Toyota Premio 260 Steering Rack

(0 Reviews) Write a review
Core Engineering Specifications

  • Steering Gear Type: Rack and Pinion
  • Operating Mode: Electric Power Steering (EPS) with column-mounted or rack-integrated motor assistance
  • Drive Layout: Factory configured for Right-Hand Drive (RHD) setups
  • Lock-to-Lock Turns: Approximately 3.2 turns
  • Power Assist Mechanism: Electronic Actuator (Does not utilize hydraulic fluid, pumps, or pressure lines)
Hardware & Component Dimensions

  • Rack End / Tie Rod Inner Thread: M15 x 1.5
  • Tie Rod End Cross-Reference (555 Brand): SR-T360 / SE-T361
  • Boot Kit Code Hardware: 45535 (No.1 Boot) and 45536 (No.2 Boot)
  • Material Housing: Lightweight cast aluminum alloy shell with high-tensile steel internal rack shaft [1, 2]
Part Numbers & Platform Compatibility

  • Primary OEM Part Numbers: 45510-20100, 44200-28510
  • Chassis Code Coverage: Fits NZT260 (1.5L 1NZ-FE), ZRT260 (1.8L 2ZR-FE/FAE), ZRT261 (2.0L 3ZR-FAE), and 4WD variants (ZRT265).
  • Platform Sharing Architecture: Fully interchangeable with the T260-generation Toyota Allion (NZT260 / ZRT260) and shares geometric sub-assembly dimensions with the Toyota Premio/Allion T240 or Prius systems depending on localized revision cycles. [1, 2, 3, 4]

KSh18,000.00

In stock
Buy now

Description

Product Overview

The Steering Rack Assembly is the primary mechanical and electrical steering interface for the Toyota Premio T260 luxury sedan. Utilizing a responsive Electric Power Steering (EPS) rack-and-pinion configuration, this assembly efficiently translates the driver’s steering inputs into the exact lateral movement required to turn the front wheels. Engineered specifically for Toyota’s refined mid-size sedan platform, this unit delivers feather-light, effortless maneuverability during tight urban parking while maintaining reassuring stability and precise feedback at highway cruising speeds.

Key Technical Specifications

(Standard specifications for the Toyota Premio T260 steering rack):

  • Fitting Position: Front Axle (Subframe-mounted steering gear housing complete with integrated EPS motor/sensor module, inner tie rods, threaded outer ends, and protective dust boots)

  • Compatibility: Fits all second-generation Toyota Premio T260 models (NZT260, ZRT260, ZRT261, and ZRT265 platforms, production years 2007–2021, powered by 1.5L [1NZ-FE], 1.8L [2ZR-FAE], or 2.0L [3ZR-FAE] engines, paired with CVT automatic transmissions, in both Front-Wheel Drive [2WD] and Four-Wheel Drive [4WD] configurations).

  • Design Type: Electrically assisted rack-and-pinion steering gear system featuring factory inner tie rod ball joints and heavy-duty accordion bellows boots.

Material & Build Quality

  • Gear & Shaft Construction: Precision-machined, induction-hardened high-tensile alloy steel rack teeth and steering shaft designed to handle continuous daily driving forces and urban steering cycles without premature wear.

  • Housing Construction: Lightweight yet rigid cast aluminum and reinforced steel housing encasing the steering mechanism, engineered to minimize front-end weight while absorbing structural and thermal stress from the engine bay.

  • Seals & Bellows: Equipped with flexible, weather-resistant neoprene rubber bellows boots and multi-lip internal grease seals to permanently lock out moisture, road salt, mud, and abrasive grit.

OEM & Cross-Reference Part Numbers

  • Toyota OEM Reference Numbers:

    • 44250-20B10, 44250-20B20, 44250-20B50 (or platform-specific regional JDM variants)

  • Popular Aftermarket Brands: Kayaba (KYB), GSP, Febest, NTY, and Pitwork.

Function & Importance

  1. Directional Control: Directly converts steering wheel turns into exact left-and-right wheel positioning for precise navigation.

  2. Speed-Sensitive Power Assist: Integrates with the vehicle’s electronic power steering system to provide effortless steering effort at low parking speeds and firmer, weighted feedback at expressway speeds.

  3. Alignment Linkage: Serves as the robust structural bridge connecting the steering column to the front wheel knuckles via the inner and outer tie rod assemblies.

Common Signs of a Worn or Failing Steering Rack on a Premio 260

Due to high mileage, age, or frequent urban driving, a failing steering rack will typically display these warning signs:

  • Clunking, Knocking, or Rattling Noises: A sharp metallic snap, pop, or dull rattle originating from the front floorboard when turning the steering wheel from side to side or driving over rough pavement.

  • Loose or “Dead” Steering Play: Excessive free-play or a noticeable delay in the steering wheel before the front tires actually respond.

  • Stiff, Binding, or Heavy Steering: Difficulty turning the steering wheel smoothly, or a complete loss of power assist accompanied by an EPS warning light on the dashboard.

  • Abnormal Electronic Feedback or Vibration: Intermittent shuddering, twitching, or vibration transmitted through the steering wheel during low-speed maneuvers, indicating internal torque sensor or gear wear.

Reviews

There are no reviews yet.

Be the first to review “Toyota Premio 260 Steering Rack”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)