Suzuki Alto Model 2017 Rear Drum

(0 Reviews) Write a review
1. Dimensional Specifications
  • Inner Drum Diameter (Friction Surface): 180.0 mm
  • Maximum Wear/Reboring Limit (Discard Diameter): 182.0 mm
  • Outer Brake Drum Diameter: 208.0 mm
  • Inner Brake Drum Width / Working Depth: 34.6 mm to 35.0 mm
  • Total Component Height (Overall Thickness): 63.0 mm
  • Centering / Center Bore Diameter: 52.0 mm to 52.1 mm [1, 2, 3, 4]
2. Wheel Lug Bolt Pattern & Mounting
  • Number of Holes: 4 holes
  • Pitch Circle Diameter (PCD): 4 x 100 mm
  • Hub Bolt Hole Diameter: 12.0 mm [1, 2]
3. OEM Part Numbers & Cross-References
  • Suzuki Original Equipment (OE) Codes: 43511-74P00 (HA36 platform standard), 43511-68K00 / 43511-76G50 (Cross-over compatibility codes) [1, 2]
  • Major Premium Aftermarket Matches:
    • Blue Print: ADK84709 or ADK84713
    • TRW: DB4424
    • Bosch: 0 986 477 263 [1, 2]

4. Architecture & Engineering Layout
  • Drivetrain Position: Rear Axle Only
  • Material Composition: High-thermal cast grey alloy iron.
  • Design Type: Integral wheel hub carrier assembly casing (machined outer shell containing the inner hub profile, structurally designed without pre-pressed wheel bearings or pre-fitted wheel studs).
  • Braking System Type: Mechanical leading-trailing shoe setup activated by a hydraulic rear wheel cylinder.

KSh6,500.00

In stock
Buy now

Description

Product Overview

The Rear Brake Drum is an essential part of the vehicle’s rear braking and parking system. When you press the foot brake or pull the handbrake, the hydraulic wheel cylinders push the brake shoes outward, causing them to create friction against the inner matching surface of this spinning cast-iron drum to decelerate or hold the vehicle securely.

Key Technical Specifications

(Standard dimensions for the 2017 Suzuki Alto rear brake drum across major aftermarket and OEM specifications):

  • Fitting Position: Rear Axle (Left and Right sides)

  • Inner Diameter (Working Surface): 180.0 mm

  • Outer Diameter: 208.0 mm

  • Total Drum Height: Approx. 63.0 mm

  • Friction Face / Shoe Track Width: 34.5 mm – 35.0 mm

  • Number of Bolt Holes: 4 Holes

  • Bolt Hole Circle Diameter (PCD): 100.0 mm

  • Center Hub / Centering Hole Diameter: 52.0 mm

  • Maximum Reboring / Wear Limit: 182.0 mm (The drum must be replaced if inner wear exceeds this safety threshold)

Material & Build Quality

  • Material Composition: Formulated from high-strength grey cast iron, engineered to handle heavy thermal cycling, friction heat, and physical stress without warping or cracking.

  • Coating: Many quality aftermarket and OEM variants include an anti-corrosion protective surface coating on non-friction exterior areas to prevent unsightly rust formation and degradation from road salt and moisture.

OEM & Cross-Reference Part Numbers

  • Suzuki OEM Part Numbers: 43511-74P00, 43511-84S00

  • Common Aftermarket Equivalents: Available from manufacturers like ATE (24.0218-0039.1), Blueprint, TRW, and Bosch.

When to Service or Replace

Consider inspection or replacement if you experience:

  1. Scored Surfaces: Deep grooves or scoring lines visible on the inner drum wall.

  2. Brake Pulsation: A vibrating brake pedal or shuddering handbrake when slowing down.

  3. Reduced Braking Performance: Needing more travel distance on the handbrake lever or pedal.

  4. Wear Limit Reached: If an internal caliper measurement shows the diameter has worn past 182 mm, structural integrity is compromised and replacement is mandatory.

Reviews

There are no reviews yet.

Be the first to review “Suzuki Alto Model 2017 Rear Drum”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)