Nissan Note Model E11 Crossmember Mountain

(0 Reviews) Write a review
Component Overview & Dimensions

  • Component Type: Front Axle Subframe Crossmember / Suspension Cradle.
  • Material Composition: High-grade structural stamped steel.
  • Surface Protective Treatment: Dual-layer protection featuring a Ceramic Conversion Coating combined with an Electrophoretic (E-coat) anti-corrosion finish.
  • Bushing Fitment Specifications: Inner Diameter: 17mm | Outer Diameter: 41mm.
  • Installation Profile: Bolt-on configuration with pre-installed bushings. [1, 2, 3, 4, 5, 6, 7]
Part Numbers & Interchangability

  • Primary OE/OEM Reference: 8200371332. [1, 2]
  • Alternative & Superseded Part Numbers:
    • 544009U000, 544009U21A, 544009U22A, 544009U23A
    • 54400AX602, 54400BC10A, 54400BC11A, 54400BC12A
    • 8200475469, 8200766078, 8200766079, 8200766085, 8200500491 [1, 2]

  • Platform Compatibility: Nissan B Platform (Shared layout across Nissan Note E11/NE11 2005–2013, Nissan Micra K12, Renault Clio III, and Renault Modus). [1, 2, 3, 4]
Engine & Powertrain Matching

  • Compatible Engine Displacements: 1.4L, 1.5L, 1.6L Petrol (including HR15DE) and 1.5L dCi Diesel variants.
  • Drivetrain Layout: Front-Wheel Drive (FWD) layouts. [1, 2, 3, 4, 5]

KSh3,000.00

In stock
Buy now

Description

Product Overview

The Crossmember Mounting is a heavy-duty rubber-metal bushing or insulator that connects the vehicle’s front suspension subframe (crossmember) to the unibody chassis. Its primary purpose is to firmly anchor the subframe—which supports the lower control arms, steering rack, and lower powertrain mounts—while absorbing high-frequency road vibrations, impacts, and torque reactions before they can travel up into the vehicle’s floorboards and steering column.

Key Technical Specifications

(Standard specifications for the Nissan Note E11 front crossmember mountings):

  • Fitting Position: Front Subframe / Crossmember Assembly (typically utilizes a set of front and rear mounting bushings on the subframe structure)

  • Design Type: Pressed-metal outer sleeve bonded with heavy-duty, high-durometer vulcanized inner rubber and a central metal collar/sleeve for the mounting bolt.

  • Compatibility: Fits all standard petrol and diesel E11 hatchback variants (sharing platform architecture with the Nissan Tiida C11 and Cube Z12).

Material & Build Quality

  • Material Composition: Industrial-grade rubber compound bonded to high-strength steel sleeves, engineered to resist tearing, sagging, and degradation from oil leaks, road salt, and weather exposure.

  • Structural Integrity: Built to withstand immense vertical wheel loads and twisting forces from the front suspension without allowing unwanted shifting of the subframe alignment.

OEM & Cross-Reference Part Numbers

  • Nissan OEM Part Numbers:

    • Subframe Bushing / Mount Series: Cross-references parts under numbers such as 54466-ED000, 54467-ED000, or complete subframe insulator assemblies.

  • Popular Aftermarket Brands: Febest, GSP, YAMATO, RBI, and Febi Bilstein.

Common Signs of Worn Crossmember Mounts on an E11

When the rubber inside these mounts cracks, deteriorates, or separates completely, you will typically experience:

  1. Clunking or Thumping over Bumps: A heavy, hollow metallic thud or clunk when driving over speed bumps, potholes, or sharp road transitions.

  2. Vague or Shifting Steering: A loose feeling in the steering wheel or a momentary delay in steering response as the subframe shifts slightly under cornering loads.

  3. Subframe Movement / Alignment Loss: If the mounts are completely worn, the entire subframe can shift relative to the chassis, throwing off wheel alignment and causing rapid, uneven tire wear.

Reviews

There are no reviews yet.

Be the first to review “Nissan Note Model E11 Crossmember Mountain”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)