Description
Product Description: Mazda CX-5 SkyActiv-D 2.2L Dual-Stage Turbo Diesel Complete Engine Assembly
Overview
The Low-Mileage Complete Replacement Engine Assembly for the Mazda CX-5 (KE Series 1st Gen 2012–2017 & KF Series 2nd Gen 2017–Present featuring KE2FW, KE2AW, KF2P Platforms) is a factory-spec power unit engineered to restore high-torque diesel performance, swift acceleration, and fuel efficiency. Powered by Mazda’s flagship SkyActiv-D 2.2L (SH-VPTS / SH-VPTR) twin-turbocharged intercooled diesel engine, this clean-diesel unit features an ultra-low compression aluminum alloy cylinder block engineered to deliver high pull torque across all driving conditions while maintaining low front-axle engine weight.
Technical Specifications & Characteristics
-
Vehicle Compatibility: Mazda CX-5 (KE2FW / KE2AW 1st Gen 2012–2017 & KF2P 2nd Gen 2017–Present, 2WD & AWD Models)
-
Engine Code: Mazda SH-VPTS / SH-VPTR SkyActiv-D
-
Displacement: 2,191 cc (2.2 Liters)
-
Engine Type: Inline 4-Cylinder, 16-Valve DOHC, Chain-Driven, Water-Cooled Dual-Stage Turbocharged Common-Rail Diesel
-
Block & Head Architecture: High-strength, light-weight aluminum die-cast cylinder block with open-deck coolant passages and integrated balance shaft assembly.
-
Bore & Stroke: 86.0 mm × 94.3 mm
-
Fuel Injection System: High-Pressure Common-Rail Solenoid Injection (up to 2,000 bar injection pressure with multi-hole piezo injectors).
-
Induction System: Sequential Dual-Stage Turbocharger (small high-pressure turbo for low-RPM throttle response paired with a large low-pressure turbo for high-RPM power).
-
Compression Ratio: Ultra-low 14.0:1 diesel compression ratio (lowered combustion pressure enabling lightweight aluminum engine construction).
-
Output Ratings: ~173 HP to 190 HP @ 4,500 RPM / 420 Nm to 450 Nm Torque @ 2,000 RPM.
Key Features & Performance Benefits
-
Restores Massive Pulling Power & Torque: Restores original 420+ Nm low-end torque, eliminating issues caused by low compression, worn twin-turbochargers, or internal oil dilution.
-
Ultra-Low Compression Design: Operating at an industry-low 14.0:1 diesel compression ratio, this engine maximizes air-fuel mixing and thermal efficiency for reduced fuel consumption and lower NOx emissions.
-
Smooth Twin-Turbo Throttle Response: Features a sequential two-stage turbocharging setup that eliminates turbo lag at low speeds while providing sustained highway passing power.
-
Complete Replacement Long-Block Assembly: Complete replacement assemblies include the aluminum cylinder block, cylinder head, internal rotating assembly (crankshaft, pistons, rods), timing chain system, oil pan, and valve cover setup.
Variant & Fitment Notes (KE2FW/KE2AW 1st Gen vs. KF2P 2nd Gen)
Important: The 2.2L SkyActiv-D engine underwent subtle internal updates (such as modified injector spray patterns, updated oil pump drives, and revised AdBlue SCR/EGR systems on later models). Always cross-reference your exact engine harness and chassis platform:
-
KE Chassis (2012–2017): SH-VPTS variant engine with standard DPF and twin-EGR circuit setup.
-
KF Chassis (2017–Present): Updated SH-VPTR / SH-VPTS variant with rapid multi-stage piezo injectors and modified turbo wastegate actuators.
-
Drivetrain Pairing: Direct bolt-on interface for Mazda’s SkyActiv-Drive 6-speed automatic transmission (FWD or AWD transfer case configurations).







There are no reviews yet.