Suzuki Alto Rear Drum

(0 Reviews) Write a review
Core Drum Dimensions & Geometry
  • Inner Brake Drum Diameter (Nominal): 180.0 mm.
  • Maximum Wear / Overbore Diameter: 182.0 mm (Discard or replace the drum immediately if the internal surface exceeds this measurement).
  • Outer Brake Drum Diameter: 208.0 mm.
  • Internal Working Height (Friction Surface Width): 34.5 mm – 35.0 mm.
  • Total Structural Height: 63.0 mm.
  • Material Composition: High-thermal cast grey alloy iron. [1, 2, 3, 4]
Wheel Mount & Hub Interface
  • Lug Bolt Hole Arrangement: 4 Holes.
  • Pitch Circle Diameter (PCD): 4 x 100 mm.
  • Centering / Hub Pilot Bore Diameter: 52.0 mm – 52.1 mm.
  • Hub Inner Bearing Bore Intersect (Step 1 / Step 2): 47.0 mm / 52.0 mm.
  • Fastener Bore Diameter: 12.0 mm. [1, 2, 3, 4]
Brake Shoe & Hydraulic System Matching
  • Compatible Brake Shoe Lining Width: 26.0 mm.
  • Rear Wheel Brake Cylinder Bore Diameter: 15.9 mm.
  • Braking System Layout: Leading-trailing mechanical shoe architecture with self-adjusting handbrake synchronization. [1, 2, 3]
Factory Reference & Cross-Identification
  • Suzuki Genuine Factory OEM Part Base: 43511-68K00, 43511-M68K00, 43511M79G50. [1, 2]
  • Nissan Cross-Platform Part Base (Pixo Matrix): 43200-4A00A. [1]
  • Major Aftermarket Cross-Reference Cataloging:
    • Blue Print Code: ADK84713 / ADN14726.
    • Bosch Reference: 0 986 477 263.
    • Brembo Reference: 14.B000.10.
    • Ridex Code: 123B0045. [1, 2, 3]

KSh6,500.00

In stock
Buy now

Description

Product Description: Suzuki Alto (HA24 / HA25 / HA35 / HA36) Rear Brake Drum & Shoe Assembly

Overview

The Rear Brake Drum & Shoe Assembly for the Suzuki Alto (HA24, HA25, HA35, HA36 Chassis Series, 2004–Present) is an OEM-spec rear braking component engineered to deliver dependable stopping power, smooth deceleration, and secure handbrake/parking brake performance. Precision-crafted for Suzuki’s subcompact city car platform, this drum brake system ensures optimal braking balance between the front disc brakes and the rear wheels.

Technical Specifications & Characteristics

  • Vehicle Compatibility: Suzuki Alto (HA24S, HA25S, HA25V, HA35S, HA36S, HA36V Chassis, 2004–Present / Fits Japanese Spec & International Alto models)

  • Position: Rear Axle (Left & Right)

  • Inner Drum Diameter: Approx. 180 mm

  • Pitch Circle Diameter (PCD): 4 x 100 mm

  • Center Bore Diameter: Approx. 54 mm

  • Friction Material: Low-dust, non-asbestos organic (NAO) or semi-metallic friction compound bonded to heavy-duty steel backing plates

  • Construction: High-tensile grey cast iron (G3000 spec) for optimal thermal conductivity and resistance to thermal distortion

Key Features & Performance Benefits

  1. Dependable City Braking: Machined to exact inner diameter tolerances to ensure maximum surface contact with the brake shoes for smooth, immediate stopping response.

  2. Firm Parking Brake Engagement: Restores complete tension and holding capacity for the handbrake cable system, preventing rolling on hills and inclines.

  3. Quiet & Low-Dust Operation: Formulated lining materials minimize squealing, grinding chatter, and dust accumulation inside the drum housing.

  4. Heat Dissipation & Thermal Resistance: Heavy-duty cast iron body effectively channels away frictional heat during frequent stop-and-go city traffic, preventing brake fade.

Variant & OEM Cross-Reference Notes

Because Suzuki produced multiple chassis variations across generations (including Maruti Suzuki Alto 800/K10 and JDM HA series), double-check inner diameter specifications prior to selection:

  • Rear Brake Drum OEM Reference: 43511-68H00, 43511-76G00, 43511-70K00

  • Rear Brake Shoe Set OEM Reference: 53200-58J00, 53200-68H00, 53200-70K00

  • Popular Aftermarket Brands: MK Kashiyama, Akebono, FBK, TRW, Brembo, and LPR.

Reviews

There are no reviews yet.

Be the first to review “Suzuki Alto Rear Drum”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)