Nissan Ad Wheel Hub Bearing

(0 Reviews) Write a review
Y12 Generation (2006–Present) Specifications

Built on the global B-platform (sharing architecture with the Nissan Tiida C11 and Wingroad Y12), this generation uses an integrated third-generation bolt-on assembly: [1, 2, 3]
  • Flange Outer Diameter: 122 mm
  • Spline/Teeth Count (Front Drive Axle): 25 teeth
  • Bolt Pattern (PCD): 4 x 100 mm
  • Total Height/Thickness: 80 mm
  • Inner Flange Diameter: 25 mm
  • Wheel Stud Thread: M12 x 1.25
  • ABS Integration: Magnetic sensor encoder ring built directly into the inner face of the bearing. [1, 2]
Y11 Generation (1999–2008) Specifications

This variant operates on a traditional press-fit system. The hub and bearing are separate components; the bearing must be pressed into the knuckle first, followed by the hub. [1]
  • Bearing Dimensions (Inner x Outer x Width): 38 mm x 76 mm x 40/43 mm (Asymmetrical width variant).
  • Bearing Type: Double-row angular contact ball bearing.
  • Bolt Pattern (PCD): 4 x 114.3 mm or 4 x 100 mm (varies depending on heavy-duty Max load capacity vs. standard DX commercial trims). [1, 2]
Torque Specifications

Applying standard B-platform and Y-chassis engineering values ensures the longevity of the bearing assemblies: [1, 2]
  • Front Axle Spindle Nut: 113 Nm to 125 Nm (83 to 92 ft-lbs)
  • Rear Hub Assembly-to-Axle Bolts (Y12 FWD): 85 Nm (63 ft-lbs)
  • Brake Caliper Bracket Bolts: 98 Nm (72 ft-lbs)
  • Wheel Lug Nuts: 108 Nm (80 ft-lbs) [1]

KSh4,000.00

In stock
Buy now

Description

The Nissan AD Wheel Hub Bearing (often sharing platform components with the Nissan Wingroad) is a critical assembly that supports the vehicle’s weight, houses the wheel mounting studs, and allows the wheels to rotate freely with minimum friction.

1. General Product Description

  • Part Type: Wheel Hub Assembly / Wheel Bearing Unit

  • Application: Nissan AD Van / Wagon (spanning generations including Y10, Y11, Y12, and later models widely utilized as commercial utility vehicles).

  • Axle Placement:

    • Front: Typically consists of a heavy-duty pressed-in double-row ball or roller bearing unit where the drive axle shaft passes through the center spline.

    • Rear: Depending on whether the vehicle is 2WD or 4WD/AWD, the rear layout utilizes either a sealed bolt-on hub assembly (common on 2WD beam axles) or a specialized trailing-arm bearing setup.

  • ABS Integration: Most modern variants feature an integrated magnetic encoder seal for the Anti-lock Braking System (ABS).

2. Key Specifications & Physical Characteristics

  • Construction: High-strength, heat-treated forged steel alloy built to withstand heavy daily cargo loads and rough road conditions.

  • Design Type: Pre-sealed, maintenance-free unitized bearings designed to prevent internal contamination from water, dust, and mud.

  • Flange & Studs: Engineered with a specific PCD (Pitch Circle Diameter) bolt pattern—commonly a 4-stud configuration (such as 4×100) tailored for compact commercial Nissan platforms.

  • Common OEM Cross-References: Frequently cross-referenced with parts built for sister models like the Nissan Wingroad, Latio, and Sunny (e.g., OEM part numbers matching series like 43202-... for rear hubs or specific dimensional press-fit bearings for the front).

3. Common Signs of a Failing Wheel Hub Bearing

  • Humming or Roaring Noise: A constant, escalating drone or growling sound from the front or rear wheels that intensifies as the vehicle speeds up.

  • Vibration: Steering wheel feedback or general cabin vibration while driving at cruising speeds.

  • Loose Handling: Wandering or loose steering response when cornering under load.

  • ABS Malfunction: Damage to the integrated sensor ring can trigger unexpected ABS activation or illuminate the dashboard warning light.

Reviews

There are no reviews yet.

Be the first to review “Nissan Ad Wheel Hub Bearing”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)