Nissan Serena Engine Mount

(0 Reviews) Write a review
4-Piece System Configuration
The Nissan Serena utilizes a 4-point modular engine mounting network to secure the MR20DE engine and CVT powertrain layout. This configuration divides support across four distinct positions: [1, 2]
  • Right Hand (RH) Mount: Main engine support mount.
  • Left Hand (LH) Mount: Main gearbox/transmission support mount.
  • Rear Mount / Torque Strut: Manages longitudinal engine pitching under acceleration.
  • Front Mount / Pull-Down Rod: Stabilizes base structural vibration. [1]
Hardware & Material Specifications
  • Primary Bracket Composition: Die-cast structural steel or high-tensile reinforced aluminum brackets. [1, 2]
  • Isolator Type: Natural shock-reducing rubber matrix, with select primary load-bearing points using hydraulic (fluid-filled) dampening modes to maximize vibration mitigation. [1, 2]
  • Average System Component Weight:
    • Front torque link/mount: ~0.80 kg to 0.86 kg.
    • Left Front / Main Hydraulic Mounts: ~1.16 kg. [1, 2, 3]

Genuine OEM Part Numbers & Cross-References
3rd Generation (C25 Series) | 2005 – 2010 [1]
  • Front Mount (Pull-Down Rod): 11380-EN000, 11380-EN00A (Interchangeable with C26)
  • Rear Engine Mount: 11360-CY00A
  • Aftermarket Reference (Febest): NM-C25R (Rear), NM-C26 (Front) [1, 2, 3, 4]
4th Generation (C26 Series) | 2010 – 2016 [1]
  • Right Hand (RH) Engine Mount: 11210-1V30B
  • Left Hand (LH) Transmission Mount: 11220-1V30A
  • Rear Torque Mount: 11360-JD00A
  • Front Pull-Down Rod: 11380-EN00A
  • Aftermarket Reference (VAICO): V20-0480 (Hydraulic)

KSh4,500.00

In stock
Buy now

Description

Product Description: Nissan Serena (C25, C26, & C27 Series, 2005–2022) Engine & Transmission Mounting Kit (4-Piece Set)

Overview

The Engine & Transmission Mounting Kit for the Nissan Serena (C25 2005–2010, C26 2010–2016, and C27 2016–2022 with 2.0L MR20DE & MR20DD Engines, including S-Hybrid variants) is a complete replacement set engineered to eliminate cabin vibration, smooth out transmission gear engagement, and restore factory engine stability. Specially designed to support the substantial weight and torque of Nissan’s 2.0L powertrain and Xtronic CVT gearbox, this kit replaces hardened, torn, or leaking original hydraulic mounts to restore executive minivan quietness and cabin refinement.

Technical Specifications & Characteristics

  • Vehicle Compatibility:

    • C25 Series (2005–2010): C25, CC25 (2.0L MR20DE, FWD & 4WD)

    • C26 Series (2010–2016): C26, FC26, FNC26 (2.0L MR20DD / S-Hybrid, FWD & 4WD)

    • C27 Series (2016–2022): C27, GC27, GFC27 (2.0L MR20DD / S-Hybrid, FWD & 4WD)

  • Set Composition (Complete 4-Piece Set):

    1. Right-Hand (RH / Front Engine Side) Hydraulic Mount: Positioned on the timing chain side; absorbs primary engine weight and dynamic vertical combustion shocks.

    2. Left-Hand (LH / Transmission Side) Mount: Positioned under the air filter housing; supports the Xtronic CVT transmission.

    3. Rear (Lower Torque Rod / Pitch Suppressor) Mount: Positioned underneath between subframe and gearbox; controls fore-aft engine rocking during acceleration.

    4. Front Lower Torque Rod Mount: Secondary lower stabilizer bar controlling engine torque twist.

  • Material Construction: Heavy-duty cast aluminum alloy housings and stamped steel brackets fitted with high-durometer Natural Rubber (NR) and internal fluid-filled hydraulic damping chambers.

  • Fitment Type: Direct factory bolt-on fitment matching original subframe and chassis mounting points.

Key Features & Performance Benefits

  1. Eliminates Steering & Dashboard Shake: Absorbs engine harmonic vibrations, stopping steering wheel buzz, floorboard shudder, and interior trim rattling when idling in ‘D’ or ‘R’.

  2. Smooths CVT Shift Engagement & Throttle Response: Prevents engine and gearbox tilt during acceleration, eliminating harsh lurching or clunking sounds when pulling away.

  3. Controls Engine Rock & Drivetrain Alignment: Keeps the engine aligned properly within the engine bay, protecting CV axles, exhaust flex pipes, and cooling hoses from physical stress.

  4. Hydraulic Damping Technology: Uses OEM-spec hydraulic fluid chambers on upper mounts to effectively dampen low-frequency engine vibrations.

Variant & Fitment Notes (C25 vs. C26 vs. C27 Generations)

Important: While C25, C26, and C27 Serena models share the 2.0L engine family architecture, mounting bracket shapes and subframe attachment points vary significantly across generations and between standard and S-Hybrid powertrains:

  • C25 Generation (2005–2010) OEM Reference:

    • RH Engine Mount: 11210-CY00A, 11210-CY00B

    • LH Transmission Mount: 11220-CY000, 11220-CY00A

    • Rear Torque Rod: 11360-CY000, 11360-JY000

  • C26 Generation (2010–2016) OEM Reference:

    • RH Engine Mount: 11210-1VA0A, 11210-1VA0B

    • LH Transmission Mount: 11220-1VA0A

    • Rear Torque Rod: 11360-1VA0A

  • C27 Generation (2016–2022) OEM Reference:

    • RH Engine Mount: 11210-5TA0A, 11210-5TA0B

    • LH Transmission Mount: 11220-5TA0A

    • Rear Torque Rod: 11360-5TA0A

  • Popular Aftermarket Brands: Tenacity, Febest, Yamato, RBI, JIKIU, Anchor, and Hardrace.

Reviews

There are no reviews yet.

Be the first to review “Nissan Serena Engine Mount”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)