Description
Product Description: Mazda CX-5 (KE Series Chassis, 2012–2017 / 2015 Model Year) Front Lower Control Arm Assemblies (Wishbones)
Overview
The Front Lower Control Arm Assembly Set for the 2015 Mazda CX-5 (KE Series 1st Gen, KE2FW / KE2AW / KEEFW / KEEAW / KE5FW / KE5AW Chassis, 2.0L / 2.5L SkyActiv-G & 2.2L SkyActiv-D Engines, 2WD FWD & 4WD AWD) is a complete front suspension replacement engineered to restore “Jinba Ittai” handling precision, wheel alignment stability, and ride comfort. Each complete assembly comes pre-fitted with heavy-duty vulcanized rubber bushings and a pre-greased lower ball joint, providing an all-in-one fix for front-end clunks, loose steering, and accelerated tire wear.
Technical Specifications & Characteristics
-
Vehicle Compatibility: 2015 Mazda CX-5 (KE Series 1st Generation, 2012–2017)
-
2.0L Petrol: KEEFW (2WD) / KEEAW (AWD)
-
2.5L Petrol: KE5FW (2WD) / KE5AW (AWD)
-
2.2L Diesel: KE2FW (2WD) / KE2AW (AWD)
-
-
Position: Front Axle (Left Front LH & Right Front RH specific).
-
Pre-Assembled Components: High-strength stamped/forged steel control arm body, heavy-duty vulcanized Natural Rubber (NR) pivot bushings (front inner bush & rear pillow block bush), and a micro-polished lower ball joint with a dust cover boot.
-
Material & Surface Finish: High-tensile structural steel treated with a corrosion-resistant black powder coating to withstand gravel, road grime, and moisture exposure.
-
Mounting Configuration: Direct factory bolt-on fitment attaching directly to the front subframe crossmember and lower steering knuckle assembly via pinch-bolt clamped ball joint pin.
Key Features & Performance Benefits
-
Eliminates Front-End Clunking & Knocking: Replaces degraded, cracked rear pillow block bushings and loose ball joints that cause thumping noises over potholes, speed bumps, and rough roads.
-
Restores Steering Precision & High-Speed Stability: Keeps wheel castor and camber angles firmly locked, stopping steering wheel drift, high-speed shudder, and front-end instability under hard braking.
-
Prevents Premature & Uneven Tire Wear: Preserves front suspension geometry, preventing excessive inner or outer shoulder tire tread scrubbing.
-
Complete Pre-Bushed & Pre-Ball-Jointed Unit: Saves installation time and labor costs by replacing the entire wishbone assembly rather than press-fitting individual bushings or ball joints separately.
Variant & Fitment Notes (2015 Mid-Cycle Facelift KE Series)
Important: The 2015 model year represents the mid-cycle facelift for the 1st Generation CX-5 (KE series). While 2WD (FWD) and 4WD (AWD) models share identical control arm dimensions, rear bushing design revisions were introduced to enhance ride compliance on later models:
-
Front Right (RH) Control Arm OEM Reference:
KD35-34-300,KD35-34-300A,KD35-34-300B,KD35-34-300C,KD35-34-300D -
Front Left (LH) Control Arm OEM Reference:
KD35-34-350,KD35-34-350A,KD35-34-350B,KD35-34-350C,KD35-34-350D -
Popular Aftermarket Brands: 555 (Sankei Japan), CTR (Korea), Hardrace, Febest, JIKIU, Yamato, and RBI.







There are no reviews yet.