Subaru Forester SG5 Front Wheel Hubs

(0 Reviews) Write a review
Component Part Numbers & Fitment

  • OEM Wheel Hub Spindle Part Number: 28362AE001, 28362AE000
  • OEM Wheel Bearing Part Number: 28316FE000 (Double-row angular contact ball bearing / tapered roller bearing)
  • OEM Inner Oil Seal (Axle Side): 28015AA070
  • OEM Outer Oil Seal (Wheel Side): 28015AA080
  • Chassis Application: SG5 2.0L N/A (EJ202), 2.0XT Turbo (EJ205), and cross-compatible JDM/Cross Sports variants.
Physical & Dimensional Specifications

  • Wheel Bolt Pattern (PCD): 5 x 100 mm
  • Hub Flange Outer Diameter: 124 mm
  • Wheel Stud Bolt Size: M12 x 1.25
  • Input Shaft Spline Count (Drive Axle Interface): 27 Teeth
  • Bearing Inner Diameter: 42 mm
  • Bearing Outer Diameter: 72 mm
  • Bearing Width: 38 mm (Inner track) / 35 mm (Outer track) [1, 2]
Tightening Torque Specifications

  • Front Axle Spindle Center Locknut: 137 ft-lbs (186 N·m) (Note: Always use a new axle nut and peen the locking collar firmly into the axle shaft slot after torquing).
  • Strut-to-Steering Knuckle Clevis Bolts (2x 19mm): 129 ft-lbs (175 N·m) (The upper bolt features an eccentric cam lobe used to set front camber alignment). [1, 2]
  • Lower Ball Joint Pinch Bolt (to Knuckle Base): 37 ft-lbs (50 N·m) [1, 2]
  • Tie Rod End Castle Nut to Knuckle Assembly: 19 ft-lbs (26 N·m) (Tighten up to 22 ft-lbs max only to align cotter pin window). [1]
  • Brake Caliper Torque Bracket-to-Knuckle Bolts: 59 ft-lbs (80 N·m) [1]
  • Front Wheel Lug Nuts: 89 ft-lbs (120 N·m)[1]

KSh6,500.00

In stock
Buy now

Description

Product Overview

The Front Wheel Hub Assembly is a heavy-duty, load-bearing rotational component engineered specifically for Subaru’s symmetrical All-Wheel Drive (AWD) platform. Factory-integrated with a precision-sealed rolling-element bearing and a multi-bolt mounting flange, this assembly supports the vehicle’s front-end weight while ensuring the front wheels rotate smoothly, quietly, and reliably under the demanding torque and traction loads typical of Subaru’s turbo and non-turbo crossover variants.

Key Technical Specifications

(Standard specifications for Subaru Forester SG5 front wheel hubs):

  • Fitting Position: Front Axle (Interchangeable Left [Passenger] Side and Right [Driver] Side)

  • Compatibility: Fits all Subaru Forester SG5 models (2002–2008, including 2.0L EJ20 naturally aspirated and 2.0L turbocharged EJ205/EJ20X variants, manual [MT] and automatic [AT] transmissions).

  • Design Type: Complete bolt-on sealed hub-and-bearing unit featuring a sturdy mounting flange, pre-pressed high-tensile wheel studs, and provisions for the anti-lock braking system (ABS) tone ring/sensor.

Material & Build Quality

  • Bearing Steel: Forged from high-grade alloy bearing steel with induction-hardened raceways designed to endure continuous vertical loads, high-speed rotation, and extreme lateral cornering forces.

  • Sealing Technology: Equipped with heavy-duty multi-lip rubber seals designed to permanently lock in high-temperature wheel bearing grease while locking out water, mud, road salt, and abrasive grit common in all-weather and off-road driving.

  • Stud Integrity: Fitted with precision-threaded, high-tensile steel wheel studs engineered to safely withstand high torque clamping loads for factory and aftermarket alloy wheels.

OEM & Cross-Reference Part Numbers

  • Subaru OEM Reference Numbers:

    • 28373FE000, 28373-FE001 (or platform-specific regional variants)

  • Popular Aftermarket Brands: Koyo, NTN, NSK, GSP, Febest, and NTY.

Function & Importance

  1. Load Support: Safely bears the front-end mass of the vehicle while transmitting engine torque, traction forces, and dynamic braking loads into the front suspension knuckle.

  2. Low-Friction Rotation: Enables the front wheels to spin freely and efficiently with minimal mechanical resistance.

  3. Sensor Integration: Maintains precise air-gap spacing for the wheel speed sensor, ensuring accurate inputs for the ABS and vehicle dynamics systems.

Common Signs of a Failing Front Wheel Hub/Bearing on an SG5 Forester

When internal bearing components pit, wear out, or lose their protective seal due to age, mileage, or off-road exposure, your Forester will typically exhibit these warning signs:

  • Whirring, Humming, or Roaring Noise: A continuous mechanical growl from the front end that intensifies as vehicle speed increases, often changing pitch when weaving or turning the steering wheel (loading/unloading the bearing).

  • Steering Wheel Vibration: A noticeable tremor or shimmy felt through the steering wheel while cruising at highway speeds.

  • Dashboard Warning Lights: ABS malfunction lights triggered if internal bearing play interferes with the wheel speed sensor signal.

  • Wheel Play: Noticeable looseness or wobble when gripping the front tire at the 12-and-6 o’clock positions while the vehicle is lifted securely off the ground.

Reviews

There are no reviews yet.

Be the first to review “Subaru Forester SG5 Front Wheel Hubs”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)