Toyota Passo Model 2013 Engine Mountain

(0 Reviews) Write a review
1. Mechanical Layout & Component Breakdown
The 2013 model employs a multi-point containment design to manage powertrain vibration, divided into three core positions: [1, 2]
    • Right-Hand Mount (Engine Side):
        • OEM Part Numbers: 12305-B1080 / 12305-B1050 / 12305-B1100
        • Function: Primary weight-bearing insulator assembly. Supports the cylinder block casing and dampens structural vibrations. [1, 2]

    • Left-Hand Mount (Gearbox / Transmission Side):
        • OEM Part Numbers: 12306-B1050 / 12306-B1080
        • Function: Gearbox housing insulator. Absorbs longitudinal and lateral loads generated during gear changes or CVT ratio shifts. [1, 2]

    • Rear Torque Rod (Lower Stabilization Link):
        • OEM Part Numbers: 12309-B1060 (Rod) and 12321-B1040 (Rear Bracket)
        • Function: Moving control torque rod. Attaches directly to the lower subframe to limit back-and-forth structural “rocking” under acceleration and braking. [1, 2, 3]

2. Vehicle Structural Fitment
    • Engine Installation: Transverse alignment (East-West layout)
    • Chassis Codes Covered:
        • KGC30: 1.0L 3-cylinder Petrol (1KR-FE), Front-Wheel Drive (FWD)
        • KGC35: 1.0L 3-cylinder Petrol (1KR-FE), All-Wheel Drive (AWD)
        • NGC30: 1.3L 4-cylinder Petrol (1NR-FE), Front-Wheel Drive (FWD) [1, 2]

3. Material Specifications
  • Core Material: High-elasticity natural rubber vulcanized directly onto stamped sheet steel and cast iron base frames.
  • Damping Classification: Passive, high-damping solid elastomeric rubber design (non-hydraulic setup for standard 1.0L configurations).

KSh4,000.00

In stock
Buy now

Description

An Engine Mount (often called engine mounting or motor mount) for a 2013 Toyota Passo (XC30 series: KGC30, KGC35, or NGC30) is a crucial structural component designed to hold the engine and transmission securely to the vehicle frame while isolating engine noise and vibration from the passenger cabin.

Product Overview

  • Product Name: Engine Mount / Motor Mount / Engine Mounting Insulator

  • Vehicle Compatibility: 2013 Toyota Passo (2nd Generation, KGC30 / KGC35 / NGC30; also compatible with Daihatsu Boon)

  • Compatible Engines:

    • 1.0L 1KR-FE I3 Petrol

    • 1.3L 1NR-FE I4 Petrol

  • Material: Heavy-gauge Stamped Steel / Cast Aluminum paired with High-Grade Natural Rubber (or Hydraulic/Fluid-filled core for RH mount)

  • Fitment Type: Direct OEM Replacement

Key Position Options & OEM Part Numbers

A complete set for a 2013 Toyota Passo generally consists of 3 distinct mounting units. Depending on which side you are replacing:

Mount Position Primary Function Common OEM Part Numbers
Right-Hand (RH / Engine Side) Supports engine weight & absorbs main engine idle vibrations 12305-B1100 / 12305-B1110 / 12305-B1013
Left-Hand (LH / Transmission Side) Secures transmission housing to the chassis frame rail 12306-B1080 / 12306-B1090
Rear (Rear Lower / Torque Rod) Restrains engine torque rotation during acceleration & braking 12321-B1040 / 12380-B1020

Key Features & Technical Specifications

  • Vibration Dampening: Custom-formulated rubber compound specifically tuned to absorb the characteristic low-frequency vibrations of the 3-cylinder 1KR-FE engine.

  • Direct Bolt-On Fit: Engineered to exact OEM factory dimensions and bolt hole alignments for seamless installation without modification.

  • Heat & Oil Resistant: Constructed using rubber additives that resist degradation from engine oil leaks, power steering fluids, and extreme engine bay thermal cycling.

  • Structural Durability: Reinforced steel brackets prevent engine sagging, ensuring proper alignment of CV axles and driveshafts.

Signs Your 2013 Toyota Passo Needs a New Engine Mount

  1. Heavy Idle Shaking: Excessive steering wheel, dashboard, or seat vibration when idling at a stoplight in “D” or “R”.

  2. Clunking Sound on Gear Shift: A loud “thump” or “clunk” when shifting between Park, Drive, and Reverse.

  3. Engine Movement: Noticeable engine jolting or rocking back and forth during sudden acceleration or braking.

Reviews

There are no reviews yet.

Be the first to review “Toyota Passo Model 2013 Engine Mountain”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)