Suzuki Alto 2015 Driveshaft

(0 Reviews) Write a review
Core Spline & Toothing Geometry

  • External Toothing (Wheel/Hub Side): 23 teeth
  • External Toothing (Differential Side): 22 teeth
  • Internal Toothing (Inner Wheel-Side CV Joint): 19 teeth (varies up to 20 teeth on some HA36 versions)
  • ABS Ring Tooth Count: 43 teeth [1, 2, 3, 4]
Physical Dimensions & Hardware

  • Overall Length (Left / Short Side Compressed): 638 mm to 662 mm
  • Overall Length (Right / Long Side Compressed): 837 mm
  • Outboard Joint Thread Size (Hub Nut): M18 x 1.5
  • Seal Ring Diameter (Wheel Side): 49 mm
  • Drive Shaft Seal ID (Inner): Left Side: 38 mm | Right Side: 40 mm
  • Joint Configuration: Tripod-type inboard joint with a ball-type outboard CV joint. [1, 2, 3, 4]
OEM Part Numbers & Compatibility

  • Front Passenger Side (Left) OEM Numbers: 44102-74P00, 44102-74P02
  • Inner CV Joint OEM Reference: 44117-84330-002
  • Platform Sharing: Components maintain structural layout sharing with matching-era Suzuki Wagon R (MH55S) and Alto Lapin (HE33S) platforms.[1, 2]

KSh5,000.00

In stock
Buy now

Description

Product Overview

The Front Driveshaft (Constant Velocity / CV Axle Assembly) is a precision drivetrain component engineered to transmit rotational power from the transmission differential directly to the front wheel hubs of the Suzuki Alto kei car. Designed specifically for Suzuki’s lightweight HA36S platform, these compact yet robust assemblies ensure smooth power delivery, wide steering articulation angles, and reliable torque transfer for daily urban commuting and high-frequency stop-and-go driving.

Key Technical Specifications

(Standard specifications for Suzuki Alto HA36S front driveshaft assemblies):

  • Fitting Position: Front Axle (Available separately for Left [Passenger] Side and Right [Driver] Side; inner and outer spline counts, as well as compressed length, vary depending on whether the vehicle is equipped with a 5-speed manual, automated manual [AGS], or CVT transmission, and whether it is 2WD [FF] or 4WD).

  • Compatibility: Fits Suzuki Alto and Alto Turbo RS / Works models (HA36S / HA36V platforms, model year 2015, powered by the R06A 0.66L naturally aspirated or turbocharged 3-cylinder engines).

  • Design Type: Complete assembly featuring an inboard tripod joint, a high-strength solid steel shaft bar, an outboard Rzeppa (CV) joint, integrated ABS tone rings, and heavy-duty rubber boots.

Material & Build Quality

  • Shaft Material: Forged from high-tensile alloy steel engineered to handle the torsional twist and dynamic load-bearing demands of city driving without flexing under acceleration.

  • Joint Precision: Precision-machined internal cages, races, and hardened steel ball bearings designed to minimize friction, operating heat, and wear during tight urban steering maneuvers.

  • Boot & Grease Protection: Fitted with tear-resistant thermoplastic or neoprene rubber boots packed with high-temperature molybdenum disulfide grease to permanently seal out water, road salt, mud, and debris.

OEM & Cross-Reference Part Numbers

  • Suzuki OEM Reference Numbers:

    • Right Side (Driver): 44101-74P00, 44101-74P10 (or platform-specific regional JDM variants)

    • Left Side (Passenger): 44102-74P00, 44102-74P10 (or platform-specific regional JDM variants)

  • Popular Aftermarket Brands: GSP, HDK, Febest, NTY, and Pitwork.

Function & Importance

  1. Power Transmission: Efficiently transfers engine and transmission output to the front wheels to drive the vehicle forward or in reverse.

  2. Suspension & Steering Flexibility: Accommodates the vertical travel of the front MacPherson strut suspension while allowing the wheels to pivot sharply left or right without interrupting power flow.

  3. Braking & Stability Feedback: Interfaces directly with ABS wheel-speed sensors to ensure accurate data tracking for anti-lock braking and stability control systems.

Common Signs of a Worn or Failing Driveshaft on a 2015 Suzuki Alto

When CV joints degrade or protective boots tear due to age, wear, or road debris, your Alto will typically display these warning signs:

  • Clicking or Popping Noises: A rhythmic clicking or snapping sound coming from the front end that accelerates when making tight turns (such as navigating parking spaces or making U-turns).

  • Vibration Under Acceleration: A noticeable shudder or shaking felt through the steering wheel or floorboard when pressing the gas pedal, which generally smooths out when coasting.

  • Torn Boot / Grease Splatter: Thick black grease thrown onto the inside of the front wheel rim or lower control arm, indicating a split CV boot that leaves the internal joint exposed to contaminants.

  • Clunking When Shifting: A sharp metallic clunk when shifting between Reverse and Drive due to excessive internal joint play.

Reviews

There are no reviews yet.

Be the first to review “Suzuki Alto 2015 Driveshaft”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)