Toyota Passo Model 2015 Engine Mountain

(0 Reviews) Write a review
Engine & Performance Specifications

    • Engine Model: 1KR-FE (Alternatively available with the 1.3L 1NR-FE)
    • Displacement: 996 cc (1.0 Litre)
    • Cylinder Configuration: Inline 3-cylinder, 12-Valve
    • Valvetrain: DOHC (Double Overhead Camshaft)
    • Bore × Stroke: 71.0 mm × 83.9 mm
    • Compression Ratio: 11.5:1 (Upgraded in 2014 for higher thermal efficiency)
    • Maximum Power Output: 69 PS (51 kW) @ 6,000 RPM
    • Maximum Torque: 92 N·m (9.4 kg·m) @ 4,400 RPM [1, 2, 3, 4, 5, 6]

Drivetrain & Transmission

    • Transmission Type: Continuously Variable Transmission (CVT) [1, 2]
    • Drive System Configurations:
        • 2WD / Front-Wheel Drive (Chassis Model: KGC30)
        • 4WD / All-Wheel Drive (Chassis Model: KGC35) [1, 2, 3]

Engine Mounting Setup (Physical Mounts)

  • Mounting Configuration: 3-Point Insulator Isolation Setup [1]
  • Right-Hand (RH) Mount: Hydraulic (Fluid-filled) Insulator assembly to absorb 3-cylinder engine idling vibrations (OEM Base Part No: 12305). [1, 2]
  • Left-Hand (LH) Mount: Transmission-side rubber insulator bracket assembly (OEM Base Part No: 12306). [1]
  • Rear (RR) Mount: Engine moving control rod/rear structural engine stay to limit longitudinal engine twisting during acceleration (OEM Base Part No: 12380 / 12309). [1]

KSh4,000.00

In stock
Buy now

Description

Product Description: Toyota Passo / Daihatsu Boon (KGC30, KGC35, & NGC30 Chassis, 2015 Facelift Model Year) Engine & Transmission Mounting Kit (3-Piece Set)

Overview

The Engine & Transmission Mounting Kit for the 2015 Toyota Passo & Daihatsu Boon (2nd Gen Facelift KGC30 1.0L 2WD, KGC35 1.0L 4WD with 1KR-FE 3-Cylinder Engine, & NGC30 1.3L 2WD with 1NR-FE 4-Cylinder Engine) is a complete 3-piece replacement set engineered to stabilize the powertrain, eliminate severe cabin idling shudder, and preserve smooth gear transitions. Designed to isolate dynamic engine combustion pulses and transmission torque from the lightweight unibody frame, this kit replaces hardened, cracked, or fluid-leaking factory mounts to restore factory-smooth idling and quiet driving comfort.

Technical Specifications & Characteristics

  • Vehicle Compatibility: 2015 Toyota Passo (KGC30 1.0L 2WD, KGC35 1.0L 4WD, NGC30 1.3L 2WD) & Daihatsu Boon (M600S 1.0L 2WD, M610S 1.0L 4WD)

    • (Also cross-fits Toyota Passo 2nd Gen 2010–2016 production run sharing 1KR-FE / 1NR-FE mounting architecture).

  • Powertrain Compatibility: 1.0L 1KR-FE DOHC 12V 3-Cylinder & 1.3L 1NR-FE DOHC 16V Dual VVT-i 4-Cylinder engines paired with Super CVT-i Automatic Transmission.

  • Set Composition (Complete 3-Piece Set):

    1. Right-Hand (RH / Engine Side) Hydraulic Mount: Positioned on the timing chain cover side; supports primary engine weight and features an internal oil-filled hydraulic chamber tuned to cancel out 3-cylinder primary imbalances and vertical engine vibrations.

    2. Left-Hand (LH / Transmission Side) Mount: Positioned under the air cleaner housing and battery tray; secures the CVT gearbox casing directly to the left frame rail.

    3. Rear Lower Engine Mount (Pitch Suppressor / Torque Rod): Positioned underneath between the front subframe crossmember and transmission bellhousing; controls fore-aft engine rocking during throttle acceleration and deceleration.

  • Material Construction: Heavy-duty cast aluminum housings, stamped structural steel mounting brackets, high-durometer Natural Rubber (NR) compounds, and sealed hydraulic fluid dampening chambers.

  • Fitment Type: Direct factory bolt-on fitment using original subframe and unibody frame mounting locations.

Key Features & Performance Benefits

  1. Eliminates 3-Cylinder Idle Shudder & Vibration: Specially tuned rubber and hydraulic dampening elements absorb the pronounced low-frequency primary balance vibrations of the 1KR 3-cylinder engine, stopping steering wheel buzz, dashboard rattling, and door panel resonance.

  2. Smooths CVT Throttle Response: Prevents engine and transmission tilt under load, eliminating drivetrain thumps, lurching, or hesitation when pressing the accelerator pedal.

  3. Protects CV Axles & Exhaust Plumbing: Holds the compact powertrain in precise factory alignment, protecting inner CV axle joints, boot seals, and exhaust flex pipes from excessive mechanical twisting stress.

  4. Hydraulic Vibration Isolation: Features an OEM-spec hydraulic fluid chamber inside the primary upper right engine mount to absorb road shocks and high-frequency engine harmonics before they reach the cabin.

Variant & Fitment Notes (1.0L KGC30 2WD vs. 1.0L KGC35 4WD vs. 1.3L NGC30)

Important: While 1.0L KGC30 (2WD) and KGC35 (4WD) share identical rear pitch suppressors, the left-hand transmission mount bracket offset differs on 4WD variants due to transfer case casing clearance. Additionally, 1.3L 1NR-FE (NGC30) models utilize a distinct right-hand engine mount bracket profile:

  • 1.0L 2WD Models (KGC30 / 1KR-FE CVT) OEM Reference:

    • RH Hydraulic Engine Mount: 12305-B1020, 12305-B1030

    • LH Transmission Mount: 12372-B1010, 12372-B1020

    • Rear Lower Mount: 12361-B1010, 12361-B1020

  • 1.0L 4WD Models (KGC35 / 1KR-FE CVT) OEM Reference:

    • RH Hydraulic Engine Mount: 12305-B1020

    • LH Transmission Mount: 12372-B1030

    • Rear Lower Mount: 12361-B1010

  • 1.3L 2WD Models (NGC30 / 1NR-FE CVT) OEM Reference:

    • RH Hydraulic Engine Mount: 12305-B1050

  • Popular Aftermarket Brands: Yamato, Febest, JIKIU, Tenacity, RBI, Hardrace, and Anchor.

Reviews

There are no reviews yet.

Be the first to review “Toyota Passo Model 2015 Engine Mountain”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)