Sort

Honda Fit Sterbizer Links

KSh3,000.00
1st Generation: GD Chassis (2001–2008) Specs
  • Center-to-Center Stud Length: 299 mm – 300 mm (Standard 2WD) / 320 mm (4WD GD variants).
  • Total Structural Length: 325 mm (Standard 2WD) / 347 mm (4WD).
  • Thread Pitch Metric: M10 x 1.25 mm (Dual-end ball joints).
  • Joint Angular Joint Rotation: 112°.
  • OEM Reference Numbers: 51320-SAA-003 (Right Front), 51321-SAA-003 (Left Front).
  • Popular Aftermarket Alternative Cross-References: 555 Sankei SL-6340R, CTR CL0203. [1, 2, 3, 4, 5]
2nd Generation: GE Chassis / GP1 Hybrid (2009–2014) Specs
  • Center-to-Center Stud Length: 324.5 mm – 331 mm. [1, 2, 3]
  • Thread Pitch Metric: M10 x 1.25 mm or M10 x 1.5 mm depending on the specific assembly market. [1, 2]
  • Factory Structural Hardware Torque Specs:
    • Top Ball Stud Nut: 30 Nm (22 ft-lbs).
    • Bottom Ball Stud Nut: 38 Nm (28 ft-lbs). [1]
  • OEM Reference Numbers: 51320-TF0-003, 51321-TF0-003. [1, 2]
  • Popular Aftermarket Alternative Cross-References: 555 Sankei SL-H110, KYB KSLF4370. [1, 2]
3rd Generation: GK Chassis (2015–2020) Specs
  • Center-to-Center Stud Length: 349.25 mm (13.75 inches).
  • Thread Pitch Metric: M10 x 1.25 mm.
  • OEM Reference Numbers: 51320-T5A-003 (Right Front), 51325-T5A-003 (Left Front).
  • Popular Aftermarket Alternative Cross-References: Premium A-Premium MS608137, Moog K750838. [1, 2]
Core Material & Mechanism Specs
  • Link Rod Rod Composition: Heavy-duty carbon structural steel rods with an anti-corrosion zinc or phosphate surface plating finish. [1]
  • Ball Joint Internal Architecture: Highly polished carbon steel ball studs seated within structural self-lubricating polyoxymethylene (POM) inner sockets. [1]
  • Sealing Boot Mechanism: Heavy-duty, ozone-resistant chloroprene rubber dust covers sealed with steel retaining rings to entrap synthetic lithium grease.[1, 2]

Suzuki Alto Rear Drum

KSh6,500.00
Core Drum Dimensions & Geometry
  • Inner Brake Drum Diameter (Nominal): 180.0 mm.
  • Maximum Wear / Overbore Diameter: 182.0 mm (Discard or replace the drum immediately if the internal surface exceeds this measurement).
  • Outer Brake Drum Diameter: 208.0 mm.
  • Internal Working Height (Friction Surface Width): 34.5 mm – 35.0 mm.
  • Total Structural Height: 63.0 mm.
  • Material Composition: High-thermal cast grey alloy iron. [1, 2, 3, 4]
Wheel Mount & Hub Interface
  • Lug Bolt Hole Arrangement: 4 Holes.
  • Pitch Circle Diameter (PCD): 4 x 100 mm.
  • Centering / Hub Pilot Bore Diameter: 52.0 mm – 52.1 mm.
  • Hub Inner Bearing Bore Intersect (Step 1 / Step 2): 47.0 mm / 52.0 mm.
  • Fastener Bore Diameter: 12.0 mm. [1, 2, 3, 4]
Brake Shoe & Hydraulic System Matching
  • Compatible Brake Shoe Lining Width: 26.0 mm.
  • Rear Wheel Brake Cylinder Bore Diameter: 15.9 mm.
  • Braking System Layout: Leading-trailing mechanical shoe architecture with self-adjusting handbrake synchronization. [1, 2, 3]
Factory Reference & Cross-Identification
  • Suzuki Genuine Factory OEM Part Base: 43511-68K00, 43511-M68K00, 43511M79G50. [1, 2]
  • Nissan Cross-Platform Part Base (Pixo Matrix): 43200-4A00A. [1]
  • Major Aftermarket Cross-Reference Cataloging:
    • Blue Print Code: ADK84713 / ADN14726.
    • Bosch Reference: 0 986 477 263.
    • Brembo Reference: 14.B000.10.
    • Ridex Code: 123B0045. [1, 2, 3]

Nissan Note Model E12 Rear Drum

KSh6,500.00
Core Drum Dimensions & Geometry
  • Inner Brake Drum Diameter (Standard Nominal): 203 mm to 203.4 mm. [1, 2]
  • Maximum Reboring / Wear Limit Diameter: 204.2 mm to 204.45 mm (Replace the drum if the internal diameter exceeds this threshold due to wear or machining). [1, 2]
  • Outer Brake Drum Diameter: Varied by specific factory engine/trim setup:
    • Standard Variant Size: 234 mm.
    • Heavy-Duty / Large Trim Variant Size: 244 mm. [1, 2, 3]
  • Internal Working Height (Friction Surface Width): 50.5 mm to 52 mm. [1, 2]
  • Total Structural Height: 75 mm to 76 mm. [1, 2]
Wheel Mount & Hub Interface
  • Lug Bolt Hole Arrangement: 4 Holes.
  • Pitch Circle Diameter (PCD / Bolt Circle Ø): 4 x 100 mm.
  • Wheel Hub / Centering Base Diameter: 52.4 mm (for the 234mm outer drum configuration) or 55 mm (for the 244mm outer drum configuration).
  • Wheel Fastener Thread Metric: M12 x 1.5. [1, 2, 3, 4, 5, 6, 7]
Brake Shoe & Hydraulic System Matching
  • Compatible Brake Shoe Friction Width: 39 mm.
  • Wheel Brake Cylinder Bore Size: 19.05 mm.
  • Brake System Design Architecture: Bosch / TRW Type trailing-shoe setup. [1, 2]
Factory Reference & Cross-Identification
  • Nissan Genuine OEM Component Part Base: 43206-1HL0A. [1]
  • Major Aftermarket Cross-Reference Cataloging:
    • Kavo Parts Code: BD-6867.
    • Herth+Buss Jakoparts Code: J3401030.
    • Delphi Reference: BF574. [1, 2, 3]

Toyota Mark X Shock

KSh6,500.00
Core Architectural Specifications
  • Suspension Layout: Front Double Wishbone Independent Suspension system. [1, 2]
  • Shock Internal Mechanics: Gas-Charged Monotube (Gas-A-Just) high-pressure tech or Twin-Tube Low Pressure setups depending on the trim package. [1, 2]
  • Adaptive Variable Suspension (AVS): Higher-tier sports packages (e.g., Crown Athlete/Mark X 350S trims) utilize Electronic Actuator-Controlled Shock Absorbers with stepping-motor variable damping control. [1, 2, 3]
  • Mounting Assemblies: Top chassis link anchored by a 3-bolt tower pattern, while the bottom base secures symmetrically to the double-wishbone lower control arm pivot hub. [1, 2]
Dimensional & Functional Alignment
  • Chassis Configurations: Toyota X-Chassis platform (GRX120 / GRX121 First Gen; GRX130 / GRX133 Second Gen).
  • Axle Position Alignment: Front Axle (highly asymmetrical side-specific engineering for left and right positions).
  • Drive Form Profiles: Specialized internal valving layouts split strictly between Rear-Wheel Drive (2WD) chassis footprints and separate specialized heavy-duty cross-sections for All-Wheel Drive (4WD/i-Four) iterations. [1, 2, 3, 4, 5]
Standard Part Numbers & Identification Cross-References
  • Standard 2WD Aftermarket KYB References:
    • Front Right Hand (RH): 551112
    • Front Left Hand (LH): 551113 [1, 2, 3]
  • Factory Genuine OEM Reference Root Bases:
    • 48510-80160, 48510-80414, 48510-80351, 48520-29845. [1, 2, 3]
  • Premium Electronic/AVS Adaptive References:
    • Front Electronic Strut Series: 721001, 721002. [1, 2]
  • Standard 4WD/i-Four Dedicated Shock Codes:
    • Front 4WD Strut Configuration: 551128, 551129.

Suzuki Model Wagon R Complete Shocks

KSh5,000.00
Front Axle Shock Absorber Specifications (Strut Assembly)
    • Suspension Architecture: Independent MacPherson Strut. [1]
    • Shock Internal Mechanics: Gas-Pressure Twin-Tube low-pressure nitrogen gas configuration. [1, 2]
    • Strut Design Type: Structural Suspension Strut (load-bearing element). [1, 2]
    • Mounting Connections: Top Pin chassis mounting fastener (via a single center shaft rod nut nestled in the strut top hat mount) paired with a Bottom Clamp dual-bolt steering knuckle bracket configuration. [1, 2, 3]
    • Piston Rod Outer Diameter: 18 mm. [1]
    • Cylinder Bore Internal Diameter: 27 mm. [1]
    • Outer Strut Tube Diameters: 45 mm base structural body tapering to 30 mm upper step. [1, 2]
    • Front Strut Length Profiles:
        • Maximum Fully Extended Length: 477 mm – 498 mm.
        • Collapsed / Minimum Working Length: 351 mm. [1, 2]
    • Asymmetrical Left/Right Layout: Front struts are side-specific due to directional brake hose tabs and anti-roll bar bracket symmetry. [1, 2]
Rear Axle Shock Absorber Specifications (Dampers)
    • Suspension Architecture: Isolated Trailing Link (ITL) or rigid 3-link axle setup depending on standard 2WD or 4WD chassis configs. [1]
    • Damper Design Type: Telescopic Shock Absorber (non-load bearing standalone unit separated from the coil spring seat). [1, 2]
    • Mounting Connections: Top Eyelet / Bottom Eyelet sleeve bushing pins (secured with 85 Nm factory mounting torque values). [1, 2, 3]
    • Outer Shell Core Diameter: ~38 mm. [1]
    • Rear Shock Length Profiles:
        • Maximum Fully Extended Length: 401 mm – 412 mm.
        • Collapsed / Minimum Working Length: 270 mm. [1, 2, 3]
Genuine Factory & Aftermarket Identification Numbers
  • Suzuki Genuine Factory OEM Part Roots:
      • Front Struts: 41602-62C00, 41602-85200, 41602-85201, 41602-M55RA0.
      • Rear Shocks: 41800-M70F50, 41800-70K00, 41800-58JC1. [1, 2, 3]
  • KYB (Excel-G Series) Component Cross-References:
    • Front Right Strut: 333306 / 334464
    • Front Left Strut: 333307

Mazda Verisa Wheel Hub Bearing

KSh4,500.00
Front Wheel Bearing Specifications (Press-In Sealed Type)
  • Inner Diameter (ID): 39 mm
  • Outer Diameter (OD): 72 mm
  • Width / Thickness: 37 mm
  • Bearing Type: Sealed Angular Contact Double-Row Ball Bearing (Press-in style).
  • Axle Location: Front Axle (Left / Right symmetric).
  • Genuine Mazda OEM Numbers: D350-33-047A, D350-33-047B, D351-33-047A, D351-33-047B, D651-33-047A, D651-33-047B.
  • Aftermarket Cross-Reference: Febest DAC39720037M, NTN/SNR AU0847-6LX3L/L588. [1, 2, 3, 4]
Rear Wheel Bearing Specifications (4WD Hub Unit / 2WD Integrated Hub)
  • Chassis Configurations:
    • 2WD (Front-Wheel Drive): Uses a standalone press-in bearing or an integrated rear hub assembly.
    • 4WD (All-Wheel Drive): Uses a complete, bolt-on third-generation wheel hub assembly unit. [1, 2, 3]
  • 2WD Rear Bearing Dimensions: Inner: 29 mm | Outer: 53 mm | Thickness: 37 mm. [1]
  • 4WD Rear Hub Splines: 24 Internal Spline Teeth. [1]
  • Material Composition: GCr15 High-Carbon Chromium Bearing Steel (Rings, Balls, and Rollers) with 55# structural steel hub flanges. [1]
  • Genuine Mazda OEM Numbers (Rear): D350-26-151A, D350-26-151B, D350-26-151C (2WD) | D471-26-15X, D471-26-15XA (4WD). [1, 2]
  • Aftermarket Cross-Reference (Rear): Febest DAC29530037, PFI PW29530037CSHDM. [1, 2]

Subaru Legacy Model BH5 Front Shocks

KSh5,000.00
Core Architectural Specifications
    • Suspension Type: Independent MacPherson Strut.
    • Strut Design: Structural Suspension Strut (acts as a load-bearing member).
    • Internal Construction: Gas-Charged Twin-Tube (low-pressure nitrogen gas).
    • Damping Medium: Hydraulic fluid with nitrogen gas charge to prevent aeration.
    • Mounting Configuration: 3-bolt top hat mount chassis connection with a bottom dual-bolt steering knuckle eye bracket.
Dimensional & Fitment Data
    • Chassis Application: Third-Generation Subaru Legacy Touring Wagon (BH5).
    • Axle Placement: Front Axle (side-specific asymmetrical left/right design).
    • Drive Configuration Compatibility: Symmetric All-Wheel Drive (AWD) / Front-Wheel Drive (FWD).
Part Numbers & Factory Cross-References
    • KYB (Excel-G Series) Aftermarket Numbers:
        • Right Hand (Front Driver's Side): 334273
        • Left Hand (Front Passenger's Side): 334274
    • Subaru Genuine OEM Numbers:
        • Right Hand: 20310AE100
        • Left Hand: 20310AE110

Subaru Impreza Drive Shafts

Original price was: KSh8,000.00.Current price is: KSh6,500.00.

Upgrade your drivetrain’s reliability and smoothness with these high-quality Drive Shafts for the Subaru Impreza. Sourced as genuine Ex-Japan parts, they are engineered to deliver efficient power transfer and eliminate vibrations, ensuring your Symmetrical All-Wheel Drive system performs at its peak.

PRICE: KSh 6,500

COMPATIBILITY: Precision-engineered for the Subaru Impreza series (GC, GD, GH, and GE models).

Mercedes-Benz W203 C-Class Shock Absorbers

Original price was: KSh7,500.00.Current price is: KSh6,000.00.
Genuine Mercedes W203 Shocks for KSh 6,000. Grade A Ex-Japan quality for executive comfort, high-speed German stability, and silent cabin refinement.
  • Price: KSh 6,000

  • Condition: Ex-Japan Grade A (Certified high-pressure; leak-tested for German specs)

  • Personality: "The Executive Glide." Engineered to restore the legendary Mercedes-Benz "Magic Carpet" ride.

  • Compatibility: Premium Grade A Ex-Japan suspension struts: Fits Mercedes-Benz C-Class W203 (2000–2007) models, including the C180, C200, C230, and C240 (Sedan, Kompressor, and Wagon variants)

Honda N-WGN Shock Absorbers

Original price was: KSh5,500.00.Current price is: KSh4,500.00.

Upgrade your vehicle's ride quality and stability with these high-performance Shock Absorbers for the Honda N-WGN. Sourced as premium Ex-Japan parts, they are engineered to provide superior damping and comfort, ensuring your "Kei car" remains smooth and easy to handle on all road surfaces.

PRICE: KSh 4,500

COMPATIBILITY: Precision-engineered for the Honda N-WGN series (JH1 and JH2 models).

Mazda Verisa Brake Discs

Original price was: KSh3,500.00.Current price is: KSh2,500.00.

Upgrade your vehicle's stopping power and safety with these high-performance Brake Discs for the Mazda Verisa. Sourced as premium Ex-Japan parts, they provide a smooth and flat surface for your brake pads to grip, ensuring shorter stopping distances and consistent braking performance.

PRICE: KSh 2,500

COMPATIBILITY: Precision-engineered for the Mazda Verisa series (DC5W and DC5R models).

Suzuki Swift K12B Automatic Gearbox (2012 Model)

Original price was: KSh46,500.00.Current price is: KSh45,000.00.

Restore your vehicle's smooth shifting and fuel efficiency with this high-performance K12B Automatic Gearbox for the 2012 Suzuki Swift. Sourced as a genuine Ex-Japan unit, it is engineered for precision power delivery and seamless gear transitions, ensuring your Swift drives like new.

PRICE: KSh 45,000

COMPATIBILITY: Precision-engineered for the 2012 Suzuki Swift (ZC72S/ZD72S) equipped with the 1.2L K12B engine.

Subaru Legacy BP Rear Wheel Hub

Original price was: KSh9,000.00.Current price is: KSh8,000.00.

Upgrade your vehicle's handling and eliminate disruptive road noise with this high-durability Rear Wheel Hub for the Subaru Legacy BP. Sourced as a genuine Ex-Japan part, it is engineered to withstand the specific stresses of the Symmetrical All-Wheel Drive system, ensuring smooth rotation and maximum safety.

PRICE: KSh 8,000

COMPATIBILITY: Precision-engineered specifically for the Subaru Legacy BP series (2003–2009).

Toyota Probox Wheel Hub Bearing (Old Model)

Original price was: KSh6,000.00.Current price is: KSh5,000.00.

Upgrade your vehicle’s ride quality and safety with this high-performance Wheel Hub Bearing for the old model Toyota Probox. Sourced as a genuine Ex-Japan part, it is engineered to provide silent rotation and reduce friction, ensuring your workhorse remains reliable and smooth on the road.

PRICE: KSh 5,000

COMPATIBILITY: Precision-engineered for the Toyota Probox (NCP50, NCP51, NCP55, and NLP51 series).

Subaru Forester SG5 Bilstein Shock Absorbers

Original price was: KSh8,000.00.Current price is: KSh7,000.00.

Upgrade your vehicle's handling and sport performance with these premium Bilstein Shock Absorbers for the Subaru Forester SG5. Sourced as genuine Ex-Japan parts, these pressurized gas shocks provide superior damping and stability, perfect for the driver who demands a firmer, more controlled ride.

PRICE: KSh 7,000

COMPATIBILITY: Precision-engineered for the Subaru Forester SG5 series (2002–2007).

Toyota Corolla Rear Brake Drums (AE100 Model)

Original price was: KSh4,500.00.Current price is: KSh3,500.00.

Upgrade your vehicle's braking reliability and safety with these high-quality Rear Brake Drums for the Toyota Corolla AE100. Sourced as genuine Ex-Japan parts, they provide a smooth, consistent friction surface to ensure effective stopping power and a stable parking brake system.

PRICE: KSh 3,500

COMPATIBILITY: Precision-engineered specifically for the Toyota Corolla AE100 series (1991–1995).

Toyota Fielder Rear Brake Drums

Original price was: KSh5,000.00.Current price is: KSh4,000.00.

Upgrade your vehicle's braking reliability and safety with these high-quality Rear Brake Drums for the Toyota Fielder. Sourced as genuine Ex-Japan parts, they provide a smooth, consistent friction surface to ensure effective stopping power and a stable parking brake system.

PRICE: KSh 4,000

COMPATIBILITY: Precision-engineered for the Toyota Fielder series (NZE141, NZE144, and NZE161 models).

Daihatsu Mira Lower Control Arms

Original price was: KSh5,500.00.Current price is: KSh4,000.00.

Upgrade your vehicle's suspension stability and steering response with these high-quality Lower Control Arms for the Daihatsu Mira. Sourced as genuine Ex-Japan parts, they provide the structural strength and precision needed to maintain a smooth, safe, and balanced ride.

PRICE: KSh 4,000

COMPATIBILITY: Precision-engineered for the Daihatsu Mira series (L275/L285 and LA300/LA310 models).

Toyota Fielder Lower Ball Joints (2013 Model)

Original price was: KSh1,600.00.Current price is: KSh1,500.00.

Upgrade your vehicle's steering safety and front-end stability with these high-quality Lower Ball Joints for the 2013 Toyota Fielder. Sourced as genuine Ex-Japan parts, they ensure smooth pivoting of the steering knuckles and eliminate dangerous wheel play for a more controlled driving experience.

PRICE: KSh 1,500

COMPATIBILITY: Precision-engineered for the 2013 Toyota Fielder (NZE161/NZE164 series).

Toyota Voxy Rear Beam

Original price was: KSh19,500.00.Current price is: KSh18,000.00.

Upgrade your vehicle's structural integrity and rear-end stability with this genuine Ex-Japan Rear Beam for the Toyota Voxy. Engineered to maintain perfect wheel alignment and support the heavy loads of an 8-seater van, this beam ensures a safe and level ride for your family.

PRICE: KSh 18,000

COMPATIBILITY: Precision-engineered for the Toyota Voxy (ZRR70 / ZRR75 series).

Suzuki Swift Lower Control Arms (2012 Model)

Original price was: KSh5,000.00.Current price is: KSh4,000.00.

Upgrade your vehicle's suspension geometry and steering precision with these high-quality Lower Control Arms for the 2012 Suzuki Swift. Sourced as genuine Ex-Japan parts, they provide the structural integrity needed for a stable, comfortable, and safe driving experience.

PRICE: KSh 4,000

COMPATIBILITY: Precision-engineered for the 2012 Suzuki Swift (ZC72S/ZD72S series).

Subaru Impreza Drive Shafts

Original price was: KSh7,500.00.Current price is: KSh6,500.00.

Upgrade your drivetrain’s reliability and smoothness with these high-quality Drive Shafts for the Subaru Impreza. Sourced as genuine Ex-Japan parts, they are engineered to deliver efficient power transfer and eliminate vibrations, ensuring your Symmetrical All-Wheel Drive system performs at its peak.

PRICE: KSh 6,500

COMPATIBILITY: Precision-engineered for the Subaru Impreza series (GC, GD, GH, and GE models).

Nissan Tiida Wheel Hub Bearing

Original price was: KSh4,500.00.Current price is: KSh3,500.00.

Nissan Tiida Brake Caliper

Original price was: KSh4,000.00.Current price is: KSh3,000.00.

Upgrade your vehicle's braking safety and reliability with this high-quality Brake Caliper for the Nissan Tiida. Sourced as a genuine Ex-Japan part, it ensures smooth piston retraction and consistent clamping force for a safer, more responsive braking experience.

PRICE: KSh 3,000

COMPATIBILITY: Precision-engineered for the Nissan Tiida series (C11 models, including Hatchback and Latio).

Toyota Passo Sette Shocks

Original price was: KSh7,800.00.Current price is: KSh6,500.00.
  • Price: KSh 6,500

  • Condition: Ex-Japan Grade A (Certified high-pressure, family-load tested)

  • Personality: "The Family Protector." Engineered for maximum passenger comfort and heavy-load stability.

  • Compatibility: Grade A Ex-Japan suspension struts: Fits Toyota Passo Sette (M502E, M512E) and its sibling, the Daihatsu Boon Luminas (2008–2012)

Subaru Forester SH5 Complete Shock Absorbers

Original price was: KSh12,000.00.Current price is: KSh10,000.00.
Genuine Subaru Forester SH5 Complete Shocks for KSh 10,000. Grade A Ex-Japan quality including springs and mounts for superior AWD stability and ride height.
  • Price: KSh 10,000

  • Condition: Ex-Japan Grade A (Complete unit: Strut, Spring, and Top Mount)

  • Personality: "The All-Road Legend." Restores the perfect balance between highway comfort and off-road toughness.

  •  Compatibility: Grade A Ex-Japan complete strut assembly: Optimized for Subaru Forester SH5 (2.0X / 2.0XS) models (2008–2012).

2010 Mazda Demio Wheel Hub

Original price was: KSh5,000.00.Current price is: KSh4,000.00.
Genuine 2010 Mazda Demio Wheel Hub for KSh 4,000. Grade A Ex-Japan quality for silent bearings, perfect ABS performance, and maximum fuel savings.
  • Price: KSh 4,000

  • Condition: Ex-Japan Grade A (Certified low-friction; tested for zero play)

  • Personality: "The Smooth Spinner." Restores that light, effortless, factory-fresh rolling feel.

  • Compatibility: Grade A Ex-Japan Wheel Hub & Bearing unit: Fits 2007–2014 Mazda Demio (DE3FS, DE5FS, DEJFS) and Mazda 2 models.

Original price was: KSh5,000.00.Current price is: KSh4,000.00.
Genuine Mazda Verisa Wheel Hub for KSh 4,000. Grade A Ex-Japan quality for silent bearings, perfect ABS integration, and a smooth city ride.
  • Price: KSh 4,000

  • Condition: Ex-Japan Grade A (Certified low-friction, high-precision recovery)

  • Personality: "The Silent Smooth-Roller." Engineered for effortless movement and long-term reliability.

  • Compatibility: Grade A Ex-Japan Wheel Hub & Bearing unit: Fits Mazda Verisa (DC5W, DC5R) models (2004–2015). (Note: Shared platform with the Mazda Demio DY).

Showing 252 of 641 results
Please select your product
Product has been added to your cart
Compare (0)