Suzuki Alto Model 2016 Rear Drum

(0 Reviews) Write a review
1. Dimensional Specifications
  • Inner Drum Diameter (Working Surface): 180.0 mm
  • Maximum Wear/Reboring Limit (Discard Diameter): 182.0 mm
  • Outer Brake Drum Diameter: 208.0 mm
  • Inner Brake Drum Width / Depth: 35.0 mm
  • Total Component Height (Thickness): 63.0 mm
  • Centering/Center Bore Diameter: 52.0 mm to 52.1 mm [1, 2]
2. Wheel Lug Bolt Pattern & Mounting
  • Number of Holes: 4 holes
  • Pitch Circle Diameter (PCD): 4 x 100 mm
  • Hub Bolt Circle (Bore) Diameter: 12.0 mm [1, 2]
3. OEM Part Numbers & Cross-References
  • Suzuki Original Equipment (OE) Codes: 43511-74P00 (Main code for HA36 platform), 43511-76G50 / 43511-68K00 (GF platform cross-over) [1, 2, 3]
  • Major Premium Aftermarket Matches:
    • Blue Print: ADK84709 or ADK84713
    • TRW: DB4424
    • Bosch: 0 986 477 263 [1, 2]

4. Architecture & Engineering Layout
  • Drivetrain Position: Rear Axle
  • Design Type: Integral wheel hub carrier assembly casing (cast high-thermal grey alloy iron structure without wheel bearings/studs pre-pressed).
  • Braking System Type: Mechanical leading-trailing drum configuration expanding outward via dual-piston rear hydraulic brake cylinders. [1, 2, 3]

KSh6,500.00

In stock
Buy now

Description

Product Overview

The Rear Brake Drum is a crucial component of the vehicle’s rear wheel braking system. When the parking brake is engaged or the foot brake is applied, the brake shoes press outward against the inner surface of this rotating cast-iron/steel drum, generating friction to safely slow down or stop the vehicle.

Key Technical Specifications

(Note: Dimensions can slightly vary based on exact manufacturing region/ABS configuration, but standard specifications for the 2016 Suzuki Alto rear drum include:)

  • Fitting Position: Rear Axle (Left & Right sides)

  • Inner Diameter (Working Surface): 180.0 mm

  • Outer Diameter: 208.0 mm

  • Total Drum Height: Approx. 52.0 mm to 63.0 mm (varies by hub design)

  • Brake Drum Width / Face Width: 34.5 mm – 35.0 mm

  • Number of Bolt/Stud Holes: 4 Holes

  • Bolt Hole Circle Diameter (PCD): 100.0 mm

  • Centering / Hub Diameter: 52.0 mm

  • Max. Reboring Limit (Wear Limit): 182.0 mm (drums should be replaced if inner wear exceeds this diameter)

Material & Build Quality

  • Material: High-grade grey cast iron, engineered to withstand high thermal stress, friction, and rapid heating/cooling cycles without warping.

  • Surface Finish: Anti-corrosion coated outer shell or plain machined surface depending on the aftermarket brand (such as Blue Print, Brembo, TRW, or OEM Maruti Suzuki parts) to prevent rust buildup on non-friction surfaces.

Common OEM / Cross-Reference Part Numbers

  • Suzuki OEM Numbers: 43511M79G50, 43511M79G51, 43511-74L00

  • Common Aftermarket Equivalents: Blue Print (ADN14726), APEC (DRM9975), ABS (2897-S)

When to Replace Your Rear Brake Drums

You should inspect or replace your rear brake drums if you notice:

  1. Scoring or Grooving: Deep grooves worn into the inner friction surface.

  2. Vibration/Pulsation: Vibrations felt through the brake pedal or handbrake lever when stopping.

  3. Out-of-Roundness: Causing uneven braking or dragging sounds.

  4. Exceeding Wear Limit: If the inner diameter exceeds 182 mm, the drum is too thin structurally and must be swapped out for safety.

Reviews

There are no reviews yet.

Be the first to review “Suzuki Alto Model 2016 Rear Drum”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)