Description
Product Description: Toyota 1KR-FE 1.0L “Slim” Bare Engine Block Assembly (Ex-Japan Vitz / Passo / Belta / Tank)
Overview
The “Slim” Bare Engine Block Assembly (complete cylinder long-block unit, without external bolt-on accessories) for the Toyota 1KR-FE 1.0L DOHC 12-Valve VVT-i 3-Cylinder Petrol Engine is a high-grade, low-mileage Ex-Japan imported replacement unit. Specifically tailored for ultra-compact city hatchbacks including the Toyota Vitz (KSP90 2005–2010 & KSP130 2010–2020 Chassis) as well as matching 1.0L Toyota and Daihatsu models, this “slim” engine configuration offers an affordable, direct-fit solution to replace blown, overheated, or oil-consuming engines while reusing your original starter motor, alternator, intake manifold, throttle body, and wiring harness.
Technical Specifications & Characteristics
-
Engine Code: Toyota 1KR-FE (Designed and manufactured by Daihatsu)
-
Configuration: 1.0-Liter Inline 3-Cylinder, DOHC 12-Valve with Variable Valve Timing with intelligence (VVT-i)
-
Displacement: 998 cc (84.0 mm stroke × 71.0 mm bore)
-
Compression Ratio: 10.5:1 to 11.5:1 (depending on generation year)
-
Power Output Rating: ~68–70 hp @ 6,000 RPM | 92–94 Nm Torque @ 3,600 RPM
-
Engine Type Definition (“Slim / Bare Engine”): Includes the complete internal long-block assembly:
-
Cylinder block fitted with crankshaft, connecting rods, and pistons.
-
Complete cylinder head with valves, dual camshafts, and VVT-i gear unit.
-
Internal timing chain assembly, oil pump, water pump casing, and lower oil pan.
-
Excludes: Alternator, starter motor, A/C compressor, intake manifold, electronic throttle body, exhaust manifold/catalytic converter, ignition coils, and ECU/wiring harness.
-
-
Sourcing & Import Condition: Direct Ex-Japan import, low-mileage JDM unit, compression-tested across all three cylinders, oil-sump checked, and leak-inspected prior to supply.
Key Features & Performance Benefits
-
Cost-Effective Engine Replacement Solution: Saves significantly on acquisition costs by utilizing your vehicle’s existing, functional external electrical and fuel system components.
-
Restores Engine Power & Compression: Resolves chronic 3-cylinder engine oil burning, low compression, rough idling shudders, and bottom-end rod knocks caused by overheating.
-
Low-Mileage Ex-Japan Sourced: Sourced directly from Japanese domestic vehicles with documented service histories, ensuring minimal cylinder wall scoring and camshaft journal wear.
-
Direct Plug-and-Play Fitment: Standardized Toyota/Daihatsu block dimensions guarantee exact alignment with your original CVT or manual transmission bellhousing, engine mounts, and exhaust setup.
Vehicle Compatibility & Application Notes
Important: The 1KR-FE is a 3-cylinder engine widely used across Toyota, Daihatsu, and Subaru compact platforms. Ensure your vehicle uses the 3-cylinder 1KR-FE (1.0L) rather than the 4-cylinder 2SZ-FE / 1NR-FE (1.3L) variants:
-
Primary Toyota Vitz Applications:
-
Toyota Vitz 2nd Gen: KSP90 (2WD FWD, 2005–2010)
-
Toyota Vitz 3rd Gen: KSP130 (2WD FWD, 2010–2020)
-
-
Cross-Compatible Models (utilizing 1KR-FE 1.0L):
-
Toyota Passo: KGC10 / KGC15 (2004–2010), KGC30 / KGC35 (2010–2016), M700A (2016–Present)
-
Toyota Belta: KSP92 (2005–2012)
-
Toyota Tank / Roomy: M900A (2016–Present)
-
Daihatsu Boon / Sirion: M300S / M600S / M700S
-
Subaru Justy: M900F (2016–Present)
-
-
Fuel & Oil Requirements: 3.1 Liters of 0W-20 or 5W-30 Synthetic Blend Engine Oil; runs on standard unleaded petrol.







There are no reviews yet.