Nissan Xtrail NT32 Engine Mountain

(0 Reviews) Write a review
Engine Mount System Layout

  • Total Number of Mounts: 4 individual mounting points [1]
  • Mount Components:
    • Right-Hand (Passenger Side): Main engine rubber-metal suspended engine mount
    • Left-Hand (Driver Side): Transmission / Gearbox rubber pad mounting
    • Upper Front / Right: Torque strut rod / Torque stabilizer link (prevents engine twisting under acceleration)
    • Rear (Lower): Rear torque support mount / “Dog bone” mount attached to the subframe [1, 2, 3, 4, 5]

  • Mounting Materials: Heavy-duty vulcanized elastomer rubber structurally bonded to cast aluminum and forged steel outer brackets. [1, 2]
Engine Mount Torque Specifications

  • Right-Hand Suspended Mount Bolt (Body Side): 62 Nm (approx. 45 ft-lbs)
  • Right-Hand Suspended Mount Bolt (Engine Side): 62 Nm (approx. 45 ft-lbs)
  • Upper Engine Torque Strut Link Bolts: 75 Nm (approx. 55 ft-lbs)
  • Left-Hand Gearbox Mount (To Bracket): 62 Nm (approx. 45 ft-lbs)
  • Left-Hand Rubber Pad Bolt (To Body): 21 Nm (approx. 15 ft-lbs)
  • Left-Hand Rubber Pad Bolt (To Mounting): 105 Nm (approx. 77 ft-lbs)
  • Transmission Mount Main Stud (Gearbox Side): 180 Nm (approx. 132 ft-lbs)
  • Rear Lower Torque Rod (Engine Tie-Bar Bolt): 180 Nm (approx. 132 ft-lbs) [1, 2]
Supported Engine Specifications (NT32 Core Block – MR20DD)

The NT32 chassis configuration denotes the 4WD version of the T32 X-Trail, which houses the 2.0L MR20DD powertrain: [1, 2]
  • Engine Code: MR20DD
  • Configuration: Inline 4-Cylinder, DOHC, 16 Valves with Twin CVTC
  • Fuel Injection: Direct Fuel Injection (Nissan Di)
  • Displacement: 1,997 cc
  • Cylinder Bore x Piston Stroke: 84.0 mm × 90.1 mm
  • Compression Ratio: 11.2:1
  • Maximum Power: 147 PS (108 kW / ~145 HP) @ 6,000 rpm
  • Maximum Torque: 207 Nm (21.1 kg·m) @ 4,400 rpm

KSh8,000.00

In stock
Buy now

Description

Product Description: Nissan X-Trail (NT32 / T32 Chassis, 2013–2021) Engine & Transmission Mounting Kit (4-Piece Set)

Overview

The Engine & Transmission Mounting Kit for the Nissan X-Trail (NT32 2.0L MR20DD 4WD, T32 2.0L MR20DD 2WD, HT32 / HNT32 Hybrid, and QR25DE 2.5L 4WD, 3rd Generation 2013–2021 with XTRONIC CVT Transmission) is a complete 4-piece replacement set engineered to support the powertrain, eliminate deep cabin vibrations, and preserve smooth gear shifting. Designed to handle the engine torque and AWD drivetrain stress of Nissan’s CMF-C/D SUV platform, this kit replaces cracked, sagging, or fluid-leaking factory rubber mounts to restore original cabin quietness and driving comfort.

Technical Specifications & Characteristics

  • Vehicle Compatibility: Nissan X-Trail 3rd Gen (T32 2WD, NT32 4WD, HT32 Hybrid 2WD, HNT32 Hybrid 4WD, 2013–2021)

    • (Also cross-fits Nissan Rogue T32 2.5L North American imports).

  • Engine & Transmission Compatibility: 2.0L MR20DD Direct Injection, 2.0L MR20DD Hybrid, and 2.5L QR25DE engines paired with XTRONIC Continuously Variable Transmission (CVT).

  • Set Composition (Complete 4-Piece Set):

    1. Right-Hand (RH / Engine Side) Upper Hydraulic Mount: Positioned on the timing cover side; supports primary engine weight and features a sealed hydraulic fluid chamber to absorb vertical combustion shocks.

    2. Left-Hand (LH / Transmission Side) Mount: Positioned under the air filter housing and battery tray; secures the CVT transmission casing to the left frame rail.

    3. Rear Lower Torque Rod (Pitch Suppressor) Mount: Positioned underneath between the front subframe and CVT casing; controls fore-aft engine rocking during acceleration and braking.

    4. Front Upper Engine Torque Damper (Dogbone Link): Positioned at the top right of the engine bay; controls engine twist under dynamic throttle loads.

  • Material Construction: Heavy-duty cast aluminum housings, stamped structural steel brackets, high-durometer Natural Rubber (NR), and fluid-filled hydraulic dampening chambers.

  • Fitment Type: Direct factory bolt-on fitment using original chassis and subframe mounting points.

Key Features & Performance Benefits

  1. Eliminates Cabin Vibrations & Dashboard Shudder: Absorbs engine harmonic frequencies, stopping steering wheel buzz, floorboard vibration, and seat shaking while idling in ‘D’ at traffic lights.

  2. Smooths CVT Shift Transitions & Acceleration: Prevents engine and transmission tilt under load, eliminating heavy thumps, drivetrain lurching, or jerking when pressing the throttle.

  3. Protects CV Axles & Exhaust Flex Pipes: Holds the powertrain in precise alignment, preventing excessive drivetrain movement from tearing axle boots, damaging CV joints, or cracking exhaust manifold flex pipes.

  4. Hydraulic Shock Isolation: Uses OEM-spec hydraulic fluid chambers on the main upper right engine mount to absorb severe road impacts and engine vibration before they reach the unibody frame.

Variant & Fitment Notes (2.0L MR20DD vs. 2.5L QR25DE vs. HT32 Hybrid)

Important: While 2.0L NT32 and 2.5L T32 X-Trail models share similar lower subframe mounting layouts, the primary right-hand hydraulic engine mount and upper torque link differ in bracket offsets and hydraulic valving across engine displacements and Hybrid powertrains:

  • 2.0L Petrol (NT32 / T32) OEM Reference:

    • RH Hydraulic Engine Mount: 11210-4BA0A, 11210-4BA0B

    • LH Transmission Mount: 11220-4BA0A, 11220-4BA0B

    • Rear Lower Torque Rod Mount: 11360-4BA0A, 11360-4BA0B

    • Upper Torque Damper Link: 11350-4BA0A

  • 2.5L Petrol (T32 / Rogue) OEM Reference:

    • RH Hydraulic Engine Mount: 11210-4BB0A, 11210-4BB0B

    • LH Transmission Mount: 11220-4BB0A, 11220-4BB0B

    • Rear Lower Torque Rod Mount: 11360-4BA0A

  • Popular Aftermarket Brands: Yamato, Febest, JIKIU, Tenacity, RBI, and Hardrace.

Reviews

There are no reviews yet.

Be the first to review “Nissan Xtrail NT32 Engine Mountain”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)