Toyota Noah Rear Airmartic

(0 Reviews) Write a review
Factory Architecture & Mechanical Blueprint
  • Standard Rear Layout: The factory-standard Toyota Noah (across generations AZR60, ZRR70, ZRR80, and MZRA90) utilizes a Torsion Beam rear suspension system paired with standalone, low-pressure gas-charged shocks and conventional steel coil springs. [1, 2]
  • The “Airmatic” Classification: The Toyota Noah does not feature a factory-optioned electronic pneumatic air suspension (“Airmatic”) system. When a Noah configuration operates on air bellows, it is utilizing an aftermarket, complete Air Ride Modification / Air Bag Conversion Kit (such as specialized JDM systems by CEIKA Air Ride or custom high-pressure pneumatic double bellows). [1, 2]
Aftermarket Air Bag / Pneumatic Conversion Kit Specifications
For Noah platforms modified with an electronic air sleeve system, the conversion hardware follows these strict mechanical limits:
  • Spring Mechanism Replacement: Steel rear coil springs are removed and substituted with High-Pressure Double-Bellows Progressive Rate Air Sleeves. [1]
  • Maximum Height Adjustment Range (Stroke): Up to a 125 mm body drop/lift capacity managed dynamically via a dedicated manifold air management computer. [1]
  • Damper Compatibility: Tuned to run alongside either threaded, adjustable-length short-stroke performance dampers or factory-specification standalone rear dampers (such as the standard KYB Excel-G 3440109 Series). [1, 2]
  • Airbag Operational Pressure Parameters:
    • Minimum safe driving threshold: 35 PSI to 50 PSI (prevents bottoming out under light vehicle loads).
    • Maximum heavy-load working pressure: 110 PSI to 125 PSI (configured to handle maximum vehicle payload metrics up to the factory gross weight bounds). [1, 2]

Factory Rigid Rear Chassis & Anchoring Points
Whether retaining steel coils or hosting a custom pneumatic bellows block, the core tracking geometry rests on the following factory dimensions:
  • Rear Axle Assembly Type: Non-independent trailing-arm layout integrated via a rigid Rear Axle Beam Assembly.
  • Shock Mount Interface: Symmetrical standalone Bottom Eyelet sleeve cross-bolts mated directly to the axle carrier arms, paired with isolated upper chassis bushing support assemblies.
  • Factory Genuine Rear Damper Part Numbers (For cross-referencing mount clearance): 48530-28560, 48530-80547, 48530-D1010. [1]

KSh40,000.00

In stock
Buy now

Description

Product Description: Toyota Noah (AZR60 / ZRR70 / ZRR80) Rear Air Suspension Kit / Airmatic Convertor Struts

Overview

The Rear Air Suspension Assembly (Airmatic / Air Bag Strut Kit) for the Toyota Noah & Voxy MPV (AZR60, ZRR70, ZRR80 Chassis, 2001–Present) is a specialized rear suspension upgrade or replacement unit designed to deliver superior load leveling, ride height adjustment, and maximum passenger comfort. Engineered to manage heavy passenger payloads or custom stance setups without rear-end sag, this assembly replaces conventional rear coil springs and standard shocks with heavy-duty air bellows paired with gas-charged dampeners.

Technical Specifications & Characteristics

  • Vehicle Compatibility: Toyota Noah / Toyota Voxy / Esquire (AZR60, AZR65, ZRR70, ZRR75, ZRR80, ZRR85, 2001–Present)

  • Position: Rear Axle (Left & Right specific or universal set)

  • System Type: Heavy-Duty Air Bag / Pneumatic Air Spring with Rear Shock Absorber Unit

  • Air Sleeve Material: Multi-ply reinforced neoprene rubber with high-tensile cord rings for pressure retention and burst resistance

  • Damping Medium: Nitrogen gas pressurized hydraulic damper to control rebound bounce and roll instability

  • Air Fitting Port: Standard 1/8″ NPT or DOT-approved quick-connect air line fitting

  • Working Pressure Range: Approx. 30 PSI to 120 PSI (adjustable based on load weight)

Key Features & Performance Benefits

  1. Automatic / Manual Load Leveling: Prevents rear-end squat and headlight misalignment when carrying full passenger capacity (7–8 seats) or heavy rear luggage.

  2. Adjustable Ride Comfort: Allows driver tuning between a soft, plush ride for highway cruising and a firmer setup for fully loaded transport or cornering stability.

  3. Eliminates Bottoming Out: Absorbs severe impacts over potholes, speed bumps, and rough road surfaces, protecting chassis components and bump stops.

  4. Direct Structural Fitment: Engineered to mount directly into factory upper and lower spring seats and lower trailing arm mounting brackets.

Variant & OEM Cross-Reference Notes

Note: The Toyota Noah factory suspension relies on standard coil springs and shocks (such as KYB 3440109). “Airmatic” or Air Suspension setups on the Noah are typically aftermarket conversions (e.g., Air Lift, RoamAir, Airrex) or custom OEM-style helper spring conversions.

  • Standard Shock Cross-Reference (for Air Helper setups): 48530-28670, 48530-28B60, 48531-80753

  • Popular Aftermarket Brands: RoamAir, Air Lift Performance, Airrex, K-Sport, and D2 Racing.

Reviews

There are no reviews yet.

Be the first to review “Toyota Noah Rear Airmartic”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)