Toyota G Touring Steering Rack

(0 Reviews) Write a review
Core Engineering Specifications

  • Steering Gear Type: Rack and Pinion
  • Operating Mode: Hydraulic Power Steering (HPS)
  • Drive Layout: Right-Hand Drive (RHD) default configuration (LHD aftermarket cross-references available)
  • Total Assembly Length: Approximately 955 mm
  • Net Weight: 6.9 kg to 7.2 kg [1, 2, 3, 4, 5]
Hardware & Interface Dimensions

  • Input Shaft Pinion Diameter: 17.3 mm
  • Input Shaft Splines: 36 teeth
  • Input Shaft Connector Type: Toothed / Splined
  • Tie Rod Thread Connection: Female tierods / inner rack end configuration [1]
Installation Torque Specifications

  • Rack Guide Spring Cap / Lock Nut: 70 N·m (51 ft-lbf)
  • Rack Housing End Cap: 60 N·m (43 ft-lbf)
  • Turn Pressure Tubes / Lines: 13.5 N·m to 15 N·m (10 to 11 ft-lbf)
  • Fluid Lubricant Type: Dexron II / III Automatic Transmission Fluid (ATF) / Power Steering Fluid [1]
Part Numbers & Platform Compatibility

  • OEM Part Numbers: 44250-12530, 44250-12400, 44250-12480, 44250-12330
  • Chassis Platform Sharing: Directly interchangeable within the E100/E110 platform ecosystem, including the Toyota Corolla Sedan/Wagon (AE100, AE101, AE110), Corolla L Touring, and Sprinter variants. [1, 2, 3, 4]

KSh20,000.00

In stock
Buy now

Description

Product Overview

The Steering Rack Assembly is the primary mechanical steering mechanism for the Toyota Corolla G Touring station wagon. Utilizing a robust rack-and-pinion configuration equipped with Hydraulic Power Steering (HPS) assist, this assembly converts the rotational movement of the steering wheel into the exact lateral motion required to turn the front wheels. Engineered specifically for the Corolla wagon platform, it balances light urban maneuverability with stable tracking under payload weight.

Key Technical Specifications

(Standard specifications for the Toyota Corolla G Touring steering rack):

  • Fitting Position: Front Axle (Subframe-mounted steering gear housing complete with inner tie rods, threaded outer ends, fluid ports, and protective dust boots)

  • Compatibility: Fits Toyota Corolla G Touring wagon models (typically spanning late AE100, AE104 [4WD], and EE102/EE103/CE102 platform variants, powered by 5A-FE, 4A-FE petrol or 3C/2C diesel engines, paired with manual or automatic transmissions).

  • Design Type: Hydraulic rack-and-pinion steering gear housing featuring integrated inner tie rod ball joints, high-pressure fluid inlet/outlet lines, and heavy-duty rubber accordion bellows boots.

Material & Build Quality

  • Gear & Shaft Construction: Precision-machined, induction-hardened high-tensile alloy steel steering shaft and rack teeth engineered to withstand high wear, heavy utility use, and frequent steering lock cycles.

  • Housing Construction: Heavy-gauge cast iron and reinforced alloy housing designed to deliver high structural rigidity and resist mechanical flex under load.

  • Seals & Bellows: Fitted with weather-resistant neoprene rubber bellows boots and high-pressure internal hydraulic seals designed to handle system fluid pressure while keeping out water, dust, and road salt.

OEM & Cross-Reference Part Numbers

  • Toyota OEM Reference Numbers:

    • 44250-12320, 44250-1A240, 44250-12400 (or platform-specific regional JDM variants)

  • Popular Aftermarket Brands: Kayaba (KYB), GSP, TRW, Febest, and certified Ex-Japan OEM assemblies.

Function & Importance

  1. Directional Control: Directly translates steering wheel turns into precise left-and-right front wheel articulation.

  2. Hydraulic Power Assist: Operates alongside the engine-driven power steering pump to provide light, effortless turning at low speeds while retaining solid road feedback at cruising speeds.

  3. Alignment Anchorage: Serves as the structural connection link bridging the steering column to the front wheel steering knuckles via the inner and outer tie rod ends.

Common Signs of a Worn or Failing Steering Rack on a G Touring Wagon

Due to age, high mileage, and commercial or family hauling duties, a failing steering rack will typically display these warning signs:

  • Clunking, Knocking, or Rattling Noises: A sharp metallic snap or dull rattle from the front floorboard when rotating the steering wheel from side to side or driving over rough patches.

  • Loose or “Playful” Steering: Excessive free-play or a delayed “dead zone” in the steering wheel before the vehicle actually begins to change direction.

  • Power Steering Fluid Leaks: Red or brown fluid pooling beneath the front end, wet or oil-soaked rubber bellows boots, or whining noises from the power steering pump due to fluid loss.

  • Stiff or Binding Steering: Difficulty turning the steering wheel smoothly, pointing to internal valve restriction or gear degradation.

Reviews

There are no reviews yet.

Be the first to review “Toyota G Touring Steering Rack”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)