Toyota Passo Model 2012 Engine Mountain

(0 Reviews) Write a review
1. Mechanical Layout & Component Breakdown
The 2012 model features a structural, multi-point isolation configuration split into three key positions to absorb vibration:
  • Right-Hand Mount (Front Right / Engine Side):
    • OEM Part Numbers: 12305-B1050 / 12305-B1051 / 12305-B1052
    • Function: Weight-bearing insulator assembly. Anchors the primary engine block structure to the right chassis frame rail. [1]

  • Left-Hand Mount (Front Left / Transmission Side):
    • OEM Part Numbers: 12306-B1030 / 12306-B1050
    • Function: Transmission casing insulator. Controls rotational torque loads generated through the drivetrain and transaxle.

  • Rear Torque Rod (Lower Engine Stabilizer):
    • OEM Part Numbers: 12309-B1060 (Rod Assembly) and 12321-B1040 (Mounting Bracket)
    • Function: Control link rod. Mounted directly to the vehicle lower cross-member subframe to constrain back-and-forth structural “rocking” or pitching during sudden throttle inputs. [1, 2]

2. Vehicle Structural Fitment
  • Engine Installation: Transverse alignment (East-West configuration)
  • Chassis & Powertrain Compatibility:
    • KGC30: 1.0L 3-cylinder Petrol (1KR-FE), Front-Wheel Drive (FWD)
    • KGC35: 1.0L 3-cylinder Petrol (1KR-FE), All-Wheel Drive (AWD)
    • NGC30: 1.3L 4-cylinder Petrol (1NR-FE), Front-Wheel Drive (FWD) [1, 2, 3]

3. Material Specifications
  • Core Material: Vulcanized natural rubber compound bonded to a stamped carbon steel and reinforced iron casting frame casing.
  • Damping Classification: Standard solid-core passive elastomeric rubber setup.

KSh4,000.00

In stock
Buy now

Description

An Engine Mount (also referred to as an engine mounting insulator or motor mount) for a 2012 Toyota Passo (XC30 series: KGC30, KGC35, or NGC30) secures the powertrain to the vehicle’s chassis while dampening vibrations and controlling engine torque.

Product Overview

  • Product Name: Engine Mount / Motor Mount / Engine Insulator Rubber

  • Vehicle Compatibility: 2012 Toyota Passo (2nd Generation, KGC30 / KGC35 / NGC30; also fits Daihatsu Boon)

  • Compatible Engines:

    • 1.0L 1KR-FE I3 Petrol

    • 1.3L 1NR-FE I4 Petrol

  • Material: Heavy-Gauge Steel Bracketry with High-Grade Natural Rubber (NR) / Hydraulic Core (RH mount)

  • Fitment Type: Direct OEM Replacement

Key Mounting Positions & OEM Part Numbers

A complete mounting set for the 2012 Toyota Passo consists of 3 distinct mounting points:

Mount Position Function OEM Part Numbers
Right-Hand (RH / Engine Front) Bears engine weight & absorbs main 3-cylinder engine idle vibration 12305-B1100 / 12305-B1101
Left-Hand (LH / Transmission Side) Secures the transmission housing to the left chassis frame rail 12306-B1080
Rear (Rear Lower Insulator / Torque Rod) Restrains engine rocking/torque movement under acceleration and braking 12321-B1040 / 12309-B1060

Key Features & Benefits

  • Tuned Vibration Isolation: Engineered specifically to dampen the low-frequency vibrations inherent to 3-cylinder 1KR-FE engines, ensuring a smooth, quiet cabin experience.

  • Exact OEM Specification: Designed to match original factory dimensions and mounting holes for seamless bolt-on replacement.

  • Thermal & Chemical Resistance: Features high-grade synthetic/natural rubber compound that resists cracking caused by engine heat cycles, road grime, and minor oil leaks.

  • Drivetrain Protection: Restores proper alignment of the driveshaft and CV axles, reducing wear on steering and transmission components.

Common Symptoms That Indicate Replacement Is Needed

  1. Excessive Steering Wheel & Cabin Shake: Strong vibrations while idling in “D” or “R” at a stoplight.

  2. Clunking Sound on Gear Change: A distinct “thump” or “clunk” when shifting between Park, Drive, and Reverse.

  3. Engine Movement: Visible engine jolting or heavy rocking back and forth when stepping on the gas or braking hard.

Reviews

There are no reviews yet.

Be the first to review “Toyota Passo Model 2012 Engine Mountain”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)