Sort

Suzuki Alto Model 2018 Rear Drum

KSh6,500.00
1. Dimensional Specifications
  • Inner Drum Diameter (Working Friction Surface): 180.0 mm
  • Maximum Wear/Reboring Limit (Discard Diameter): 182.0 mm
  • Outer Brake Drum Diameter: 208.0 mm
  • Inner Brake Drum Width / Working Depth: 34.6 mm to 35.0 mm
  • Total Component Height (Overall Thickness): 63.0 mm
  • Centering / Center Bore Diameter: 52.1 mm [1]
2. Wheel Lug Bolt Pattern & Mounting
  • Number of Holes: 4 holes
  • Pitch Circle Diameter (PCD): 4 x 100 mm
  • Hub Bolt Circle (Bore) Diameter: 12.0 mm [1]
3. OEM Part Numbers & Cross-References
  • Suzuki Original Equipment (OE) Codes: 43511-74P00 (Standard Japanese Domestic Market HA36 platform code), 43511-68K00 / 43511-76G50 [1, 2]
  • Major Premium Aftermarket Matches:
    • Blue Print: ADK84709 or ADK84713
    • TRW: DB4424
    • Bosch: 0 986 477 263
    • Maxgear: 19-2625 [1, 2]
4. Architecture & Engineering Layout
  • Drivetrain Position: Rear Axle Only
  • Material Composition: High-thermal cast grey alloy iron
  • Design Type: Integral wheel hub carrier assembly casing (machined outer shell containing the inner hub profile, structurally designed without pre-pressed wheel bearings or pre-fitted wheel studs).
  • Braking System Type: Mechanical leading-trailing shoe setup activated by a dual-piston hydraulic rear wheel cylinder.[1, 2]

Suzuki Alto Model 2017 Rear Drum

KSh6,500.00
1. Dimensional Specifications
  • Inner Drum Diameter (Friction Surface): 180.0 mm
  • Maximum Wear/Reboring Limit (Discard Diameter): 182.0 mm
  • Outer Brake Drum Diameter: 208.0 mm
  • Inner Brake Drum Width / Working Depth: 34.6 mm to 35.0 mm
  • Total Component Height (Overall Thickness): 63.0 mm
  • Centering / Center Bore Diameter: 52.0 mm to 52.1 mm [1, 2, 3, 4]
2. Wheel Lug Bolt Pattern & Mounting
  • Number of Holes: 4 holes
  • Pitch Circle Diameter (PCD): 4 x 100 mm
  • Hub Bolt Hole Diameter: 12.0 mm [1, 2]
3. OEM Part Numbers & Cross-References
  • Suzuki Original Equipment (OE) Codes: 43511-74P00 (HA36 platform standard), 43511-68K00 / 43511-76G50 (Cross-over compatibility codes) [1, 2]
  • Major Premium Aftermarket Matches:
    • Blue Print: ADK84709 or ADK84713
    • TRW: DB4424
    • Bosch: 0 986 477 263 [1, 2]
4. Architecture & Engineering Layout
  • Drivetrain Position: Rear Axle Only
  • Material Composition: High-thermal cast grey alloy iron.
  • Design Type: Integral wheel hub carrier assembly casing (machined outer shell containing the inner hub profile, structurally designed without pre-pressed wheel bearings or pre-fitted wheel studs).
  • Braking System Type: Mechanical leading-trailing shoe setup activated by a hydraulic rear wheel cylinder.

Suzuki Alto Model 2016 Rear Drum

KSh6,500.00
1. Dimensional Specifications
  • Inner Drum Diameter (Working Surface): 180.0 mm
  • Maximum Wear/Reboring Limit (Discard Diameter): 182.0 mm
  • Outer Brake Drum Diameter: 208.0 mm
  • Inner Brake Drum Width / Depth: 35.0 mm
  • Total Component Height (Thickness): 63.0 mm
  • Centering/Center Bore Diameter: 52.0 mm to 52.1 mm [1, 2]
2. Wheel Lug Bolt Pattern & Mounting
  • Number of Holes: 4 holes
  • Pitch Circle Diameter (PCD): 4 x 100 mm
  • Hub Bolt Circle (Bore) Diameter: 12.0 mm [1, 2]
3. OEM Part Numbers & Cross-References
  • Suzuki Original Equipment (OE) Codes: 43511-74P00 (Main code for HA36 platform), 43511-76G50 / 43511-68K00 (GF platform cross-over) [1, 2, 3]
  • Major Premium Aftermarket Matches:
    • Blue Print: ADK84709 or ADK84713
    • TRW: DB4424
    • Bosch: 0 986 477 263 [1, 2]
4. Architecture & Engineering Layout
  • Drivetrain Position: Rear Axle
  • Design Type: Integral wheel hub carrier assembly casing (cast high-thermal grey alloy iron structure without wheel bearings/studs pre-pressed).
  • Braking System Type: Mechanical leading-trailing drum configuration expanding outward via dual-piston rear hydraulic brake cylinders. [1, 2, 3]

Suzuki Alto Model 2015 Rear Drum

KSh6,500.00
1. Dimensional Specifications
    • Inner Drum Diameter (Working Surface): 180.0 mm
    • Maximum Wear/Reboring Limit (Discard Diameter): 182.0 mm
    • Outer Brake Drum Diameter: 208.0 mm
    • Inner Brake Drum Width / Depth: 35.0 mm
    • Total Component Height (Thickness): 63.0 mm
    • Centering/Center Bore Diameter: 52.0 mm [1]
2. Wheel Lug Bolt Pattern & Mounting
    • Number of Holes: 4 holes
    • Pitch Circle Diameter (PCD): 4 x 100 mm
    • Hub Bolt Circle (Bore) Diameter: 12.0 mm [1]
3. OEM Part Numbers & Cross-References
    • Suzuki Original Equipment (OE) Numbers: 43511-76G50, 43511-76G00, 43511-72M00 [1, 2]
    • Major Premium Aftermarket Matches:
        • Blue Print: ADK84709
        • TRW: DB4304B
        • A.B.S.: 2755-S [1]
4. Architecture & Engineering Layout
  • Drivetrain Position: Rear Axle
  • Design Type: Integrated drum assembly designed with an inner cavity to accept the rear wheel bearing unit setup.
  • Braking System Type: Leading-trailing drum brake configuration, driven by dual-piston rear wheel hydraulic cylinders.[1, 2, 3]

Suzuki Alto Model 2014 Rear Drum

KSh6,500.00
1. Dimensional Specifications
  • Inner Drum Diameter (Working Surface): 180.0 mm
  • Maximum Wear/Reboring Limit (Discard Diameter): 182.0 mm
  • Outer Brake Drum Diameter: 208.0 mm
  • Inner Brake Drum Width / Depth: 34.6 mm to 35.0 mm
  • Total Component Height (Depth): 63.0 mm
  • Centering/Center Bore Diameter: 52.0 mm [1, 2]
2. Wheel Lug Bolt Pattern & Mounting
  • Number of Holes: 4 holes
  • Pitch Circle Diameter (PCD): 4 x 100 mm
  • Bore Diameter: 12.0 mm [1]
3. OEM Part Numbers & Cross-References
  • Suzuki Original Equipment (OE) Numbers: 43511-76G00, 43511-76G50 [1]
  • Major Premium Aftermarket Matches:
    • Blue Print: ADK84709
    • Delphi: BF584
    • Ridex: 123B0045 [1, 2]
4. Architecture & Engineering Layout
  • Drivetrain Position: Rear Axle only.
  • Design Type: Integral wheel hub design (the brake drum casing houses the outer wheel hub, built to fit directly over the rear spindle setup).
  • Braking System Type: Standard dual-circuit hydraulic drum brake utilizing leading and trailing brake shoe architecture.

Nissan Note Model E12 Drum

KSh6,500.00
Dimensional & Structural Specifications
  • Inner Brake Drum Diameter: 203 mm (Standard baseline nominal dimension).
  • Maximum Wear/Reboring Limit: 204.5 mm (The drum must be discarded and replaced if the inner surface wears past this diameter).
  • Inner Friction Height (Shoe Contact Width): 50.5 mm to 52 mm.
  • Total Exterior Drum Height: 75 mm to 76 mm.
  • Outer Total Diameter: 234 mm or 244 mm (Depending on the specific sub-trim and brake dust shield casing shape).
  • Bolt Pattern (PCD): 4 x 100 mm (4 lug holes spaced on a 100mm pitch circle).
  • Center Wheel Hub Bore Size: 52 mm to 55 mm.
  • Compatible Rear Brake Shoe Size: 203 mm x 38 mm. [1, 2, 3, 4, 5, 6]
Hydraulic System Configurations
  • Wheel Cylinder Bore Piston Diameter: 19.1 mm.
  • Adjustment System: Mechanical ratchet assembly with automatic self-adjustment activated whenever the parking brake is engaged.
  • ABS Integration: The drum housing sits flush over an integrated tone ring or wheel hub speed sensor assembly depending on whether the wheel bearing is pressed straight into the drum assembly. [1, 2, 3]
Factory Fastener Torque Specifications
Crucial Assembly Rule: When tightening the primary spindle center hub nut to retain the brake drum/bearing layout, you must rotate the brake drum concurrently by hand to prevent damaging the internal bearing shells or crushing the outer races. [1]
Connection Location Metric Spec (N·m) Imperial Spec (ft-lbs)
Main Rear Spindle Center Hub Nut (30mm Axle Socket) 240 N·m 177 ft-lbf
Wheel Lug Nuts (Attaching wheel to drum flange) 114 N·m 84 ft-lbf
Brake Backing Plate to Rear Axle Beam Bolts 55 N·m 41 ft-lbf
Wheel Cylinder Mounting Bolt 10 N·m 7.5 ft-lbf

Suzuki Alto Rear Drum

KSh6,500.00
Core Drum Dimensions & Geometry
  • Inner Brake Drum Diameter (Nominal): 180.0 mm.
  • Maximum Wear / Overbore Diameter: 182.0 mm (Discard or replace the drum immediately if the internal surface exceeds this measurement).
  • Outer Brake Drum Diameter: 208.0 mm.
  • Internal Working Height (Friction Surface Width): 34.5 mm – 35.0 mm.
  • Total Structural Height: 63.0 mm.
  • Material Composition: High-thermal cast grey alloy iron. [1, 2, 3, 4]
Wheel Mount & Hub Interface
  • Lug Bolt Hole Arrangement: 4 Holes.
  • Pitch Circle Diameter (PCD): 4 x 100 mm.
  • Centering / Hub Pilot Bore Diameter: 52.0 mm – 52.1 mm.
  • Hub Inner Bearing Bore Intersect (Step 1 / Step 2): 47.0 mm / 52.0 mm.
  • Fastener Bore Diameter: 12.0 mm. [1, 2, 3, 4]
Brake Shoe & Hydraulic System Matching
  • Compatible Brake Shoe Lining Width: 26.0 mm.
  • Rear Wheel Brake Cylinder Bore Diameter: 15.9 mm.
  • Braking System Layout: Leading-trailing mechanical shoe architecture with self-adjusting handbrake synchronization. [1, 2, 3]
Factory Reference & Cross-Identification
  • Suzuki Genuine Factory OEM Part Base: 43511-68K00, 43511-M68K00, 43511M79G50. [1, 2]
  • Nissan Cross-Platform Part Base (Pixo Matrix): 43200-4A00A. [1]
  • Major Aftermarket Cross-Reference Cataloging:
    • Blue Print Code: ADK84713 / ADN14726.
    • Bosch Reference: 0 986 477 263.
    • Brembo Reference: 14.B000.10.
    • Ridex Code: 123B0045. [1, 2, 3]

Nissan Note Model E12 Rear Drum

KSh6,500.00
Core Drum Dimensions & Geometry
  • Inner Brake Drum Diameter (Standard Nominal): 203 mm to 203.4 mm. [1, 2]
  • Maximum Reboring / Wear Limit Diameter: 204.2 mm to 204.45 mm (Replace the drum if the internal diameter exceeds this threshold due to wear or machining). [1, 2]
  • Outer Brake Drum Diameter: Varied by specific factory engine/trim setup:
    • Standard Variant Size: 234 mm.
    • Heavy-Duty / Large Trim Variant Size: 244 mm. [1, 2, 3]
  • Internal Working Height (Friction Surface Width): 50.5 mm to 52 mm. [1, 2]
  • Total Structural Height: 75 mm to 76 mm. [1, 2]
Wheel Mount & Hub Interface
  • Lug Bolt Hole Arrangement: 4 Holes.
  • Pitch Circle Diameter (PCD / Bolt Circle Ø): 4 x 100 mm.
  • Wheel Hub / Centering Base Diameter: 52.4 mm (for the 234mm outer drum configuration) or 55 mm (for the 244mm outer drum configuration).
  • Wheel Fastener Thread Metric: M12 x 1.5. [1, 2, 3, 4, 5, 6, 7]
Brake Shoe & Hydraulic System Matching
  • Compatible Brake Shoe Friction Width: 39 mm.
  • Wheel Brake Cylinder Bore Size: 19.05 mm.
  • Brake System Design Architecture: Bosch / TRW Type trailing-shoe setup. [1, 2]
Factory Reference & Cross-Identification
  • Nissan Genuine OEM Component Part Base: 43206-1HL0A. [1]
  • Major Aftermarket Cross-Reference Cataloging:
    • Kavo Parts Code: BD-6867.
    • Herth+Buss Jakoparts Code: J3401030.
    • Delphi Reference: BF574. [1, 2, 3]

Toyota Corolla Rear Brake Drums (AE100 Model)

Original price was: KSh4,500.00.Current price is: KSh3,500.00.

Upgrade your vehicle's braking reliability and safety with these high-quality Rear Brake Drums for the Toyota Corolla AE100. Sourced as genuine Ex-Japan parts, they provide a smooth, consistent friction surface to ensure effective stopping power and a stable parking brake system.

PRICE: KSh 3,500

COMPATIBILITY: Precision-engineered specifically for the Toyota Corolla AE100 series (1991–1995).

Toyota Fielder Rear Brake Drums

Original price was: KSh5,000.00.Current price is: KSh4,000.00.

Upgrade your vehicle's braking reliability and safety with these high-quality Rear Brake Drums for the Toyota Fielder. Sourced as genuine Ex-Japan parts, they provide a smooth, consistent friction surface to ensure effective stopping power and a stable parking brake system.

PRICE: KSh 4,000

COMPATIBILITY: Precision-engineered for the Toyota Fielder series (NZE141, NZE144, and NZE161 models).

Premio 240 Rear Drum

Original price was: KSh5,600.00.Current price is: KSh3,500.00.
A healthy brake drum is critical for your parking brake to hold your car on a hill. Replacing your worn drum with this original unit ensures your handbrake stays tight and your stops stay silent.
  • Part: Rear Brake Drum.

  • Condition: Grade A Ex-Japan (Foreign Used).

  • Compatibility: Fits Toyota Premio 240 and Allion 240 models 2001–2007. Also compatible with Toyota Prius (NHW20) and Toyota Celica (ZZT230).

  • Benefit: Restores original braking power and parking brake efficiency.

  • Price: KSh 3,500

Please select your product
Product has been added to your cart
Compare (0)