Nissan Xtrail NT32 Engine Mountain

(0 Reviews) Write a review
System Configuration
The Nissan X-Trail NT32 utilizes a 4-point modular powertrain suspension layout designed to handle heavy torque transfer across the intelligent 4WD layout.
  • Front Mount: Controls initial lateral torque reaction.
  • Rear Mount (Torque Strut): Manages engine pitch, rollback, and longitudinal twist under hard acceleration.
  • Right Hand (RH) Mount: Primary engine weight-bearing component.
  • Left Hand (LH) Mount: Primary transmission/CVT housing support.
Material & Engineering Specifications
  • Isolator Type: Hybrid dampening configuration. The primary load-bearing engine mount (RH) utilizes a fluid-filled hydraulic core to cancel out high-frequency idle harmonics. The remaining mounts rely on high-density vulcanized rubber-to-metal bonding.
  • Housing Composition: Stamped high-tensile structural steel base brackets combined with lightweight die-cast aluminum upper brackets (RH side) for mass reduction.
  • Dampening Fluid Chemistry: High-viscosity ethylene glycol based compound sealed within dual pressure chambers (RH side only).
  • Average Component Weights:
    • RH Hydraulic Assembly: ~2.10 kg
    • LH Gearbox Assembly: ~1.85 kg
    • Rear Torque Link: ~0.95 kg

Genuine OEM Part Numbers & Cross-References
(Note: These apply specifically to the NT32 4WD platform paired with the MR20DD 2.0L engine or QR25DE 2.5L engine configurations)
  • Right Hand (RH) Engine Mount: 11210-4BA0A, 11210-4BU0A
  • Left Hand (LH) Transmission Mount: 11220-4BA0A
  • Rear Engine Torque Mount: 11360-4BA0A
  • Front Engine Mount: 11350-4BA0A
Platform Compatibility
  • Chassis Run: T32/NT32 Platform Series
  • Drivetrain Constraints: Tailored specifically for all-wheel-drive/four-wheel-drive layouts (NT32) to absorb additional transfer case and propeller shaft vibrations.

KSh8,000.00

In stock
Buy now

Description

Product Description: Nissan X-Trail (NT32 / T32 Chassis, 2013–2021) Engine & Transmission Mounting Kit (4-Piece Set)

Overview

The Engine & Transmission Mounting Kit for the Nissan X-Trail (T32 / NT32 Chassis 3rd Generation, 2013–2021 with 2.0L MR20DD & 2.5L QR25DE Engines, 2WD & 4WD) is a complete 4-piece replacement set engineered to restore factory powertrain alignment, eliminate cabin vibrations, and ensure smooth acceleration. Specially designed to manage the substantial torque output and engine rocking of Nissan’s 2.0L/2.5L engines paired with Xtronic CVT transmissions, this kit replaces hardened, cracked, or leaking original hydraulic mounts to restore executive SUV comfort and quietness.

Technical Specifications & Characteristics

  • Vehicle Compatibility: Nissan X-Trail (T32 2WD & NT32 4WD, 2.0L MR20DD / 2.5L QR25DE, 2013–2021) and Nissan Rogue (T32)

  • Set Composition (Complete 4-Piece Set):

    1. Right-Hand (RH / Engine Side) Upper Hydraulic Mount: Positioned on the timing cover side; supports primary engine weight and features an internal hydraulic fluid chamber to absorb vertical combustion shocks.

    2. Left-Hand (LH / Transmission Side) Mount: Positioned underneath the air box and battery tray area; secures the Xtronic CVT gearbox to the left chassis rail.

    3. Rear (Lower Torque Rod / Pitch Suppressor) Mount: Positioned underneath between the subframe and gearbox; controls fore-aft engine tilt under heavy acceleration and braking.

    4. Front Lower Torque Rod Mount: Secondary lower stabilizer rod controlling engine torque movement.

  • Material Construction: Lightweight cast aluminum housings and high-tensile stamped steel brackets fitted with high-durometer Natural Rubber (NR) and sealed hydraulic fluid chambers.

  • Fitment Type: Direct factory bolt-on replacement matching original subframe and chassis mounting points.

Key Features & Performance Benefits

  1. Eliminates Steering Wheel & Dashboard Vibration: Absorbs engine harmonic rumble, stopping steering wheel shake, dashboard buzzing, and floorboard vibration at idle in ‘D’ or ‘R’.

  2. Smooths CVT Acceleration & Shifting: Prevents engine and transmission tilt during throttle application, eliminating harsh lurching or clunking sounds when pulling away or accelerating.

  3. Restores Powertrain Alignment: Keeps the engine accurately positioned within the engine bay, protecting CV axle inner joints, exhaust flex pipes, and radiator hoses from stress.

  4. Hydraulic Vibration Isolation Technology: Utilizes OEM-spec hydraulic dampening in the upper right mount to absorb low-frequency 4-cylinder engine vibrations.

Variant & Fitment Notes (2.0L MR20DD vs. 2.5L QR25DE / 2WD vs. 4WD)

Important: While 2.0L (NT32) and 2.5L (T32) models share identical subframe mounting points, right-hand hydraulic engine mount brackets and rear torque rod bush dimensions differ slightly between engine variants:

  • Right-Hand (RH Engine) Hydraulic Mount OEM Reference:

    • 2.0L MR20DD: 11210-4BA0A, 11210-4BA0B, 11210-4CE0A

    • 2.5L QR25DE: 11210-4BB0A, 11210-4BB0B

  • Left-Hand (LH Transmission) Mount OEM Reference: 11220-4BA0A, 11220-4BA0B

  • Rear Lower Torque Rod OEM Reference: 11360-4BA0A, 11360-4CE0A

  • Front Lower Torque Rod OEM Reference: 11350-4BA0A

  • Popular Aftermarket Brands: Tenacity, Febest, Yamato, RBI, JIKIU, Anchor, and Hardrace.

    System Configuration
    The Nissan X-Trail NT32 utilizes a 4-point modular powertrain suspension layout designed to handle heavy torque transfer across the intelligent 4WD layout.
    • Front Mount: Controls initial lateral torque reaction.
    • Rear Mount (Torque Strut): Manages engine pitch, rollback, and longitudinal twist under hard acceleration.
    • Right Hand (RH) Mount: Primary engine weight-bearing component.
    • Left Hand (LH) Mount: Primary transmission/CVT housing support.
    Material & Engineering Specifications
    • Isolator Type: Hybrid dampening configuration. The primary load-bearing engine mount (RH) utilizes a fluid-filled hydraulic core to cancel out high-frequency idle harmonics. The remaining mounts rely on high-density vulcanized rubber-to-metal bonding.
    • Housing Composition: Stamped high-tensile structural steel base brackets combined with lightweight die-cast aluminum upper brackets (RH side) for mass reduction.
    • Dampening Fluid Chemistry: High-viscosity ethylene glycol based compound sealed within dual pressure chambers (RH side only).
    • Average Component Weights:
      • RH Hydraulic Assembly: ~2.10 kg
      • LH Gearbox Assembly: ~1.85 kg
      • Rear Torque Link: ~0.95 kg

    Genuine OEM Part Numbers & Cross-References
    (Note: These apply specifically to the NT32 4WD platform paired with the MR20DD 2.0L engine or QR25DE 2.5L engine configurations)
    • Right Hand (RH) Engine Mount: 11210-4BA0A, 11210-4BU0A
    • Left Hand (LH) Transmission Mount: 11220-4BA0A
    • Rear Engine Torque Mount: 11360-4BA0A
    • Front Engine Mount: 11350-4BA0A
    Platform Compatibility
    • Chassis Run: T32/NT32 Platform Series
    • Drivetrain Constraints: Tailored specifically for all-wheel-drive/four-wheel-drive layouts (NT32) to absorb additional transfer case and propeller shaft vibrations.

Reviews

There are no reviews yet.

Be the first to review “Nissan Xtrail NT32 Engine Mountain”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)