Description
Product Description: Honda Fit / Jazz (GE6 / GE8 Chassis, 2007–2014 / 2012 Model Year) Engine & Transmission Mounting Kit (3-Piece / 4-Piece Set)
Overview
The Engine & Transmission Mounting Kit for the 2012 Honda Fit / Jazz (GE6 1.3L L13A / L13Z, GE8 1.5L L15A / L15Z, and GP1 1.3L LDA-MF6 Hybrid, 2nd Generation 2007–2014 with Automatic, CVT, and 5-Speed Manual Transmissions) is a complete replacement set engineered to stabilize the powertrain, eliminate deep cabin vibrations, and preserve smooth gear shifting. Designed to isolate dynamic combustion shocks and transmission torque from Honda’s lightweight unibody frame, this kit replaces hardened, cracked, or fluid-leaking factory mounts to restore factory-smooth idling and sharp acceleration response.
Technical Specifications & Characteristics
-
Vehicle Compatibility: 2012 Honda Fit / Honda Jazz (GE6 1.3L, GE7 1.3L 4WD, GE8 1.5L, GE9 1.5L 4WD, and GP1 Hybrid, 2nd Gen 2007–2014)
-
Powertrain Compatibility: 1.3L i-VTEC (L13A), 1.5L i-VTEC (L15A), and 1.3L IMA Hybrid (LDA) engines paired with Continuously Variable Transmission (CVT), 5-Speed Torque-Converter Automatic, or 5-Speed Manual.
-
Set Composition:
-
Right-Hand (RH / Engine Side) Hydraulic Mount: Positioned on the engine timing cover side; supports primary engine weight and features an internal oil-filled hydraulic chamber to dampen vertical engine vibrations.
-
Left-Hand (LH / Transmission Side) Mount: Positioned under the air filter intake box and battery tray area; secures the gearbox casing to the left chassis frame rail.
-
Rear (Lower Torque Rod / Pitch Suppressor) Mount: Positioned underneath between the front subframe crossmember and transmission bellhousing; controls fore-aft engine rocking during throttle acceleration and hard braking.
-
-
Material Construction: Lightweight cast aluminum alloy housings, stamped high-tensile steel mounting brackets, high-durometer Natural Rubber (NR) compounds, and sealed hydraulic fluid dampening chambers.
-
Fitment Type: Direct factory bolt-on fitment using original subframe and unibody frame mounting locations.
Key Features & Performance Benefits
-
Eliminates Dashboard Shudder & Steering Wheel Vibration: Absorbs low-frequency engine rumbles, stopping steering wheel buzz, dashboard rattling, and cabin shudder when idling in ‘D’ or stopped at traffic lights.
-
Smooths Throttle Engagement & Gear Shifts: Prevents engine and gearbox tilt under load, eliminating heavy thumps, drivetrain lurching, or manual gear lever movement during acceleration.
-
Protects CV Axles & Exhaust Plumbing: Holds the powertrain in precise factory alignment, protecting inner CV axle joints, boot seals, and exhaust flex pipes from excessive mechanical twisting stress.
-
Hydraulic Vibration Dampening: Features an OEM-spec hydraulic fluid chamber inside the primary upper right mount to absorb severe road impacts and high-frequency engine harmonics before they enter the unibody frame.
Variant & Fitment Notes (1.3L GE6 vs. 1.5L GE8 vs. GP1 Hybrid / CVT vs. Automatic)
Important: While 1.3L (GE6) and 1.5L (GE8) Honda Fit models share similar lower rear torque rod mounts, the left-hand transmission mount differs between CVT (Japanese Ex-Japan imports) and 5-Speed Torque-Converter Automatic (Non-CVT / USDM / Local) models:
-
1.3L / 1.5L CVT Models (GE6 / GE8 Ex-Japan) OEM Reference:
-
RH Hydraulic Engine Mount:
50820-TF0-981,50820-TF0-J01 -
LH Transmission Mount (CVT):
50850-TF0-981,50850-TF0-J01 -
Rear Torque Rod Mount:
50890-TF0-981,50890-TF0-003
-
-
1.5L 5-Speed Automatic Models (GE8 Non-CVT) OEM Reference:
-
RH Hydraulic Engine Mount:
50820-TK6-981 -
LH Transmission Mount (5AT):
50850-TG0-T02,50850-TK6-912 -
Rear Torque Rod Mount:
50890-TK6-981
-
-
GP1 Hybrid (1.3L LDA) OEM Reference:
-
LH Transmission Mount (Hybrid CVT):
50850-TM8-J01
-
-
Popular Aftermarket Brands: Yamato, Febest, JIKIU, Tenacity, RBI, Hardrace, and Anchor.







There are no reviews yet.