Mazda Demio Model 2015 Lower Control Arm

(0 Reviews) Write a review
1. Dimensional & Sizing Specifications
  • Total Component Length: 350 mm
  • Total Component Height: 82 mm
  • Component Width: ~50 mm (at base structural track)
  • Ball Joint Cone/Pin Size: Ø 16 mm
  • Thread Size / Fitting Type: Pinch Bolt alignment configuration (16 mm)
  • Inner Bushing Bolt Hole Diameter: 10.4 mm [1, 2]
2. OEM Part Numbers & Cross-References
  • Left-Hand Side (LH):
    • Mazda Original Equipment (OE) Codes: DA6A-34-350C, D201-34-350B, DA7H-34-350
    • Major Aftermarket Match: Delphi TC3286 [1, 2]

  • Right-Hand Side (RH):
    • Mazda Original Equipment (OE) Codes: D23H-34-300, DA7H-34-300B, D201-34-300B
    • Major Aftermarket Match: Delphi TC3287 [1, 2, 3, 4]

3. Material & Component Architecture
  • Structural Material: High-tensile forged or stamped carbon steel alloy finished with an anti-corrosion black powder layer. [1, 2]
  • Pre-Assembled Bushings: Premium vulcanized natural rubber silent-block bushings (one forward cylindrical pivot bushing and one large rear compliance load bushing) engineered to minimize cabin NVH (Noise, Vibration, and Harshness). [1]
  • Ball Joint Mechanism: Maintenance-free, non-adjustable, factory-sealed, pre-greased low-friction ball joint enclosed in a flexible neoprene protective dust boot. [1]
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Mazda Demio / Mazda 2 Hatchback and Sedan (CBA-DJLFS, DBA-DJ3FS, DJ5FS, DJ5AS 4WD).
  • Powertrain Compatibility: 1.3L SkyActiv-G (P3-VPS), 1.5L SkyActiv-G (F5-VPT), and 1.5L SkyActiv-D Diesel (S5-DPTS).
  • Platform Sharing: Shared geometric subframe attachment layout with the Toyota Yaris / Yaris iA (2016+ North American variants derived from the Mazda DJ platform partnership). [1, 2]

KSh5,500.00

In stock
Buy now

Description

Product Overview

The Front Lower Control Arm is an essential structural component of the Mazda Demio’s independent front MacPherson strut suspension. It serves as the lower pivoting link connecting the front wheel steering knuckle/hub assembly to the vehicle’s subframe. Each replacement arm comes fully pre-assembled as a complete, bolt-on unit—integrating both the outer ball joint and the inner rubber control arm bushings—ensuring straightforward installation without needing specialized presses to service individual bushings.

Key Technical Specifications

(Standard specifications for the 2015 Mazda Demio DJ generation front lower control arm):

  • Fitting Position: Front Axle (Available separately for Left Hand / Passenger Side and Right Hand / Driver Side)

  • Design Type: Pressed-steel A-arm / wishbone construction

  • Included Components:

    • 1 x High-Tensile Stamped Steel Control Arm Body

    • 1 x Pre-pressed Outer Ball Joint

    • 2 x Pre-installed Inner Rubber Control Arm Bushings (Chassis attachment points)

  • Compatibility: Fits DJ-series Mazda Demio / Mazda2 models (equipped with Skyactiv-G petrol or Skyactiv-D diesel engines).

Material & Build Quality

  • Material: Heavy-gauge stamped sheet steel engineered to withstand intense vertical impacts, cornering lateral loads, and rapid braking stresses without flexing or distortion.

  • Surface Protection: Treated with a durable black anti-corrosion electrophoretic or powder-coated finish to safeguard against moisture, road salt, and debris.

  • Bushings & Joints: High-durometer rubber bushings strike an ideal balance between nimble, responsive handling and cabin ride comfort, while the sealed ball-joint boot keeps out dirt to maximize longevity.

OEM & Cross-Reference Part Numbers

  • Mazda OEM Part Numbers:

    • Front Lower Control Arm (Right / RH): DFY1-34-300 / DFY1-34-350 (or region-specific equivalents)

    • Front Lower Control Arm (Left / LH): DFY1-34-350 / DFY1-34-300

  • Popular Aftermarket Brands: TRW, Febest, Moog, NTY, and Japanparts.

Common Signs of Worn Lower Arms on a Mazda Demio

When the rubber bushings crack or the ball joints develop play, a 2015 Mazda Demio will typically exhibit these warning signs:

  1. Clunking or Knocking Noises: Sharp metallic thuds when driving over speed bumps, potholes, or uneven tarmac.

  2. Steering Wandering / Instability: A loose or vague steering response on the highway, requiring frequent minor corrections to keep the car tracking straight.

  3. Uneven Front Tire Wear: Rapid or irregular wear patterns on the inner or outer edges of the front tires due to shifting wheel geometry.

  4. Braking Vibration: A shudder or vibration felt through the steering column when applying the brakes.

Reviews

There are no reviews yet.

Be the first to review “Mazda Demio Model 2015 Lower Control Arm”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)