Nissan Note Model E12 Engine Mounting

(0 Reviews) Write a review
1. Component Breakdown & OEM Part Numbers
The E12 platform utilizes a three-point suspended engine containment setup designed to isolate the low-frequency vibrations typical of 3-cylinder powertrains:
  • Right-Hand Engine Mount (Front Right / Timing Side):
    • OEM Part Numbers: 11210-3HD3A, 11210-3HD0A
    • Function: Primary weight-bearing insulator. It secures the engine block to the right-hand chassis frame rail and absorbs primary engine harmonics. [1, 2]

  • Left-Hand Transmission Mount (Front Left / Gearbox Side):
    • OEM Part Numbers: 11220-3HD2A, 11360-1HC3C
    • Function: Gearbox casing insulator. It bears the weight of the transmission case, counteracting drivetrain movement during deceleration and CVT ratio adjustments. [1]

  • Rear Torque Rod (Lower Engine Stabilizer / “Dog-Bone” Mount):
    • OEM Part Numbers: 11360-1HC0A, 11360-1HC0D
    • Function: Lower restriction link. It fastens the rear of the transmission casing directly to the lower subframe cross-member to suppress the rotational “pitching” or rocking motion of the engine during acceleration. [1, 2]

2. Vehicle Structural Fitment
  • Engine Installation: Transverse alignment (East-West configuration)
  • Chassis & Powertrain Compatibility:
    • DBA-E12 (2WD): 1.2L 3-cylinder naturally aspirated (HR12DE) or 1.2L 3-cylinder supercharged (HR12DDR)
    • DBA-NE12 (4WD): 1.2L 3-cylinder Petrol variants
    • HE12 (e-POWER): 1.2L HR12DE paired with the EM57 electric motor generation system [1, 2]

  • Platform Sharing Interchangeability: The engine mounts directly match the mounting layout used on the Nissan March / Micra (K13) and the Nissan Latio (N17) platforms. [1, 2]
3. Material Specifications
  • Material Composition: Specially treated, high-absorption vulcanized natural rubber chemically bonded to stamped structural carbon steel base plates and cast aluminum brackets.
  • Damping Classification: Standard solid-core high-damping elastomeric design (passive configuration) optimized to target secondary-order idle frequencies.
4. Standard Installation Torque Specifications
  • Right-Hand Mount-to-Chassis Bolts: ~62 Nm (approx. 45 ft-lbs)
  • Right-Hand Mount-to-Engine Bracket Bolts: ~62 Nm (approx. 45 ft-lbs)
  • Left-Hand Mount-to-Gearbox Casing Stud/Nut: ~62 Nm to 80 Nm (approx. 45 to 59 ft-lbs)
  • Rear Lower Torque Rod Bracket Bolts: ~80 Nm (approx. 59 ft-lbs) [1, 2, 3]

KSh4,000.00

In stock
Buy now

Description

Product Overview

The Engine Mountings on a Nissan Note E12 are vital structural components engineered to securely anchor the lightweight 3-cylinder petrol or hybrid powertrain to the vehicle’s frame. Because compact engines generate high-frequency micro-vibrations, these mounts utilize high-tensile steel brackets fused with high-density, tear-resistant vulcanized rubber (and hydraulic fluid filling on primary load-bearing positions) to absorb powertrain shudder, manage torque reactions, and isolate noise from the cabin.

E-spareparts

Key Positions in the E12 Mounting Set

A complete replacement lineup for the Nissan Note E12 typically consists of three primary positions:

  1. Right-Side / Upper Engine Mount (Passenger/Side Mount): Supports the main weight of the engine block and acts as the primary isolator for high-frequency idling vibrations.

  2. Left-Side / Transmission Mount (Gearbox Mount): Anchors the transmission side, absorbing shifting forces and drivetrain torque under acceleration.

  3. Rear / Lower Torque Strut Mount: Stabilizes the lower engine/gearbox assembly, restricting front-to-back engine rocking during acceleration, deceleration, and gear changes.

Key Technical Specifications & Build Quality

  • Material Composition: High-strength structural steel brackets combined with industrial-grade rubber compounds or fluid-filled damping chambers.

    E-spareparts
  • Design Engineering: Custom-molded to strict OE clearance tolerances to prevent the engine block or exhaust system from striking the chassis subframe.

  • Compatibility: Covers E12 hatchback variations including standard 1.2L petrol (HR12DE), supercharged DIG-S (HR12DDR), and the e-POWER hybrid series.

    Spares Mall Kenya

Common OEM & Cross-Reference Part Numbers

  • Nissan OEM Part Numbers:

    • Right Engine Mount: 11210-1HC3C / 11220-1KG0A variants

      AUTODOC UK
    • Left / Transmission Mount: 11360-1HC3C / 11360-1HC0B

    • Rear Lower Mount: Cross-references standard OE rubber-metal insulators like 11360-1HC3A

  • Popular Aftermarket Brands: Febest, GSP, Kavo Parts, Febi Bilstein, and Blue Print.

Common Signs of Worn Engine Mounts on a Nissan Note E12

When the rubber degrades, cracks, or hydraulic fluid leaks from a mount, you will typically experience:

  1. Heavy Idling Vibration: A pronounced buzzing, shaking, or humming felt through the steering wheel, dashboard, or floorboards when stopped in Drive (AT) or at a traffic light.

  2. Clunking or Thudding Noises: A sharp metallic knock when shifting between Park, Reverse, and Drive, or when stepping sharply on the accelerator pedal.

  3. Excessive Engine Movement: Visible rocking or shifting of the engine block when the throttle is blipped with the hood open.

Reviews

There are no reviews yet.

Be the first to review “Nissan Note Model E12 Engine Mounting”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)