Description
Product Description: Toyota Corolla NZE121 / NZE124 (120-Series Chassis, 2000–2006) Engine & Transmission Mounting Kit (4-Piece Set)
Overview
The Engine & Transmission Mounting Kit for the Toyota Corolla / Corolla Fielder / Corolla RunX / Allex (NZE121 1.5L 1NZ-FE 2WD & NZE124 1.5L 1NZ-FE 4WD, 120-Series Chassis, 2000–2006 with 4-Speed Automatic & 5-Speed Manual Transmissions) is a complete 4-piece replacement set engineered to support the powertrain, eliminate deep cabin vibrations, and preserve smooth gear shifting. Designed to isolate dynamic engine vibration and transmission torque from the unibody frame, this kit replaces hardened, cracked, or fluid-leaking factory rubber mounts to restore factory-smooth idling and quiet driving comfort.
Technical Specifications & Characteristics
-
Vehicle Compatibility: Toyota Corolla Sedan, Fielder Wagon, RunX / Allex Hatchback (NZE121 1.5L 2WD & NZE124 1.5L 4WD, 2000–2006)
-
(Also cross-fits Probox / Succeed NCP51 / NCP58 and Platz / Premio NZT240 sharing 1NZ powertrain layouts).
-
-
Powertrain Compatibility: 1.5L 1NZ-FE DOHC VVT-i Engine paired with 4-Speed Automatic (U340E / U340F) or 5-Speed Manual (C50) Transmissions.
-
Set Composition (Complete 4-Piece Set):
-
Right-Hand (RH / Engine Side) Hydraulic Mount: Positioned on the engine timing chain cover side; supports primary engine weight and features an internal oil-filled hydraulic chamber to dampen vertical engine vibrations.
-
Left-Hand (LH / Transmission Side) Mount: Positioned under the air filter housing and battery tray; secures the gearbox casing to the left frame rail.
-
Rear Lower Engine Mount (Pitch Suppressor / Stopper): Positioned underneath between the front subframe crossmember and transmission bellhousing; controls fore-aft engine rocking during acceleration and braking.
-
Front Lower Engine Mount (Torque Rod): Positioned at the front subframe crossmember; stabilizes longitudinal powertrain movement under load changes.
-
-
Material Construction: Heavy-duty cast aluminum housings, stamped structural steel mounting brackets, high-durometer Natural Rubber (NR) compounds, and sealed hydraulic fluid dampening chambers.
-
Fitment Type: Direct factory bolt-on fitment using original subframe and unibody frame mounting locations.
Key Features & Performance Benefits
-
Eliminates Dashboard Shudder & Steering Wheel Vibration: Absorbs low-frequency engine rumbles, stopping steering wheel buzz, dashboard rattling, and cabin shudder when idling in ‘D’ or stopped at traffic lights.
-
Smooths Throttle Engagement & Gear Shifts: Prevents engine and transmission tilt under load, eliminating heavy thumps, drivetrain lurching, or jerking when pressing the accelerator pedal.
-
Protects CV Axles & Exhaust Plumbing: Holds the powertrain in precise factory alignment, protecting inner CV axle joints, boot seals, and exhaust flex pipes from excessive mechanical twisting stress.
-
Hydraulic Vibration Isolation: Features an OEM-spec hydraulic fluid chamber inside the primary upper right engine mount to absorb severe road impacts and high-frequency engine harmonics before they reach the cabin.
Variant & Fitment Notes (1.5L NZE121 2WD vs. 1.8L ZZE122 2WD vs. 4WD NZE124)
Important: While 1.5L (NZE121) and 1.8L (ZZE122) 120-series Corolla models share identical front and rear lower stopper mounts, the right-hand hydraulic engine mount bracket offset differs between 1NZ-FE (1.5L) and 1ZZ-FE (1.8L) engine blocks:
-
1.5L 2WD (NZE121 / 1NZ-FE) OEM Reference:
-
RH Hydraulic Engine Mount:
12305-21020,12305-21060 -
LH Transmission Mount:
12372-21070,12372-0D050 -
Rear Lower Mount:
12371-21020,12371-0D050 -
Front Lower Mount:
12361-21020,12361-0D040
-
-
1.8L 2WD (ZZE122 / 1ZZ-FE – Reference Only):
-
RH Hydraulic Engine Mount:
12305-22140,12305-0D020
-
-
Popular Aftermarket Brands: Yamato, Febest, JIKIU, Tenacity, RBI, Hardrace, and Anchor.







There are no reviews yet.