Description
Product Description: Toyota Passo / Daihatsu Boon (M700A & M710A Chassis, 2018 Model Year) Engine & Transmission Mounting Kit (3-Piece Set)
Overview
The Engine & Transmission Mounting Kit for the 2018 Toyota Passo & Daihatsu Boon (M700A 1.0L 2WD & M710A 1.0L 4WD, 3rd Generation with 1.0L 1KR-FE DOHC 3-Cylinder Engine) is a complete 3-piece replacement set engineered to stabilize the compact 3-cylinder powertrain, eliminate severe idle vibrations, and preserve smooth gear transitions. Designed to isolate dynamic engine combustion pulses and transmission torque from the lightweight unibody frame, this kit replaces hardened, cracked, or fluid-leaking factory mounts to restore factory-smooth idling and quiet driving comfort.
Technical Specifications & Characteristics
-
Vehicle Compatibility: 2018 Toyota Passo (M700A 2WD & M710A 4WD) & Daihatsu Boon (M700S 2WD & M710S 4WD)
-
(Also cross-fits Toyota Tank / Roomy M900A, Daihatsu Thor M900S, and Subaru Justy M900F sharing the 1KR-FE engine mounting architecture).
-
-
Powertrain Compatibility: 1.0L 1KR-FE DOHC 12V 3-Cylinder Petrol Engine paired with Super CVT-i Automatic Transmission.
-
Set Composition (Complete 3-Piece Set):
-
Right-Hand (RH / Engine Side) Hydraulic Mount: Positioned on the engine timing chain cover side; supports primary engine weight and features an internal oil-filled hydraulic chamber specifically tuned to cancel out 3-cylinder engine primary imbalances and high-frequency vertical vibrations.
-
Left-Hand (LH / Transmission Side) Mount: Positioned under the air cleaner assembly and battery tray; secures the CVT gearbox casing directly to the left frame rail.
-
Rear Lower Engine Mount (Pitch Suppressor / Torque Rod): Positioned underneath between the front subframe crossmember and transmission bellhousing; controls fore-aft engine rocking during throttle acceleration and sudden deceleration.
-
-
Material Construction: Lightweight cast aluminum housings, stamped structural steel mounting brackets, high-durometer Natural Rubber (NR) compounds, and sealed hydraulic fluid dampening chambers.
-
Fitment Type: Direct factory bolt-on fitment using original subframe and unibody frame mounting locations.
Key Features & Performance Benefits
-
Eliminates 3-Cylinder Idle Shudder: Specially tuned rubber and hydraulic dampening elements absorb the pronounced low-frequency primary balance vibrations inherent to 1KR 3-cylinder engines, stopping dashboard rattling and door panel buzzing.
-
Smooths CVT Throttle Response: Prevents engine and transmission tilt under load, eliminating drivetrain thumps, lurching, or hesitation when pressing the accelerator pedal.
-
Protects CV Axles & Exhaust Plumbing: Holds the compact powertrain in precise factory alignment, protecting inner CV axle joints, boot seals, and exhaust flex pipes from excessive mechanical twisting stress.
-
Hydraulic Dampening Technology: Features an OEM-spec hydraulic fluid chamber inside the primary upper right engine mount to absorb road shocks and engine harmonics before they transmit into the cabin.
Variant & Fitment Notes (2WD M700A vs. 4WD M710A)
Important: While 2WD (M700A) and 4WD (M710A) 2018 Passo models share identical right-hand hydraulic engine mounts and rear pitch suppressors, the left-hand transmission mount bracket offset differs on 4WD variants due to the transfer case casing position:
-
2WD Models (M700A / 1KR-FE CVT) OEM Reference:
-
RH Hydraulic Engine Mount:
12305-B1060,12305-B1080 -
LH Transmission Mount:
12372-B1050,12372-B1070 -
Rear Lower Mount:
12361-B1020,12361-B1040
-
-
4WD Models (M710A / 1KR-FE CVT) OEM Reference:
-
RH Hydraulic Engine Mount:
12305-B1060,12305-B1080 -
LH Transmission Mount:
12372-B1060 -
Rear Lower Mount:
12361-B1020,12361-B1040
-
-
Popular Aftermarket Brands: Yamato, Febest, JIKIU, Tenacity, RBI, Hardrace, and Anchor.






There are no reviews yet.