Nissan Note Beam Model E12

(0 Reviews) Write a review
1. Structural Geometry & Alignment Specs
The E12 platform utilizes a semi-independent rear suspension layout with a semi-rigid twist profile:
  • Suspension Architecture Type: Torsion Beam / Twist Beam Axle with trailing arms. [1, 2]
  • Rear Track Width: 1,485 mm (standard variants). [1, 2]
  • Wheelbase Compatibility: 2,600 mm. [1, 2]
  • Brake Integration Interface: Formed with integral backing plates designed to accept factory 203 mm hydraulic drum brake units or specialized solid disc calipers (market/trim dependent). [1, 2]
  • Stabilizer Element: Built with an integrated inner anti-roll sway bar welded directly inside the V-shape profile of the torsion beam structure to control body roll.
2. OEM Part Numbers & Drive Layouts
  • Standard Front-Wheel Drive Layout (2WD / 4×2 / FF):
    • Nissan Original Equipment (OE) Codes: 55501-3VA0A, 55501-3VA0B, 55501-5WH0A [1]

  • All-Wheel Drive / Four-Wheel Drive Layout (4WD / 4×4 / e-POWER 4WD):
    • Nissan Original Equipment (OE) Code: 55501-3VE1B [1]

  • Matching Rear Pivot Axle Bushing Code: 55045-1HJ0A [1]
3. Material & Component Composition
  • Material Matrix: High-tensile cold-stamped structural spring steel with variable wall thickness for progressive roll rigidity.
  • Mounting Interface: Dual forward-facing eyelets carrying pre-pressed vulcanized natural rubber silent-block compliance bushings.
  • Coil Spring Mount Geometry: Dual welded structural lower spring seats configured for linear-rate coil springs and single-tube vertical dampening shock absorbers. [1]
4. Vehicle Platform Alignment
  • Chassis Series Covered: Nissan Note (DBA-E12, DBA-NE12 4WD, HE12 e-POWER).
  • Powertrain Mating: HR12DE (1.2L 3-cylinder), HR12DDR (1.2L Supercharged), and HR12DE-EM57 (e-POWER Hybrid systems). [1, 2, 3]

KSh20,000.00

In stock
Buy now

Description

Product Overview

The Rear Axle Beam is the major structural backbone of the Nissan Note E12’s rear suspension system. Built as a semi-independent torsion beam setup, it connects the left and right rear wheels, maintains correct rear wheel alignment, and supports the vehicle’s rear weight load. It works alongside the rear coil springs and shock absorbers to control body roll, absorb road impacts, and provide stable handling.

Key Technical Specifications

  • Fitting Position: Rear Axle Assembly

  • Design Type: Semi-independent Torsion Beam / Crossmember

  • Included Core Elements:

    • Heavy-duty tubular/pressed steel crossbeam body

    • Pre-pressed rear axle beam/trailing arm bushings (at the chassis mounting points)

    • Integrated mounting brackets for rear shock absorbers, coil springs, and brake assemblies (drums or discs depending on the trim level like MEDALIST, NISMO, or standard e-POWER/petrol variants).

  • Compatibility: Fits global and Japanese domestic market (JDM) Nissan Note E12 variants (including HR12DE, HR12DDR, and HE12 e-POWER layouts).

Material & Build Quality

  • Material Composition: Fabricated from high-strength structural sheet and tubular steel, engineered to endure high torsional stress, twisting forces, and heavy cargo loads without permanent bending.

  • Surface Protection: Finished with a heavy-duty, chip-resistant black anti-corrosion coating to prevent rust, stone-chip damage, and degradation from road moisture and salt.

OEM & Cross-Reference Part Numbers

  • Nissan OEM Part Numbers: Typically cross-references codes in the range of 55501-3VA1A, 55501-3VA1B, or region-specific structural variants.

Signs of Damage or Wear

While rear axle beams are designed to last the lifetime of the vehicle, they may require replacement or servicing due to accidents, severe overloading, or deep corrosion. Common indicators of a compromised rear beam include:

  1. Persistent Rear Misalignment: If the vehicle tracks sideways or fails a wheel alignment check despite healthy suspension arms, the beam may be bent.

  2. Clunking or Banging Noises: Heavy thuds from the back over bumps, typically pointing to worn-out rear axle beam bushings.

  3. Uneven Rear Tire Wear: Cupping or abnormal wear patterns on the inner/outer edges of the rear tires.

Reviews

There are no reviews yet.

Be the first to review “Nissan Note Beam Model E12”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)