheel bearing, hub flange, inner race, and integrated ABS speed sensor are structurally built into a sealed, non-serviceable assembly. [1, 2]
  • Drive Type Configuration: 2WD / 4x2 standard layouts. [1, 2]
  • Braking Integration: Designed primarily for drum brake setups (fits directly behind the rear brake drum sub-assembly). [1, 2]
  • Factory Genuine OEM Part Reference:
    • 42450-52060
    • 42450-52061 [1, 2, 3, 4]
  • ABS System Integration: Integrated internal multi-pole electronic magnetic sensor ring within the hub unit housing. [1]
Dimensional Specifications
  • Wheel Bolt Pattern / PCD: 4 x 100 mm
  • Number of Hub Wheel Studs: 4 pre-installed studs
  • Hub Center Pilot Diameter (Bore): 54.1 mm
  • Mounting Configuration: 4-bolt symmetrical diamond mounting flange on the rear axle beam/carrier. [1, 2, 3, 4, 5]
Fastener & Torque Specifications
  • Rear Hub Bearing Case-to-Axle Beam Bolts (4x): 80 Nm to 90 Nm (59 to 67 ft-lbs)
  • Wheel Lug Nuts (Road Wheel to Flange Studs): 103 Nm (76 ft-lbs)
  • Maximum Factory Allowable Hub Axle Backlash (End Play): 0.05 mm (0.0020 inch) max [1, 2, 3, 4]

Suzuki Wagon R Wheel Hub Bearing

KSh4,000.00
Front Axle Wheel Bearing Specifications
  • Bearing Design Style: Generation 1 (Gen 1) Double-Row Angular Contact Ball Bearing (Sealed, pre-greased, press-in configuration). [1, 2]
  • Core Dimensions (Standard K-Car / MH / Wagon R+ Generations):
    • Inner Diameter (ID): 35.0 mm (Note: Specific older 1.2L Wagon R+ European versions utilize a 42.0 mm ID).
    • Outer Diameter (OD): 61.8 mm (42mm ID variants utilize an 82.0 mm OD).
    • Width / Thickness: 40.0 mm (42mm ID variants utilize a 36.0 mm width). [1, 2]
  • Part Interactivity: Fits symmetric left and right steering knuckles.
  • ABS Integration: Available as standard passive sealed or featuring a built-in magnetic multi-pole ABS encoder ring on the inner seal face, depending on the manufacturing year and trim. [1, 2]
  • Standard Mass / Weight: ~0.43 kg. [1]
Rear Axle Wheel Hub & Bearing Specifications
  • Bearing Design Style: Hub Unit I (Internal double-row setup or integrated wheel hub assembly depending on chassis configuration, e.g., MH21S, MH34S, MH44S). [1, 2]
  • Core Dimensions (Standard Wagon R / Stingray Variations):
    • Inner Diameter (ID): 25.0 mm
    • Outer Diameter (OD): 52.0 mm
    • Width / Thickness: 42.0 mm [1]
  • Wheel Lug Mounting (Flange Type Hubs):
    • Bolt Pattern / PCD: 4 x 100 mm
    • Centering Pilot Diameter: 54.0 mm [1]
  • Total Component Weight: ~0.37 kg [1]
Fastener & Torque Specifications
  • Main Front Axle Center Hub Nut Torque: 175 Nm to 210 Nm (Approx. 129–155 ft-lbs) — Must be torqued to spec while the vehicle is lifted to set the correct non-adjustable internal bearing preload.
  • Rear Axle Hub Nut Torque:
    • For Drum/Spindle Setup: 180 Nm (Approx. 132 ft-lbs)
    • For R+ High-Load Rear Variations: Up to 325 Nm [1]
  • Wheel Lug Nuts (Road Wheel to Hub): 85 Nm to 95 Nm (Approx. 63–70 ft-lbs). [1, 2]
  • Internal Structural Bearing Tolerances: Acceptable factory end play is 0.001 to 0.005 inches (0.025 to 0.127 mm) maximum.

Suzuki Alto Model 2017 Wheel Hub Bearing

KSh4,500.00
Front Wheel Hub Bearing Specifications
  • Bearing Design Architecture: Double-row angular contact ball bearing (Generation 1 cartridge style). [1]
  • Dimensions & Fitment Matrix:
    • Inner Diameter (d): 35.00 mm
    • Outer Diameter (D): 62.00 mm
    • Total Width (W): 40.00 mm [1, 2]
  • Braking Dynamics Integration: Fits models with or without Anti-lock Braking System (ABS) dependent on regional trim variants. [1, 2]
  • Genuine OEM Part Numbers: 43440-58J00, 43401-64L00 (Hub Set), 43401-74P00. [1, 2, 3]
  • Aftermarket Cross-References: SKF (VKBA 3965), SWAG (84 93 1342), SO.HQ 43401-64L00 Set. [1, 2, 3]
Rear Wheel Hub Bearing Specifications
  • Bearing Design Architecture: Single-row or integrated double-row tapered/ball configurations depending on 2WD vs. 4WD layouts. [1, 2]
  • Dimensions & Fitment Matrix (Standard 2WD):
    • Inner Diameter: 25.00 mm
    • Outer Diameter: 52.00 mm
    • Total Width: 42.00 mm [1]
  • Genuine OEM Part Numbers: PW25520042CS. [1]
  • Aftermarket Cross-References: RIDEX (654W0474), FEBI BILSTEIN (31341). [1]
Material & Metallurgical Composition
  • Core Material Element: High-cleanliness, induction-hardened chromium steel (Gcr15 structural grade) ensuring wear thresholds against load cycles. [1]
  • Internal Seal Matrix: Nitrile butadiene rubber (NBR) multi-lip dual-shield system preventing abrasive dirt intrusion and moisture breakdown. [1]
  • Lubrication Element: Factory-packed with premium lithium-complex high-temperature grease.

Suzuki Wagon R Wheel Hub Bearing

KSh4,500.00
Front Wheel Hub & Bearing Specifications (Press-In Split Type)
  • Bearing Style: Generation 1 Press-In Sealed Double-Row Angular Contact Ball Bearing. The standalone driven hub flange presses into the steering knuckle-seated bearing.
  • Integrated Sensor Technology: Features an integrated magnetic multi-pole ABS encoder ring built directly into the inner rubber oil seal face on one side of the bearing.
  • Axle Location: Front Axle (Symmetric Left / Right configuration).
  • Front Bearing Core Dimensions: Inner Diameter: 35.0 mm | Outer Diameter: 64.0 mm | Width / Thickness: 37.0 mm.
  • Wheel Lug Pattern Configuration: 4 Holes.
  • Pitch Circle Diameter (PCD): 4 x 100 mm.
  • Centering / Hub Pilot Outer Diameter: 54.0 mm.
  • Internal Drive Splines: 23 Internal Teeth (interfacing with the outer CV joint axle stub).
  • Suzuki Genuine Factory OEM Part Numbers: 43440-58J00, 43440-78A20, 43440-84F00.
  • Major Aftermarket Cross-References: NSK 35BWD24, GMB GH30330, Koyo DAC35640037.
Rear Wheel Hub & Bearing Unit Specifications (2WD Models)
  • Design Configuration: Built directly into the Rear Brake Drum assembly (Generation 1 sealed press-in bearing integrated inside the brake drum center cavity, spinning on a non-driven spindle shaft stud).
  • Axle Position: Rear Axle (Symmetric Left / Right mounting geometry).
  • Wheel Lug Arrangement: 4 Holes.
  • Rear Pitch Circle Diameter (PCD): 4 x 100 mm.
  • Rear Bearing Core Dimensions: Inner Diameter: 25.0 mm | Outer Diameter: 52.0 mm | Width / Thickness: 43.0 mm.
  • Material Composition: Forged grey alloy iron drum base matching induction-hardened GCr15 High-Carbon Chromium Bearing Steel internals.
  • Suzuki Genuine Factory OEM Part Numbers (Rear): 46860-76G00, 46860-76G04, 46860-60G00.
  • Major Aftermarket Cross-References (Rear): NSK 25BWD01, Koyo DAC25520043, Febest DAC25520043-KIT.

Passo 2015 Wheel Hub

KSh4,500.00
Front Wheel Hub & Bearing Specifications (3rd Gen / KGC30 & NGC30 Series)
  • Bearing Style: Generation 1 Press-In Sealed Double-Row Angular Contact Ball Bearing. The standalone driven hub spindle flange presses directly into the front steering knuckle bearing.
  • Integrated Sensor Technology: Features a magnetic multi-pole ABS encoder ring built directly into one side of the inner oil seal face.
  • Axle Location: Front Axle (Symmetric Left / Right configuration).
  • Front Bearing Core Dimensions: Inner Diameter: 38.0 mm | Outer Diameter: 70.0 mm | Width / Thickness: 37.0 mm.
  • Wheel Lug Pattern Configuration: 4 Holes.
  • Pitch Circle Diameter (PCD): 4 x 100 mm.
  • Centering / Hub Pilot Outer Diameter: 54.0 mm.
  • Internal Drive Splines: 24 Internal Teeth on the hub center (interfacing with the outer CV joint axle stub).
  • Genuine Toyota/Daihatsu OEM Part Numbers: 43560-B1010, 43550-B1010 (Hub bearing assembly unit), 43510-B1011 (Hub axle component).
  • Major Aftermarket Cross-References: NSK 38BWD26, GMB GH32560, Koyo DAC38700037, Febest DAC38700037M-KIT.
Rear Wheel Hub & Bearing Unit Specifications (2WD Models)
  • Design Configuration: Generation 3 Modular, Unitized Bolt-On Rear Hub Assembly. The wheel hub flange, dual-row inner tracks, outer casing, and magnetic ABS target mechanics are integrated into a single, non-serviceable sealed module.
  • Axle Position: Rear Axle (Symmetric Left / Right mounting geometry).
  • Wheel Lug Arrangement: 4 Holes.
  • Rear Pitch Circle Diameter (PCD): 4 x 100 mm.
  • Centering / Brake Drum Pilot Diameter: 54.0 mm.
  • Mounting Flange Layout: 4-Bolt Rectangular Pattern matching to the rear trailing arm axle plate.
  • ABS Signal Integration: Pre-assembled internal multi-pole magnetic target track enclosed within the spindle sealing cap face.
  • Material Composition: Precision induction-hardened GCr15 High-Carbon Chromium Bearing Steel internals matched with a 55# structural forged steel hub casing.
  • Genuine Toyota/Daihatsu OEM Part Numbers (Rear): 42450-B1020, 42410-B1020.
  • Major Aftermarket Cross-References (Rear): GMB GH32630, Koyo 3DACF026F-23HS-AM, FAG 713621210.

Daihatsu Mira Wheel Hub

KSh4,000.00
Front Wheel Hub & Bearing Specifications (Modern JDM Layout / L275 & LA300 Series)
  • Bearing Style: Generation 1 Press-In Sealed Double-Row Angular Contact Ball Bearing. The standalone driven hub flange presses into the steering knuckle-seated bearing.
  • Integrated Sensor Technology: Features a magnetic multi-pole ABS encoder ring built directly into the rubber oil seal face on one side of the bearing.
  • Axle Location: Front Axle (Symmetric Left / Right configuration).
  • Front Bearing Core Dimensions: Inner Diameter: 35.0 mm | Outer Diameter: 64.0 mm | Width / Thickness: 37.0 mm.
  • Wheel Lug Pattern Configuration: 4 Holes.
  • Pitch Circle Diameter (PCD): 4 x 100 mm (Modern series standard, replacing the legacy 4x110 mm vintage configurations).
  • Centering / Hub Pilot Outer Diameter: 54.0 mm.
  • Genuine Daihatsu Genuine OEM Part Numbers: 43560-B2020, 43560-B2021, 43560-B2030.
  • Major Aftermarket Cross-References: DAC35640037M (Industry Standard Blueprint), FEBI 172477, GSP 9400087. [1, 2, 3, 4, 5, 6]
Rear Wheel Hub & Bearing Unit Specifications (2WD Models)
  • Design Configuration: Generation 3 Modular, Unitized Bolt-On Rear Hub Assembly. The wheel hub flange, dual-row inner ball tracks, outer casing, and ABS target mechanics are integrated into a single, non-serviceable sealed module.
  • Axle Position: Rear Axle (Symmetric Left / Right mounting geometry).
  • Wheel Lug Arrangement: 4 Holes.
  • Rear Pitch Circle Diameter (PCD): 4 x 100 mm.
  • Mounting Flange Layout: 4-Bolt Rectangular Pattern matching to the rear trailing arm/torsion beam drop axle base.
  • Mounting Bore Distance: 72.0 mm.
  • ABS Signal Integration: Pre-assembled active ABS sensor ring or multi-pole target track containing a 96-magnetic-pole layout.
  • Material Composition: Precision induction-hardened GCr15 High-Carbon Chromium Bearing Steel internals matched with a 55# structural forged steel hub casing.
  • Genuine Daihatsu OEM Part Roots: 42450-B2010, 42450-B2050, 42450-B2060. [1, 2, 3, 4, 5]

Mitsubishi Mirage Wheel Hub

KSh5,000.00
Front Wheel Hub & Bearing Specifications (6th Generation / LA Chassis)
  • Bearing Style: Generation 1 Press-In Sealed Double-Row Angular Contact Ball Bearing. The bearing presses directly into the front steering knuckle, and the standalone driven hub spindle flange presses into the bearing's inner race.
  • Integrated Sensor Technology: Features a magnetic ABS sensor encoder ring integrated directly into the rubber oil seal face on one side of the bearing.
  • Axle Location: Front Axle (Symmetric Left / Right configuration).
  • Outer Hub Flange Diameter: 120.0 mm.
  • Wheel Lug Pattern Configuration: 4 Holes.
  • Pitch Circle Diameter (PCD): 4 x 100 mm.
  • Centering / Hub Pilot Outer Diameter: 56.0 mm.
  • Internal Drive Splines: 25 Internal Teeth on the hub center (interfacing with the outer CV joint axle stub).
  • Front Bearing Core Dimensions: Inner Diameter: 38.0 mm | Outer Diameter: 70.0 mm | Width / Thickness: 37.0 mm.
  • Genuine Mitsubishi OEM Part Numbers: 3880A024 (Front Bearing), 3885A017 / 3885A040 (Front Hub Flange Spindle).
  • Major Aftermarket Cross-References: NSK 38BWD26, GMB GH32710, Febest DAC38700037-KIT.
Rear Wheel Hub & Bearing Unit Specifications (2WD Models)
  • Design Configuration: Generation 3 Modular, Unitized Bolt-On Rear Hub Assembly. The wheel hub, dual-row bearing tracks, outer flange, and ABS tone ring are pre-assembled into a single, non-serviceable sealed unit that bolts straight to the rear trailing arm axle beam.
  • Axle Position: Rear Axle (Symmetric Left / Right mounting geometry).
  • Wheel Lug Arrangement: 4 Holes.
  • Rear Pitch Circle Diameter (PCD): 4 x 100 mm.
  • Centering / Brake Drum Pilot Diameter: 56.0 mm.
  • Mounting Flange Configuration: 4-Bolt Trapezoidal Pattern mounting to the rear axle.
  • ABS Target Integration: Internal magnetic multi-pole tone ring enclosed within the spindle sealing cap face.
  • Material Composition: Induction-hardened GCr15 High-Carbon Chromium Bearing Steel internals matched with a 55# structural forged steel outer hub casing.
  • Genuine Mitsubishi OEM Part Numbers (Rear): 3785A015, 3785A035.
  • Major Aftermarket Cross-References (Rear): GMB GH33120, NTN HUB319T-1, FAG 713619930.

Suzuki Alto 2015 Wheel Hub

KSh4,000.00
Front Wheel Hub & Bearing Specifications (7th Generation / HA36 Series)
  • Design Layout: Combined Generation 1 Press-In double-row angular contact sealed ball bearing pressed into a standalone forged hub flange.
  • Integrated Sensor Technology: Features a magnetic ABS sensor encoder ring built directly into the inner oil seal face (must be pressed in facing inward toward the knuckles).
  • Axle Location: Front Axle (Left / Right symmetric configuration).
  • Outer Hub Flange Diameter: 114.0 mm.
  • Wheel Lug Pattern Configuration: 4 Holes.
  • Pitch Circle Diameter (PCD): 4 x 100 mm.
  • Centering / Hub Pilot Outer Diameter: 54.0 mm.
  • Internal Drive Splines: 23 Internal Teeth (on standard 2WD HA36S variants) or 24 Internal Teeth (on specialized 4WD or Turbo RS/Worko HA36S variants).
  • Genuine Suzuki OEM Numbers: 43401-74P00, 43401-74P01, 43401-50M00 (Bearing kit: 43440-50M00, 43440-74P00).
  • Major Aftermarket Cross-References: NSK 35BWD28, GMB GH33030, JIKIU HW22026.
Rear Wheel Hub & Bearing Specifications (Integrated Rear Drum Layout)
  • Design Configuration: Built directly into the Rear Brake Drum assembly (Generation 1 sealed press-in bearing integrated directly inside the brake drum cavity, turning on a non-driven spindle shaft).
  • Axle Position: Rear Axle (Symmetric Left / Right mounting geometry).
  • Wheel Lug Arrangement: 4 Holes.
  • Rear Pitch Circle Diameter (PCD): 4 x 100 mm.
  • Inner Hub Bearing Bore Steps: Inner Diameter: 25.0 mm | Outer Diameter: 52.0 mm | Height/Thickness: 43.0 mm.
  • Material Composition: Forged grey alloy iron drum base matching induction-hardened GCr15 High-Carbon Chromium Bearing Steel internals.
  • Genuine Suzuki OEM Numbers (Rear): 43511-74P00, 43511-50M10, 43511-68K00 (Bearing component: 46860-50M00).
  • Major Aftermarket Cross-References (Rear): Koyo DAC25520043, Febest DAC25520043-KIT.

Honda fit, Honda insight, Honda fit shuttle Wheel Hub Bearing

KSh5,000.00
Front Wheel Bearing Specifications (Press-In Sealed Type)
The front axle uses a Generation 1 sealed double-row angular contact ball bearing that must be pressed into the front steering knuckle assembly. [1, 2]
    • Inner Diameter (ID): 43 mm
    • Outer Diameter (OD): 79 mm
    • Inner Ring Width: 41 mm
    • Outer Ring Width: 38 mm
    • ABS Integration: Features an integrated 96-magnetic-pole ABS encoder ring built directly into one side of the inner oil seal face (the bearing must be pressed in with this magnetic side facing inward toward the sensor).
    • Honda Factory Genuine OEM Part Numbers: 44300-TF0-951, 44300-SCC-003, 44300-SEY-008, 44300-T5A-951.
    • Major Aftermarket Cross-References: NSK 43BWD14, Febest DAC43793841M, SKF FW36. [1, 2, 3, 4, 5]
Rear Wheel Hub Bearing Unit Specifications (2WD Models)
For standard Front-Wheel Drive (2WD) models, the rear bearing is built into a non-serviceable, sealed Generation 3 complete modular bolt-on hub assembly that slides over a spindle stub axle and is secured by a single central axle nut. [1, 2]
    • Wheel Stud Quantity: 4 Studs
    • Pitch Circle Diameter (PCD / Lug Bolt Pattern): 4 x 100 mm
    • Flange Outer Diameter: 151.8 mm
    • Brake Pilot / Center Bore Diameter: 56.1 mm
    • Wheel Pilot Diameter: 51.0 mm
    • ABS Integration: Includes a pre-assembled, internal multi-pole magnetic ABS tone wheel tracking layout integrated on the spindle-facing side.
    • Honda Factory Genuine OEM Part Numbers: 42200-TF0-Z51, 42200-TF6-951, 42200-TG0-T51.
    • Major Aftermarket Cross-References: PFI PHU2323, Industry Standard Ref 512323. [1, 2, 3, 4, 5, 6]
Material Composition & Structural Tolerances
  • Steel Grade: Precision-hardened GCr15 High-Carbon Chromium Bearing Steel used across inner/outer structural tracks and internal rolling elements for high heat dissipation and fatigue resistance.
  • Flange Hardness: 55# structural forged medium-carbon steel base casing to withstand extreme cornering shear loads.
  • Lubrication: Pre-packed, life-lubricated high-performance polyurea synthetic grease optimized for operating ranges from -20°C to 120°C.

Mazda Premacy 4WD Wheel Hub Bearing

KSh7,000.00
Front Wheel Bearing Specifications (Press-In Angular Contact Type)
  • Inner Diameter (ID): 42 mm (Standard on later iterations like CR/CW chassis) or 40 mm (Early CP chassis iterations).
  • Outer Diameter (OD): 80 mm (Later models) / 74 mm (Early CP models).
  • Width / Thickness: 45 mm (Later models) / 40 mm (Early CP models).
  • Bearing Construction: Double-row sealed angular contact ball bearing.
  • ABS Integration: Features a magnetic multi-pole ABS encoder ring built directly into the integrated inner oil seal rubber lip face.
  • Front Spline Layout: 31 Internal Hub Spline Teeth interfacing with the outer CV joint shaft axle stub. [1, 2, 3, 4]
Rear Wheel Hub & Bearing Specifications (4WD / AWD Assembly)
  • Design Configuration: Generation 3 modular, complete bolt-on rear wheel hub assembly unit. Unlike 2WD variants, the 4WD version features a hollow splined center to accept a rear drive shaft. [1]
  • Axle Position: Rear Axle (Symmetric Left / Right mounting geometry). [1]
  • Flange Outer Diameter: 140 mm. [1]
  • Wheel Lug Pattern Pattern: 5 Holes. [1]
  • Pitch Circle Diameter (PCD): 5 x 114.3 mm (Standard Mazda medium-wagon layout).
  • ABS Sensor Profile: 44 Teeth passive tone wheel window or specialized integrated internal magnetic pole ring depending on chassis year (CP vs. CWEAW). [1, 2]
  • Material Composition: Forged 55# structural steel housing flanges structurally mated with precision induction-hardened GCr15 high-carbon chromium bearing steel tracks.
Factory Reference & Cross-Identification Numbers
  • Mazda Genuine OEM Numbers: BP4K-26-15XA, BBN7-26-15X (Later 4WD rear hubs), C100-26-151 (Early 4WD rear hubs).
  • Major Aftermarket Cross-Reference Cataloging:
    • Koyo Manufacturer Reference: 3DACF038D-5D.
    • NTN / Japan Reference: AU0838-5LXL (Front Bearing).
    • SKF Hub Kit Reference: VKBA 3932. [1, 2, 3]

Mazda Demio 2017 Wheel Hub Bearing

KSh7,000.00
Front Wheel Hub & Bearing Specifications (Gen 4 / DJ Chassis)
    • Bearing Style: Press-In Generation 1 Generation/Design Sealed Angular Contact Double-Row Ball Bearing.
    • Integrated Sensor Technology: Features a magnetic ABS sensor encoder ring built directly into the inner oil seal face.
    • Axle Location: Front Axle (Left / Right symmetric configuration).
    • Outer Hub Flange Diameter: 122.0 mm to 122.8 mm.
    • Wheel Lug Pattern Configuration: 4 Holes.
    • Pitch Circle Diameter (PCD): 4 x 100 mm.
    • Genuine Mazda OEM Numbers: D09H-33-04XA, DA7H-33-04XA.
    • Major Aftermarket Cross-Reference Cataloging: FAG 713 6280 40, OPTIMAL 942108, ESEN SKV 29SKV431. [1, 2, 3, 4, 5, 6]
Rear Wheel Hub Bearing Unit Specifications
  • Chassis Configurations:
      • 2WD (Front-Wheel Drive): Uses a Generation 3 complete, bolt-on rear hub assembly unit with a built-in magnetic ABS target sensor ring.
      • 4WD / AWD: Heavy-duty modular bolt-on hub assembly unit optimized for independent rear differential load distributions. [1, 2, 3]
  • 2WD Wheel Lug Arrangement: 4 Holes. [1]
  • Rear Hub Pitch Circle Diameter (PCD): 4 x 100 mm. [1]
  • ABS Sensor Profile: 88 Teeth / Magnetic Pole Lines embedded inside the rear dust-shield interface. [1]
  • Material Composition: High-grade GCr15 High-Carbon Chromium Bearing Steel (hardened internal races and rolling ball tracks) enclosed by 55# structural forged steel casing components.
  • Rear Hub Aftermarket Cross-References: MEYLE 714 752 0003, ABAKUS 132-02-044.

Mazda Verisa Wheel Hub Bearing

KSh4,500.00
Front Wheel Bearing Specifications (Press-In Sealed Type)
  • Inner Diameter (ID): 39 mm
  • Outer Diameter (OD): 72 mm
  • Width / Thickness: 37 mm
  • Bearing Type: Sealed Angular Contact Double-Row Ball Bearing (Press-in style).
  • Axle Location: Front Axle (Left / Right symmetric).
  • Genuine Mazda OEM Numbers: D350-33-047A, D350-33-047B, D351-33-047A, D351-33-047B, D651-33-047A, D651-33-047B.
  • Aftermarket Cross-Reference: Febest DAC39720037M, NTN/SNR AU0847-6LX3L/L588. [1, 2, 3, 4]
Rear Wheel Bearing Specifications (4WD Hub Unit / 2WD Integrated Hub)
  • Chassis Configurations:
    • 2WD (Front-Wheel Drive): Uses a standalone press-in bearing or an integrated rear hub assembly.
    • 4WD (All-Wheel Drive): Uses a complete, bolt-on third-generation wheel hub assembly unit. [1, 2, 3]
  • 2WD Rear Bearing Dimensions: Inner: 29 mm | Outer: 53 mm | Thickness: 37 mm. [1]
  • 4WD Rear Hub Splines: 24 Internal Spline Teeth. [1]
  • Material Composition: GCr15 High-Carbon Chromium Bearing Steel (Rings, Balls, and Rollers) with 55# structural steel hub flanges. [1]
  • Genuine Mazda OEM Numbers (Rear): D350-26-151A, D350-26-151B, D350-26-151C (2WD) | D471-26-15X, D471-26-15XA (4WD). [1, 2]
  • Aftermarket Cross-Reference (Rear): Febest DAC29530037, PFI PW29530037CSHDM. [1, 2]

Subaru Legacy BP Rear Wheel Hub

Original price was: KSh9,000.00.Current price is: KSh8,000.00.

Upgrade your vehicle's handling and eliminate disruptive road noise with this high-durability Rear Wheel Hub for the Subaru Legacy BP. Sourced as a genuine Ex-Japan part, it is engineered to withstand the specific stresses of the Symmetrical All-Wheel Drive system, ensuring smooth rotation and maximum safety.

PRICE: KSh 8,000

COMPATIBILITY: Precision-engineered specifically for the Subaru Legacy BP series (2003–2009).

Showing 28 of 99 results
Please select your product
Product has been added to your cart
Compare (0)