Toyota Passo Steering Rack

(0 Reviews) Write a review
Part Numbers & Identification

  • OEM Part Number (1st Gen – KGC10/QNC10): 45510-B1020
  • OEM Part Number (2nd Gen – NGC30/KGC30): 45502-B1094
  • OEM Part Number (Alternative Cross-References): 45502-B1010, 45502-B1012, 45502-B1020
  • Vehicle Compatibility: Toyota Passo (also shares assembly layout with Daihatsu Boon / Sirion)
  • Drive Configuration: Right-Hand Drive (RHD) [1, 2, 3]
System Specifications

  • Operating Mode: Electric Power Steering (EPS) / Manual Gear-type Rack (Assistance is managed via a column-mounted motor EPS system rather than a hydraulic rack)
  • Steering Gear Type: Rack and Pinion
  • Housing Material: Cast Aluminum and Structural Iron
  • Steering Rack End Thread Size: M14
  • Tie Rod End Thread Size: M12 x 1.25 [1, 2, 3]

KSh9,000.00

In stock
Buy now

Description

Product Overview

The Steering Rack Assembly is the core mechanical and electrical steering mechanism for the Toyota Passo compact hatchback. Utilizing a compact Electric Power Steering (EPS) rack-and-pinion design, this unit efficiently translates the driver’s steering inputs into the lateral movement required to turn the front wheels. Engineered specifically for Toyota and Daihatsu’s ultra-light urban platform, this assembly delivers feather-light maneuverability in tight parking spaces while maintaining steady, predictable control on city streets and highways.

Key Technical Specifications

(Standard specifications for Toyota Passo steering racks):

  • Fitting Position: Front Axle (Subframe-mounted steering gear housing complete with inner tie rods, threaded outer ends, and rubber dust boots)

  • Compatibility: Fits Toyota Passo hatchback models (including KGC30, NGC30, M700A, and M710A generations, powered by 1.0L 1KR-FE or 1.3L 1NR-FE engines, CVT automatic transmissions, in both 2WD and 4WD layouts). Note: Structurally shared with its sister platform, the Daihatsu Boon.

  • Design Type: Electrically assisted rack-and-pinion gear system featuring factory inner tie rod ball joints and heavy-duty accordion bellows boots.

Material & Build Quality

  • Gear & Shaft Construction: Precision-machined, induction-hardened high-tensile alloy steel rack teeth and steering shaft designed to endure thousands of city steering cycles without premature wear.

  • Housing Construction: Lightweight yet durable cast aluminum or heavy-gauge steel housing encasing the steering mechanism and EPS motor interface, engineered to minimize front-end weight and resist engine-bay thermal stress.

  • Seals & Bellows: Equipped with flexible, weather-resistant neoprene rubber bellows boots and multi-lip internal grease seals to permanently lock out moisture, road salt, mud, and grit.

OEM & Cross-Reference Part Numbers

  • Toyota / Daihatsu OEM Reference Numbers:

    • 45502-B1080, 45502-B1130, 45502-B1270 (or platform-specific regional JDM variants)

  • Popular Aftermarket Brands: Kayaba (KYB), GSP, Febest, NTY, and Pitwork.

Function & Importance

  1. Directional Control: Directly converts steering wheel turns into exact left-and-right wheel positioning.

  2. Speed-Sensitive Assist: Integrates with the vehicle’s electronic power steering system to provide effortless steering effort at low parking speeds and firmer weighted feedback at cruising speeds.

  3. Alignment Linkage: Serves as the robust structural bridge connecting the steering column to the front wheel knuckles via the tie rod assemblies.

Common Signs of a Worn or Failing Steering Rack on a Toyota Passo

Due to frequent urban stop-and-go driving and high-frequency steering locks, a failing steering rack will typically display these warning signs:

  • Clunking, Knocking, or Rattling Noises: A sharp metallic snap, pop, or dull rattle originating from the front floorboard when turning the steering wheel from side to side or driving over rough pavement.

  • Loose or “Dead” Steering Play: Excessive free-play or a noticeable delay in the steering wheel before the front tires actually respond.

  • Stiff, Binding, or Heavy Steering: Difficulty turning the steering wheel smoothly, or a complete loss of power assist accompanied by an EPS warning light on the dashboard.

  • Torn Bellows or Grinding: Ripped rubber dust boots allowing dirt inside the gear housing, which can cause a grinding sensation when steering.

Reviews

There are no reviews yet.

Be the first to review “Toyota Passo Steering Rack”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)