Toyota Passo Model 2014 Engine Mountain

(0 Reviews) Write a review
1. Component Breakdown & OEM Part Numbers
The 2014 Toyota Passo utilizes a multi-point engine isolation setup: [1]
    • Right-Hand Mount (Front Right / Engine Side):
        • Part Number: 12305-B1110 (or 12305-B1052 depending on market frame)
        • Function: Primary insulator sub-assembly engine mounting RH. Holds engine weight and dampens rotational torque. [1, 2]

    • Left-Hand Mount (Front Left / Transmission Side):
        • Part Number: 12306-B1090 (or 12306-B1030 alternate code)
        • Function: Insulator sub-assembly engine mounting LH. Secures the gearbox housing to the frame. [1, 2]

    • Rear Torque Rod (Lower Engine Mount):
        • Part Number: 12309-B1110
        • Function: Rod sub-assembly engine moving control. Constrains the “pitching” or rocking motion of the engine during acceleration and gear shifts. [1]

2. Vehicle Structural Fitment
    • Engine Orientation: Transverse (East-West installation) [1]
    • Chassis Compatibility:
        • KGC30: 1.0L Petrol, FWD layout
        • KGC35: 1.0L Petrol, AWD layout
        • NGC30: 1.3L Petrol, FWD layout [1]

3. Material Specifications
    • Composition: High-damping natural rubber bonded to heavy-gauge stamped steel base frames.
    • Design Type: Solid rubber bushing inserts enclosed in cast/stamped metal brackets (non-hydraulic/passive dampening system).

KSh4,000.00

In stock
Buy now

Description

An Engine Mount (often called an engine mounting or motor mount) for a 2014 Toyota Passo (XC30 / KGC30 / KGC35 / NGC30 chassis) is a critical structural and vibration-dampening component that secures the engine and transmission to the car’s body subframe.

Product Overview

  • Product Name: Engine Mounting / Engine Motor Mount

  • Vehicle Compatibility: 2014 Toyota Passo (Compatible with 2nd Generation Models, 2010–2016)

  • Engine Models: 1.0L 1KR-FE (3-Cylinder) & 1.3L 1NR-FE (4-Cylinder)

  • Material: Heavy-Duty Steel/Cast Aluminum combined with High-grade Natural Rubber (NR) or Hydraulic Damping Fluid

  • Condition: Standard OEM replacement or Quality Aftermarket

OEM Part Numbers (Position Specific)

Note: A complete engine mount set for the 2014 Toyota Passo typically consists of 3 to 4 distinct mountings depending on the engine size and drivetrain (FWD vs 4WD).

  1. Right-Hand (RH / Engine Front Right Mount):

    • Part No: 12305-B1100 / 12305-B1110 (or 12305-B1010 / 12305-B1013)

    • Type: Often hydraulic/rubber, placed on the belt side of the engine to absorb high vertical vibrations.

  2. Left-Hand (LH / Transmission Mount):

    • Part No: 12306-B1080 / 12306-B1090

    • Type: Secures the transmission casing to the frame rail.

  3. Rear (Rear Lower Insulator / Torque Rod):

    • Part No: 12321-B1040 / 12380-B1020

    • Type: Prevents back-and-forth engine rotational torque movement during acceleration and braking.

Key Features & Benefits

  • Vibration Isolation: Specially formulated rubber absorbs high-frequency vibrations from the 3-cylinder 1KR-FE engine to keep the cabin quiet and smooth.

  • Drivetrain Stability: Holds the powertrain firmly aligned to protect drive shafts, exhaust piping, and transmission linkages from excessive stress.

  • Direct OEM Fit: Manufactured to original factory specifications for precise bolt-on installation without modifications.

  • Durable Construction: Resistance to oil, heat, weathering, and mechanical shear forces.

Common Symptoms That You Need a Replacement

  • Excessive shaking or vibration inside the cabin when idling or in “Drive” at a stoplight.

  • A noticeable “clunking” or “thumping” sound when shifting gears (e.g., from Park to Reverse or Drive).

  • Engine movement or jerking during heavy acceleration or sudden braking.

Reviews

There are no reviews yet.

Be the first to review “Toyota Passo Model 2014 Engine Mountain”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)