Description
Product Description: Mazda Demio / Mazda 2 (DE3FS, DE5FS, DJ3FS, & DJ5FS Chassis, 2010–2018 Model Years) Engine & Transmission Mounting Kit (3-Piece / 4-Piece Set)
Overview
The Engine & Transmission Mounting Kit for the Mazda Demio / Mazda 2 (3rd Gen DE Series 2010–2014 with 1.3L ZJ-VE / ZJ-VEM & 1.5L ZY-VE Engines, and 4th Gen DJ Series 2014–2018 with 1.3L P3-VPS SkyActiv-G, 1.5L FP-VPS SkyActiv-G, & 1.5L S5-DPTS SkyActiv-D Diesel Engines) is a complete replacement set engineered to stabilize the powertrain, eliminate deep cabin rumbles, and ensure smooth gear engagement. Designed to isolate dynamic engine combustion shocks and transmission torque from Mazda’s lightweight unibody frame, this kit replaces hardened, cracked, or fluid-leaking factory mounts to restore factory-smooth idling and sharp throttle response.
Technical Specifications & Characteristics
-
Vehicle Compatibility:
-
3rd Generation (DE Series 2010–2014): DE3FS (1.3L 2WD), DE3AS (1.3L 4WD), DE5FS (1.5L 2WD), DEJFS (1.3L SkyActiv)
-
4th Generation (DJ Series 2014–2018): DJ3FS (1.3L SkyActiv 2WD), DJ3AS (1.3L 4WD), DJ5FS (1.5L Diesel 2WD), DJ5AS (1.5L Diesel 4WD), DJLFS (1.5L Petrol)
-
-
Powertrain Compatibility: 1.3L MZR / SkyActiv-G, 1.5L MZR / SkyActiv-G, and 1.5L SkyActiv-D Turbo Diesel paired with CVT, 4-Speed Automatic, 6-Speed Automatic (SkyActiv-Drive), or 5/6-Speed Manual Transmissions.
-
Set Composition:
-
Right-Hand (RH / Engine Side) Hydraulic Mount: Positioned on the engine timing cover side; supports primary engine weight and features an internal oil-filled hydraulic chamber to dampen high-frequency vertical engine vibrations.
-
Left-Hand (LH / Transmission Side) Mount: Positioned under the air intake assembly and battery tray; secures the gearbox casing directly to the left frame rail.
-
Rear (Lower Pitch Suppressor / Torque Rod) Mount: Positioned underneath between the lower front subframe and transmission bellhousing; controls fore-aft engine rocking during throttle acceleration and hard braking.
-
-
Material Construction: Heavy-duty cast aluminum housings, stamped structural steel brackets, high-durometer Natural Rubber (NR) compounds, and sealed hydraulic fluid dampening chambers.
-
Fitment Type: Direct factory bolt-on fitment using original subframe and unibody frame mounting locations.
Key Features & Performance Benefits
-
Eliminates Dashboard Shudder & Steering Wheel Vibration: Absorbs low-frequency engine rumbles, stopping steering wheel buzz, dashboard rattling, and cabin shudder when idling in ‘D’ or stopped at traffic lights.
-
Smooths Throttle Engagement & Gear Shifts: Prevents engine and transmission tilt under load, eliminating heavy thumps, drivetrain lurching, or jerking when pressing the accelerator pedal.
-
Protects CV Axles & Exhaust Plumbing: Holds the powertrain in precise factory alignment, protecting inner CV axle joints, boot seals, and exhaust flex pipes from excessive mechanical twisting stress.
-
Hydraulic Vibration Dampening: Features an OEM-spec hydraulic fluid chamber inside the primary upper right engine mount to absorb severe road impacts and high-frequency engine harmonics before they reach the cabin.
Variant & Fitment Notes (DE Series MZR 2010–2014 vs. DJ Series SkyActiv 2014–2018 / Petrol vs. Diesel)
Important: Mazda Demio engine mounts underwent a major design platform update between the 3rd Gen DE Series and the 4th Gen DJ SkyActiv Series. Mounting brackets and hydraulic offset differ significantly between MZR (DE), SkyActiv-G (DJ Petrol), and SkyActiv-D (DJ Diesel):
-
3rd Gen DE Series (2010–2014 MZR / DEJFS) OEM Reference:
-
RH Hydraulic Engine Mount:
D651-39-060,D651-39-060D,D09H-39-060 -
LH Transmission Mount:
D651-39-070,D651-39-070B -
Rear Lower Mount:
D651-39-040,D651-39-040A
-
-
4th Gen DJ Series (2014–2018 SkyActiv Petrol / Diesel) OEM Reference:
-
RH Hydraulic Engine Mount:
DA6C-39-060,DB2R-39-060,D09H-39-060A -
LH Transmission Mount:
DA6C-39-070,DB01-39-070 -
Rear Lower Mount:
DA6C-39-040,DB2R-39-040
-
-
Popular Aftermarket Brands: Yamato, Febest, JIKIU, Tenacity, RBI, Hardrace, and Anchor.







There are no reviews yet.