Description
Product Description: Mazda Demio / Mazda 2 (DJ Chassis Series, 2014–Present / 2015 Model Year) Engine & Transmission Mounting Kit (3-Piece Set)
Overview
The Engine & Transmission Mounting Kit for the 2015 Mazda Demio / Mazda 2 (DJ Chassis 4th Generation, DJ3FS 1.3L P3-VPS / DJ5FS 1.5L S5-DPTS Diesel / DJLFS 1.5L P5-VPS with 6-Speed SkyActiv-Drive Automatic & Manual Transmissions) is a complete 3-piece vibration-isolation replacement set. Specially engineered to secure Mazda’s lightweight SkyActiv powertrains, this kit replaces worn, cracked, or fluid-leaking factory mounts to eliminate cabin vibration, restore smooth acceleration, and stop engine movement during gear shifts.
Technical Specifications & Characteristics
-
Vehicle Compatibility: 2015 Mazda Demio / Mazda 2 (DJ3FS, DJ3AS, DJ5FS, DJ5AS, DJLFS Chassis Codes, 2014–Present)
-
Powertrain Compatibility: 1.3L P3-VPS Petrol, 1.5L P5-VPS Petrol, and 1.5L S5-DPTS Turbo-Diesel
-
Set Composition (Complete 3-Piece Set):
-
Right-Hand (RH / Engine Side) Upper Hydraulic Mount: Positioned on the timing cover side; supports primary engine mass and incorporates a sealed hydraulic chamber to absorb vertical combustion shocks.
-
Left-Hand (LH / Transmission Side) Mount: Positioned under the air filter box/battery area; secures the SkyActiv-Drive transmission casing to the left chassis rail.
-
Rear (Lower Torque Rod / Pitch Suppressor) Mount: Positioned underneath between the subframe and gearbox; prevents fore-aft engine rocking under acceleration and braking.
-
-
Material Construction: Lightweight cast aluminum housings and stamped steel brackets equipped with high-durometer, oil-resistant Natural Rubber (NR) and internal hydraulic fluid dampening chambers.
-
Fitment Type: Direct OEM bolt-on fitment using original factory mounting points on the DJ chassis subframe and body rails.
Key Features & Performance Benefits
-
Eliminates Steering Wheel & Cabin Buzzing: Absorbs harmonic engine vibrations, stopping steering wheel shake, dashboard buzzing, and pedal shudder at idle in ‘D’ or ‘R’.
-
Smooths SkyActiv Gear Shifts: Prevents engine and transmission tilt during throttle application, eliminating harsh lurching or clunking sounds when pulling away or kicking down.
-
Controls Engine Rocking: Restores precise engine alignment within the compact DJ engine bay, protecting CV axles, exhaust flex pipes, and radiator hoses from physical stress.
-
Hydraulic Vibration Isolation: Features OEM-spec hydraulic fluid damping in the upper right-hand mount to absorb low-frequency engine rumbles.
Variant & Fitment Notes (1.3L/1.5L Petrol vs. 1.5L SkyActiv-D Diesel)
Important: While 1.3L and 1.5L Petrol DJ-series Demios share similar upper right hydraulic mounts, 1.5L SkyActiv-D Diesel models (DJ5FS) feature a heavier-duty hydraulic dampening rate to accommodate higher low-end torque outputs:
-
Right-Hand (RH Engine) Mount OEM Reference:
-
Petrol (DJ3FS / DJLFS):
D09H-39-060,D09H-39-060A,DA6C-39-060 -
Diesel (DJ5FS):
D09W-39-060,D09W-39-060A
-
-
Left-Hand (LH Transmission) Mount OEM Reference:
D09H-39-070,DB2R-39-070 -
Rear Torque Rod Mount OEM Reference:
D09H-39-040,D09H-39-040A -
Popular Aftermarket Brands: Tenacity, Febest, Yamato, RBI, JIKIU, and Hardrace.







There are no reviews yet.