Honda Fit Engine Mount

(0 Reviews) Write a review
1. Honda Fit 3rd Generation (GK3 / GK5 Chassis: 2014–2020)
This generation utilizes a refined torque-rod setup to stabilize engine pitch under rapid acceleration and braking.
  • Right Side Mount (Engine / Timing Chain Side):
    • Design Architecture: Hydraulic / Liquid-Filled Mount with integrated aluminum frame housing.
    • Genuine OEM Part Numbers: 50822-T5R-A01, 50822-T5A-J01
    • Aftermarket Cross-References: Febest (HM-GKRH)

  • Left Side Mount (Transmission / Gearbox Side):
    • Design Architecture: Solid vulcanized natural rubber isolator bracket.
    • Genuine OEM Part Numbers: 50850-T5R-A01, 50850-T5A-911 (CVT specific variants)
    • Aftermarket Cross-References: Febest (HM-GKLH)

  • Rear Lower Mount (Torque Strut / Dog Bone):
    • Design Architecture: Hard rubber dual-bushing anti-torque link rod. Controls backward and forward engine block roll.
    • Genuine OEM Part Numbers: 50890-T5A-911, 50890-T5R-A01
    • Aftermarket Cross-References: Febest (HM-GKR)


2. Honda Fit 2nd Generation (GE6 / GE8 Chassis: 2008–2013)
One of the most common configurations in the market, relying heavily on a large fluid-filled upper right mount.
  • Right Side Mount (Engine / Timing Chain Side):
    • Design Architecture: Premium Hydraulic (Liquid-Filled) core inside a cast-iron/aluminum retaining collar.
    • Genuine OEM Part Numbers: 50822-TF0-J02, 50822-TG0-T02, 50822-TF0-305
    • Aftermarket Cross-References: RBI (O10208RE), Febest (HM-GERH)

  • Left Side Mount (Transmission Upper Mount):
    • Design Architecture: Solid natural rubber dampening cushion bracket assembly.
    • Genuine OEM Part Numbers: 50850-TF0-981, 50850-TF0-J11
    • Aftermarket Cross-References: RBI (O10408LH), Febest (HM-GELH)

  • Rear Lower Mount (Transmission Rear Rod):
    • Design Architecture: Structural rubber damper sleeve link.
    • Genuine OEM Part Numbers: 50890-TF0-911, 50890-TF0-981
    • Aftermarket Cross-References: RBI (O10508R), Febest (HM-GER)


Material & Metallurgical Composition (All Generations)
  • Rubber Polymer Matrix: High-tensile Natural Rubber (NR) blend calibrated to 60–65 Shore A durometer hardness to resist tearing under high shear torque.
  • Hydraulic Fluid Core: Internal chambers packed with low-viscosity glycol-based fluid designed to absorb low-frequency engine resonance at idle speeds.
  • Structural Brackets: Finished with an anti-corrosion black powder coat or zinc-galvanized plating to shield structural steel plates from humidity and rust.

KSh3,500.00

In stock
Buy now

Description

Product Description: Honda Fit / Jazz (GD, GE, & GK Series, 2001–2020) Engine & Transmission Mounting Kit (3-Piece Set)

Overview

The Engine & Transmission Mounting Kit for the Honda Fit / Jazz (GD1/GD3 1st Gen 2001–2008, GE6/GE8 2nd Gen 2007–2014, and GK3/GK5 3rd Gen 2013–2020 with 1.3L L13A/L13B & 1.5L L15A/L15B Engines) is a complete replacement set engineered to restore smooth idle, precise gear selection, and cabin vibration isolation. Specially designed to manage the high torque movement of Honda’s L-series engines and CVT/manual gearboxes, this kit replaces worn, torn, or fluid-leaking original rubber mounts to eliminate dashboard rattle and drivetrain clunks.

Technical Specifications & Characteristics

  • Vehicle Compatibility:

    • 1st Generation (GD1 / GD3): 1.3L L13A / 1.5L L15A (2001–2008)

    • 2nd Generation (GE6 / GE8): 1.3L L13A / 1.5L L15A i-VTEC (2007–2014)

    • 3rd Generation (GK3 / GK5): 1.3L L13B / 1.5L L15B Earth Dreams (2013–2020)

  • Set Composition (3-Piece Set):

    1. Right-Hand (RH / Engine Side) Hydraulic Mount: Positioned on the timing cover side; controls vertical engine movement and dampens combustion vibrations.

    2. Left-Hand (LH / Transmission Side) Mount: Positioned under the air filter housing/battery tray; supports the CVT/manual transmission.

    3. Rear (Lower Torque Rod / Pitch Stop) Mount: Positioned underneath between the subframe and gearbox; controls fore-aft engine rocking during acceleration and braking.

  • Material Construction: High-tensile cast aluminum and stamped steel housings fitted with oil-resistant, high-durometer Natural Rubber (NR) bushings and internal hydraulic fluid damping chambers (on RH side mounts).

  • Fitment Type: Direct OEM replacement matching original subframe and engine bracket mounting holes.

Key Features & Performance Benefits

  1. Eliminates Dashboard Rattle & Idle Shudder: Absorbs engine vibrations, stopping steering wheel shake and interior cabin buzzing when idling in ‘D’ or ‘R’.

  2. Smooths CVT Shift Engagement & Acceleration: Prevents engine tilting during throttle application, eliminating harsh lurching or clunking sounds when accelerating from a stop.

  3. Controls Drivetrain Movement: Restores proper engine and transmission alignment, protecting CV axles and exhaust flex pipes from stress.

  4. Hydraulic Damping Technology: Uses OEM-spec hydraulic fluid chambers on the upper right mount to absorb high-frequency engine harmonics.

Variant & Fitment Notes (GD vs. GE vs. GK Generations)

Important: Engine mount shapes, bracket bolt hole layouts, and transmission mount designs vary across GD, GE, and GK generations as well as between CVT automatic and manual variants:

  • 1st Gen GD (2001–2008) OEM Reference:

    • RH Engine Mount: 50821-SAA-013, 50821-SAA-003

    • LH Transmission Mount: 50805-SAA-982, 50805-SAA-J82

    • Rear Torque Mount: 50810-SAA-982, 50810-SAA-003

  • 2nd Gen GE (2007–2014) OEM Reference:

    • RH Engine Mount: 50820-TF0-981, 50820-TFO-J01

    • LH Transmission Mount: 50850-TF0-981, 50850-TG0-T02

    • Rear Torque Mount: 50890-TF0-981, 50890-TK6-981

  • 3rd Gen GK (2013–2020) OEM Reference:

    • RH Engine Mount: 50820-T5A-003, 50820-T5N-003

    • LH Transmission Mount: 50850-T5A-003

    • Rear Torque Mount: 50890-T5A-003

  • Popular Aftermarket Brands: Tenacity, Febest, Yamato, RBI, JIKIU, Anchor, and Hardrace.

Reviews

There are no reviews yet.

Be the first to review “Honda Fit Engine Mount”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)