Passo 2018 Heavy Duty Coil Springs

(0 Reviews) Write a review
Core Metallurgical & Coil Geometry Specs
    • Coil Spring Design Profile: Cylindrical, Linear Rate Heavy-Duty Aftermarket Coil Spring configuration.
    • Wire Cross-Section Diameter (Thickness): 11.0 mm (Front Axle) | 10.5 mm (Rear Axle). Reinforced aftermarket specification; increased from standard factory stock wire to elevate load handling capability.
    • Spring Outer Diameter (Ø): 114 mm to 122 mm (Axle-position dependent).
    • Total Free Uncompressed Length (Height): 315 mm – 330 mm (Calibrated to maintain optimal unladen vehicle ride height and prevent sagging).
    • Total Active Coil Windings: 5.5 to 6.25 coils.
    • Material Composition: Induction-hardened 55CrSi High-Tensile Silicon-Chromium Spring Steel alloy, finished with an impact-resistant, anti-corrosion gloss powder coating layer.

Functional Suspension Dynamics & Performance Ratings
    • Spring Load Rate Classification: Heavy-Duty / Reinforced Cargo & Rough-Road Specification.
    • Spring Stiffness Constant (Rate): 24 N/mm (Front) | 21 N/mm (Rear). Engineered with a 25% to 35% increase in load-bearing stiffness compared to the highly compliant factory JDM setup.
    • Primary Mechanics Profile: Specifically calibrated to eliminate rear-end sagging under full passenger load or cargo capacity, minimize vehicle body roll during cornering transitions, and maximize ground clearance over uneven road infrastructure.

Target Chassis Code Applications
    • Toyota Platform Series: Third-Generation Toyota Passo (M700A 2WD / M710A 4WD series).
    • Cross-Platform Daihatsu Twin: Directly cross-compatible with the corresponding Daihatsu Boon (M700S / M710S) chassis platform configuration of identical production years.

Industry Cross-References & Manufacturer Part Bases
    • Toyota Factory Standard Base Part Roots (For dimensional reference): 48131-B1230 (Front) | 48231-B1130 (Rear).
    • Premium Aftermarket Heavy-Duty/Performance Alternatives:
        • Cobra Springs Heavy-Duty Series: Specialized reinforced performance specification matrices matching M700 chassis parameters [inferred].
        • OBK (Osaka Bane Inc.) Heavy-Duty Coil: Blue-painted reinforced aftermarket catalog series.
        • Lesjöfors / Kilen Reinforced Reference: Heavy-duty alternate variant series optimized for enhanced cargo capabilities.

KSh10,000.00

In stock
Buy now

Description

Product Description: Toyota Passo / Daihatsu Boon (M700A / M710A Chassis, 2016–Present / 2018 Model Year) Heavy-Duty Rear Coil Springs

Overview

The Heavy-Duty Rear Coil Spring Set for the 2018 Toyota Passo & Daihatsu Boon (M700A 1.0L FWD / M710A 1.0L 4WD, 2016–Present) is an upgraded rear suspension component engineered to increase load capacity, eliminate rear-end sagging, and preserve proper vehicle ride height. Specially designed for drivers who frequently carry full passenger loads, heavy boot luggage, or operate over uneven and rough road conditions, these heavy-duty springs provide firm chassis support and prevent bottoming out compared to softer factory-standard springs.

Technical Specifications & Characteristics

  • Vehicle Compatibility: 2018 Toyota Passo / Daihatsu Boon (M700A FWD & M710A 4WD Chassis, 1.0L 1KR-FE Engine, 2016–Present)

  • Position: Rear Axle (Left & Right Matched Pair)

  • Design Type: Heavy-Duty (HD) Progressive / Variable-Rate Coil Spring

  • Wire Thickness: Upgraded high-tensile spring steel wire gauge (approx. 0.5 mm to 1.2 mm thicker than original factory OEM wire spec)

  • Material & Finish: Cold-wound, heat-treated high-stress alloy steel with a durable anti-corrosion powder-coated finish to resist rust, salt, and stone chipping.

  • Fitment Type: Direct drop-in replacement into original upper and lower rubber spring isolators without modifying rear trailing arms or body mounts.

Key Features & Performance Benefits

  1. Prevents Rear Sagging & Squat: Keeps the vehicle level when fully loaded with passengers or cargo, maintaining correct headlight beam orientation and front tire grip.

  2. Eliminates Bottoming Out: Increased load rating prevents rear bump stops from slamming against the chassis over speed bumps, potholes, and rough terrain.

  3. Improved High-Speed Stability: Reduces rear-end sway, body roll during sharp turns, and floating sensations when driving at highway speeds.

  4. Enhanced Fatigue Resistance: Premium heat-treated steel construction resists sagging or tension loss over time, far outlasting standard light-duty factory springs.

Variant & Fitment Notes (2WD vs. 4WD)

Because 2WD (FWD – M700A) and 4WD (M710A) models feature different rear axle configurations, coil spring free-length and load ratings differ slightly between drivetrains:

  • Toyota / Daihatsu OEM Cross-Reference (FWD M700A): 48231-B1080, 48231-B1090, 48231-B1100

  • Toyota / Daihatsu OEM Cross-Reference (4WD M710A): 48231-B1110, 48231-B1120

  • Popular Aftermarket Brands: OBK (Osaka Bane), NHK, KYB K-Flex, Lesjöfors, and Suplex.

Reviews

There are no reviews yet.

Be the first to review “Passo 2018 Heavy Duty Coil Springs”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)