Honda Insight Model 2010 Lower Control Arm

(0 Reviews) Write a review
OEM / Reference Part Numbers

  • Front Left Side (LHS): 51360-TK6-A01 / 51360-TF5-A00 / 51360-TG5-C01
  • Front Right Side (RHS): 51350-TK6-A01 / 51350-TF5-A00 / 51350-TM8-A01 / 51350-TG5-C01 [1, 2, 3]
Dimensional Specifications

  • Ball Joint Cone Size / Pivot Diameter: Ø 17.5 mm
  • Ball Pin / Joint External Thread Size: M14 x 1.5
  • Subframe Flange Mounting Bolt Compatibility: Matches 17 mm and 19 mm factory hex flange bolt configurations.
Material & Component Properties

  • Structural Material: Heavy-duty stamped sheet steel matrix engineered for optimized vehicle weight distribution and strength.
  • Pre-assembled Bushings: Features a large, rearward horizontal rubber compliance damper (“hockey puck” style bushing) paired with a forward horizontal inner steel sleeve bushing to absorb road vibrations and isolate Cabin NVH (Noise, Vibration, and Harshness). [1, 2]
  • Ball Joint Assembly: Integrated pre-greased, sealed heavy-duty lower ball joint with a high-flexibility protective rubber dust boot. [1]
  • Surface Coating: High-durability black anti-corrosion electro-deposition paint (E-coating) for rust prevention.
  • Net Unit Weight: ~3.3 kg to 4.7 kg per side (depending on whether it is a bare aftermarket steel variant or a complete factory assembly with bracket layout). [1, 2]

KSh4,000.00

In stock
Buy now

Description

Product Overview

The Front Lower Control Arm is a critical structural suspension and guidance component on the 2010 Honda Insight (ZE2). Acting as the primary connection between the vehicle’s unibody subframe and the front wheel knuckle assembly (via the integrated ball joint), this component is engineered specifically for Honda’s dedicated hybrid platform to maintain precise front-wheel alignment, absorb cornering and braking forces, and deliver stable, aerodynamic handling while accommodating the vehicle’s unique weight distribution.

Key Technical Specifications

(Standard specifications for the 2010 Honda Insight ZE2 lower control arm):

  • Fitting Position: Front Axle (Available separately for Left / Passenger Side and Right / Driver Side)

  • Compatibility: Fits all ZE2-generation Honda Insight hybrid hatchback variants (2009–2014, 1.3L LDA-MF6 IMA hybrid powertrain).

  • Design Type: Pressed-steel wishbone arm assembly complete with pre-pressed rubber inner bushings and a factory-integrated outer ball joint.

Material & Build Quality

  • Material Composition: High-tensile stamped steel designed to provide maximum structural rigidity and impact resistance while keeping unsprung weight low to maximize energy efficiency and fuel economy.

  • Component Integration: Fitted with heavy-duty vulcanized rubber bushings to isolate road harshness from the hybrid’s lightweight chassis, paired with a precision-machined ball joint sealed inside a heavy-duty, grease-retaining rubber dust boot.

  • Corrosion Protection: Finished with an industrial anti-corrosion coating to resist moisture, road salt, and environmental debris over years of daily commuting.

OEM & Cross-Reference Part Numbers

  • Honda OEM Part Numbers:

    • Right Side (Driver): 51350-TM8-000 / 51350-TM8-T00 (or regional platform variants)

    • Left Side (Passenger): 51360-TM8-000 / 51360-TM8-T00 (or regional platform variants)

  • Popular Aftermarket Brands: Febest, GSP, CTR, NTY, and Japanparts.

Function & Importance

  1. Wheel Alignment Stability: Secures the lower wheel assembly in place, ensuring that caster and camber angles remain true during dynamic driving and regenerative braking.

  2. Impact & Vibration Isolation: The integrated rubber bushings filter out small bumps, rough pavement texture, and high-frequency vibrations before they reach the steering system.

  3. Load Transfer: Safely transmits vertical wheel loads and lateral steering forces between the front wheels and the vehicle chassis.

Common Signs of a Worn Lower Control Arm on a 2010 Honda Insight

When the rubber bushings crack or tear, or when the ball joint develops excessive internal play due to high mileage, your Honda Insight will typically display these warning signs:

  • Clunking or Knocking Noises: A sharp metallic snap, pop, or hollow thud from the front suspension when driving over speed bumps, potholes, or turning the steering wheel.

  • Vague or Wandering Steering: An unstable, loose steering feel where the car drifts or pulls to one side, requiring constant steering corrections at highway speeds.

  • Uneven Front Tire Wear: Rapid or irregular feathering along the inner or outer tread edges of the front tires caused by shifting wheel alignment geometry.

Reviews

There are no reviews yet.

Be the first to review “Honda Insight Model 2010 Lower Control Arm”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)