Toyota Fielder Model 2005 Engine Mountain

(0 Reviews) Write a review
Toyota Corolla Fielder (2005) Engine Mount Technical Specifications

The 2005 Toyota Corolla Fielder (First Generation, E120 series; chassis codes like NZE121G, ZZE122G, CE121G) features a 4-point engine mounting matrix (front, rear, right/passenger side, and left/driver side transmission mount). The design uses a combination of liquid-filled hydro-elastic dampeners and vulcanized rubber isolators to support transverse engine layouts. [1, 2, 3]
1. Component Breakdown & Factory Part Numbers

  • Right-Hand Side (RH) Engine Mount:
    • Type: Hydraulic-insulator cushion assembly (fluid-filled to isolate low-frequency engine block vibration at idle).
    • OEM Reference: 12305-21130 / 12305-21160 (Engine type: 1NZ-FE 1.5L). [1, 2]

  • Left-Hand Side (LH) Transmission Mount:
    • Type: Transverse rubber-to-metal isolator assembly supporting the gearbox housing shell.
    • OEM Reference: 12372-22080 / 12372-21110. [1]

  • Rear Engine Torque Mount:
    • Type: Anti-torque roll rubber bush stabilizer (controls forward/backward engine pitching under acceleration/braking forces).
    • OEM Reference: 12371-22170 (2WD layouts) or 12371-28070 (Diesel CE121 variants). [1, 2, 3]

  • Front Engine Stop Mount:
    • Type: Longitudinal movement restrictor.
    • OEM Reference: 12361-21020. [1]

2. Engineering & Material Standards

  • Structural Housing Material: Cold-rolled heavy-gauge carbon steel framing coupled with die-cast aluminum sub-brackets.
  • Elastomeric Element: High-tensile vulcanized natural rubber (NR) specialized to optimize shore hardness against under-hood heat cycles.
  • Standard Fastening Threads: Metric coarse thread matrix (predominantly M10 × 1.25 body frame bolts and M12 × 1.25 engine bracket anchoring studs). [1]
3. Application Variations by Engine Type

  • 1NZ-FE (1.5L Petrol) / 1ZZ-FE (1.8L Petrol): Share lightweight aluminum engine bracket configurations interacting with fluid-dampened RH engine bays. [1, 2, 3]
  • 3C-E (2.2L Diesel Variant – CE121G): Employs distinct high-durometer solid rubber compound mounts with upgraded metal frame thickness to isolate standard high-torque diesel harmonic vibrations. [1, 2]

KSh4,000.00

In stock
Buy now

Description

Product Description: Toyota Corolla Fielder / Axio / RunX (NZE121 & ZZE122 Chassis, 2005 Model Year) Engine & Transmission Mounting Kit (4-Piece Set)

Overview

The Engine & Transmission Mounting Kit for the 2005 Toyota Corolla Fielder Wagon (NZE121 1.5L 1NZ-FE & ZZE122 1.8L 1ZZ-FE, 120-Series Facelift, 2WD Models) is a complete 4-piece replacement set engineered to support the powertrain, eliminate cabin vibrations, and preserve smooth gear shifting. Designed to isolate dynamic engine combustion shocks and transmission torque from the unibody frame, this kit replaces hardened, cracked, or fluid-leaking factory rubber mounts to restore factory-smooth idling and quiet driving comfort.

Technical Specifications & Characteristics

  • Vehicle Compatibility: 2005 Toyota Corolla Fielder Wagon (NZE121 1.5L 2WD & ZZE122 1.8L 2WD)

    • (Also cross-fits 120-series Corolla Sedan, Corolla RunX / Allex hatchbacks, and Platz / Premio NZT240 sharing 1NZ/1ZZ powertrain layouts).

  • Powertrain Compatibility: 1.5L 1NZ-FE DOHC VVT-i and 1.8L 1ZZ-FE DOHC VVT-i engines paired with 4-Speed Automatic (U340E / U341E) or 5-Speed Manual (C50) Transmissions.

  • Set Composition (Complete 4-Piece Set):

    1. Right-Hand (RH / Engine Side) Hydraulic Mount: Positioned on the engine timing cover side; supports primary engine weight and features an internal oil-filled hydraulic chamber to dampen high-frequency vertical engine vibrations.

    2. Left-Hand (LH / Transmission Side) Mount: Positioned under the air filter intake box and battery tray; secures the gearbox casing directly to the left frame rail.

    3. Rear Lower Engine Mount (Pitch Suppressor / Stopper): Positioned underneath between the front subframe crossmember and transmission bellhousing; controls fore-aft engine rocking during throttle acceleration and hard braking.

    4. Front Lower Engine Mount (Torque Rod): Positioned at the front lower subframe crossmember; stabilizes longitudinal powertrain movement under load changes.

  • Material Construction: Heavy-duty cast aluminum housings, stamped structural steel mounting brackets, high-durometer Natural Rubber (NR) compounds, and sealed hydraulic fluid dampening chambers.

  • Fitment Type: Direct factory bolt-on fitment using original subframe and unibody frame mounting locations.

Key Features & Performance Benefits

  1. Eliminates Dashboard Shudder & Steering Wheel Vibration: Absorbs low-frequency engine rumbles, stopping steering wheel buzz, dashboard rattling, and cabin shudder when idling in ‘D’ or stopped at traffic lights.

  2. Smooths Throttle Engagement & Gear Shifts: Prevents engine and transmission tilt under load, eliminating heavy thumps, drivetrain lurching, or jerking when pressing the accelerator pedal.

  3. Protects CV Axles & Exhaust Plumbing: Holds the powertrain in precise factory alignment, protecting inner CV axle joints, boot seals, and exhaust flex pipes from excessive mechanical twisting stress.

  4. Hydraulic Vibration Isolation: Features an OEM-spec hydraulic fluid chamber inside the primary upper right engine mount to absorb severe road impacts and high-frequency engine harmonics before they reach the cabin.

Variant & Fitment Notes (1.5L NZE121 2WD vs. 1.8L ZZE122 2WD vs. 4WD NZE124/ZZE124)

Important: While 1.5L (NZE121) and 1.8L (ZZE122) 2005 Fielder models share identical front and rear lower stopper mounts, the right-hand hydraulic engine mount bracket offset differs between 1NZ-FE (1.5L) and 1ZZ-FE (1.8L) engine blocks, as well as between 2WD and 4WD (NZE124 / ZZE124) chassis setups:

  • 1.5L 2WD (NZE121 / 1NZ-FE) OEM Reference:

    • RH Hydraulic Engine Mount: 12305-21020, 12305-21060

    • LH Transmission Mount: 12372-21070, 12372-0D050

    • Rear Lower Mount: 12371-21020, 12371-0D050

    • Front Lower Mount: 12361-21020, 12361-0D040

  • 1.8L 2WD (ZZE122 / 1ZZ-FE) OEM Reference:

    • RH Hydraulic Engine Mount: 12305-22140, 12305-0D020

    • LH Transmission Mount: 12372-22070, 12372-0D050

  • Popular Aftermarket Brands: Yamato, Febest, JIKIU, Tenacity, RBI, Hardrace, and Anchor.

Reviews

There are no reviews yet.

Be the first to review “Toyota Fielder Model 2005 Engine Mountain”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)